Mitsubishi Encoder cable MR-ENCBL30M-H
Model: MR-ENCBL30M-H.
cable length: 30m.
for MR-J2S-700A (4)/CP/CL or smaller.
Encoder cable for HC-SFS; HC-LFS; HC-RFS; HC-UFS 2000r/min series; HA-LFS series motor.
-H products have a long bending life.
The encoder cable is not oil-r

Mitsubishi Encoder cable MR-ENCBL50M-H
Model: MR-ENCBL50M-H.
cable length: 50m.
for MR-J2S-700A (4)/CP/CL or smaller.
Encoder cable for HC-SFS; HC-LFS; HC-RFS; HC-UFS 2000r/min series; HA-LFS series motor.
-H products have a long bending life.
The encoder cable is not oil-r

Mitsubishi Encoder connector MR-J2CNM
Model: MR-J2CNM.
for MR-J2S-700A (4)/CP/CL or smaller.
Encoder connector set for HC-KFS; HC-MFS; HC-UFS 3000r/min series motor.

Mitsubishi Encoder connector MR-J2CNS
Model: MR-J2CNS.
for MR-J2S-700A (4)/CP/CL or smaller.
Encoder connector set for HC-SFS; HC-LFS; HC-RFS; HC-UFS 2000r/min series; HA-LFS series motor.

Mitsubishi Encoder connector MR-ENCNS
Model: MR-ENCNS.
for MR-J2S-700A (4)/CP/CL or smaller.
Encoder connector set for HC-SFS; HC-LFS; HC-RFS; HC-UFS 2000r/min series; HA-LFS series motor.
IP65;IP67.

Mitsubishi CN1 connector MR-J2CN1
Model: MR-J2CN1.
Use the MR-J2CN1 connector when the RS-422 communication cable is supplied by the customer.

Mitsubishi Junction terminal block cable MR-J2TBL05M
Model: MR-J2TBL05M.
cable length: 0.5m

Mitsubishi Junction terminal block cable MR-J2TBL1M
Model: MR-J2TBL1M.
cable length: 1m

Mitsubishi Personal computer communication cable MR-CPCATCBL3M
Model: MR-CPCATCBL3M.
Cable length: 3m.
for MR-J2S-30KA (4) or larger

Mitsubishi Personal computer communication cable MR-JRPCATCBL3M
Model: MR-JRPCATCBL3M.
Cable length: 3m.
(For MR-J2S-□CP(1)-S084).
for MR-J2S-11KA (4) to MR-J2S-22KA (4).

Mitsubishi Maintenance junction card cable MR-J2HBUS05M
Model: MR-J2HBUS05M.
cable length: 0.5M.
Amplifier to CC-Link interface unit cable.
for MR-J2S-11KA (4) to MR-J2S-22KA (4).
Use a 0.5m (1.64ft) or shorter cable between the amplifier and CC-Link interface unit.

Mitsubishi Maintenance junction card cable MR-J2HBUS1M
Model: MR-J2HBUS1M.
cable length: 1.0M.
Amplifier to CC-Link interface unit cable.
for MR-J2S-11KA (4) to MR-J2S-22KA (4).
Use a 0.5m (1.64ft) or shorter cable between the amplifier and CC-Link interface unit.