Mennekes Cepex wall mounted receptacle 4101
Product Name:Cepex wall mounted receptacle
Part No.:4101.
Ampere:16A.
Poles:3p.
Voltage:110V.
Earth position 4h.
Hertz 50-60Hz.
Protection type IP44.
screw terminals.
cable entry: 1 x M 25 with cable gland at top, 1 x M 25 to be cut out at the bottom, 1 x M 20 to be cut out at the back side, for cables 7 up to 13 mm ?.
meeting DIN 18032 standards for ball rebound.
Product Name:Cepex wall mounted receptacle
Part No.:4101.
Ampere:16A.
Poles:3p.
Voltage:110V.
Earth position 4h.
Hertz 50-60Hz.
Protection type IP44.
screw terminals.
cable entry: 1 x M 25 with cable gland at top, 1 x M 25 to be cut out at the bottom, 1 x M 20 to be cut out at the back side, for cables 7 up to 13 mm ?.
meeting DIN 18032 standards for ball rebound.
ABB Inverter ACS800-01-0020-3
Product Name: Inverter.
Model: ACS800-01-0020-3.
UN = 400 V (Range 380 to 415 V). The power ratings are valid at nominal voltage 400 V.
Rated current available continuously without overloadability at 40 °C: 34A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 46A.
Typical motor power in no-overload use: 15KW
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
Typical motor power in light-overload use: 15Kw.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 23A.
Typical motor power in heavy-duty use: 11KW.
Frame size: R3.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 31A.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
Product Name: Inverter.
Model: ACS800-01-0020-3.
UN = 400 V (Range 380 to 415 V). The power ratings are valid at nominal voltage 400 V.
Rated current available continuously without overloadability at 40 °C: 34A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 46A.
Typical motor power in no-overload use: 15KW
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
Typical motor power in light-overload use: 15Kw.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 23A.
Typical motor power in heavy-duty use: 11KW.
Frame size: R3.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 31A.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
Mennekes Name:Receptacle strip 95472
Product Name:Receptacle strip
Part No.:95472.
Fitted with:3 CEE 16A, 5p, 400V
Fusing:1 RCD 40A, 4p, 0.03A.
Connection/feeder cable:for 1 cable up to 5 x 10mm2.
Enclosure size:410 x 97 mm (H x W).
Protection type: IP44.
pre-wired for installation.
enclosure electric grey RAL 7035.
enclosure and insert made of AMAPLAST.
fusing behind a transparent cover.
hanging clip enclosed.
Product Name:Receptacle strip
Part No.:95472.
Fitted with:3 CEE 16A, 5p, 400V
Fusing:1 RCD 40A, 4p, 0.03A.
Connection/feeder cable:for 1 cable up to 5 x 10mm2.
Enclosure size:410 x 97 mm (H x W).
Protection type: IP44.
pre-wired for installation.
enclosure electric grey RAL 7035.
enclosure and insert made of AMAPLAST.
fusing behind a transparent cover.
hanging clip enclosed.
Mennekes Data module 41456
Product Name:Data module
Part No.41456. AMP, Type: Data port insert 2 x RJ45, cat.6, (type AMP Twist Dual/Outlet).
suitable for Cepex receptacles, part no. 4350 and versions.
Product Name:Data module
Part No.41456. AMP, Type: Data port insert 2 x RJ45, cat.6, (type AMP Twist Dual/Outlet).
suitable for Cepex receptacles, part no. 4350 and versions.
Mennekes Cepex wall mounted receptacle 4102
Product Name:Cepex wall mounted receptacle
Part No.:4102.
Ampere:16A.
Poles:3p.
Voltage:230V.
Earth position 6h.
Hertz 50-60Hz.
Protection type IP44.
screw terminals.
cable entry: 1 x M 25 with cable gland at top, 1 x M 25 to be cut out at the bottom, 1 x M 20 to be cut out at the back side, for cables 7 up to 13 mm ?.
meeting DIN 18032 standards for ball rebound.
Product Name:Cepex wall mounted receptacle
Part No.:4102.
Ampere:16A.
Poles:3p.
Voltage:230V.
Earth position 6h.
Hertz 50-60Hz.
Protection type IP44.
screw terminals.
cable entry: 1 x M 25 with cable gland at top, 1 x M 25 to be cut out at the bottom, 1 x M 20 to be cut out at the back side, for cables 7 up to 13 mm ?.
meeting DIN 18032 standards for ball rebound.
Mennekes Cepex wall mounted receptacle 4135
PProduct Name:Cepex wall mounted receptacle
Part No.:4135.
Ampere:16A.
Poles:5p.
Voltage:400V.
Earth position: 6h.
Hertz 50-60Hz.
Protection type IP44.
screw terminals.
with labelling field.
cable entry: 1 x M 25 with cable gland at top, 1 x M 25 to be cut out at the bottom, 1 x M 20 to be cut out at the back side, for cables 7 up to 13 mm ?.
PProduct Name:Cepex wall mounted receptacle
Part No.:4135.
Ampere:16A.
Poles:5p.
Voltage:400V.
Earth position: 6h.
Hertz 50-60Hz.
Protection type IP44.
screw terminals.
with labelling field.
cable entry: 1 x M 25 with cable gland at top, 1 x M 25 to be cut out at the bottom, 1 x M 20 to be cut out at the back side, for cables 7 up to 13 mm ?.
392 Results 12/Page Page 9 of 33 [First Page] << Previous 5 6 7 8 9 10 11 12 13 14 Next >> [Last Page]