Mitsubishi Ethernet interface module AJ71QE71N-B5T
Model: AJ71QE71N-B5T.
Interface: 10BASE-T/10BASE5.
Size: 250(H)×37.5(W)×106(D)mm.
Weight: 0.35kg.

Mitsubishi MELSECNET/B data link system AJ72T25B
Model: AJ72T25B.
Department MELSECNET / B Remote I / O.
Shielded twisted-pair data link system.
Connection cable: twisted-pair cable.
Transmission format: single bus.
Size: 250(H)×37.5(W)×135(D)mm.
Weight: 0.58kg.

Mitsubishi Memory Card / Centronics interface module AD59
Model: AD59.
Memory Card / Centronics interface module.
Memory card interface, parallel interface (Centronics).
Size: 250(H)×37.5(W)×113.5(D)mm.
Weight: 0.60kg.

Mitsubishi Positioning Module AD71-S1
Model: AD71-S1.
Control axes: 2 axes.
Number Of I/O Points: 32 Points.
Modes: Positioning Control Mode.
Size: 250 * 37.5 * 121 MM
Weight: 0.63KG.

Mitsubishi Serial Communications modules AJ71QC24-R2
Model: AJ71QC24-R2.
RS-232 2 channel.
Transmission speed: 0.3 ~ 19.2kbps.
Size: 250(H)×37.5(W)×113.5(D)mm.
Weight: 0.37kg.

Mitsubishi High-speed Counter module AD61
Model: AD61.
2-channel.
50kpps.
Count input signal: DC5/12/24V.
External Input: DC5/12/24V.
Coincidence output: transistor output (open collector), DC12/24V, 0.5A.
38-point terminal block.
Size: 250(H)×37.5(W)×131(D)mm.
Weight: 0.50kg.

Mitsubishi Transistor Output module AY60
Model: AY60.
Transistor outputs: 16 points.DC24V(12/48V), 2A / 1 Point, 5A / 1 common.
Response time: 2ms.
8 points per common.
Sinking.
20-point terminal block.
Size: 250(H)×37.5(W)×121(D)mm.
Weight: 0.64kg.

Mitsubishi Inverter FR-A740-450K
Product Name: Inverter.
Model: FR-A740-450K.
450 KW.
Rated voltage: Three-phase 380 to 500 V.
Applicable motor capacity: 450 kW.
Permissible AC voltage fluctuation: 323 to 528V 50Hz/60Hz.
Power supply capacity: 660 kVA
Cooling system: Forced air cooling.
Approx. mass: 370 Kg.

ABB Inverter ACS550-01-087A-4
Product Name: Inverter.
Model: ACS550-01-087A-4.
Frame size: R4.
Wall-mounted units.
Typical motor power in 400 V at normal use: 45kw.
Typical motor power in 460 V at normal use: 60hp.
Continuous rms current. 10% overload is allowed for one minute in ten minutes: 87A.
Typical motor power in 400 V at heavy-duty use: 37KW.
Typical motor power in 460 V at heavy-duty use: 60HP.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 72A.
3-phase supply voltage 380 to 480 V.

ABB Inverter ACS800-01-0020-2
Product Name: Inverter.
Model: ACS800-01-0020-2.
Frame size: R4.
Rated current available continuously without overloadability at 40 °C: 55A
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 72A.
Typical motor power in no-overload use: 15KW
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 50A.
Typical motor power in light-overload use: 15Kw.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 37A.
Typical motor power in heavy-duty use: 7.5KW.
UN = 230 V (Range 208 to 240 V). The power ratings are valid at nominal voltage 230 V.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.

Mennekes Receptacle 3767
Product Name:Receptacles
Part No.:3767.
Ampere:16A.
Poles:3p.
Voltage:230V.
Earth position:6h.
Hertz50-60 Hz.
Connection technology:screw terminals.
Contact:standard.
Protection type:IP67.
screw terminals.
highly resistant to chemicals
highly heat resistant contact carrier
nickel plated contacts
with 4 external fixings
one cable entry at top, one blind cable entry (can be cut out) at bottom

Mitsubishi External connection cable GT11H-C100-37P