Mennekes Panel mounted receptacle 23971
Product Name:Panel mounted receptacle
Part No.23971.
Ampere :63A.
Poles:2P.
Voltage:20-25，40-50V.
Hertz:(DC) Hz.
Earth position:10 h.
Connection technology:Screw terminals.
Contact:nickel plated contacts, highly heat resistant contact carrier.
Protection type:IP44.
screw terminals.
system 2 (63A is not standardized).
highly heat resistant contact carrier.
nickel plated contacts.
25° inclination.
Product Name:Panel mounted receptacle
Part No.23971.
Ampere :63A.
Poles:2P.
Voltage:20-25，40-50V.
Hertz:(DC) Hz.
Earth position:10 h.
Connection technology:Screw terminals.
Contact:nickel plated contacts, highly heat resistant contact carrier.
Protection type:IP44.
screw terminals.
system 2 (63A is not standardized).
highly heat resistant contact carrier.
nickel plated contacts.
25° inclination.
Mennekes Plug CEEplus 978
Product Name:Plug CEEplus
Part No.978.
Ampere :16A.
Poles：5 p + additional contacts.
Voltage:400V.
Earth position:6 h.
Hertz:50-60 Hz.
Connection technology:Screw terminals.
Contact:standard.
Protection type:IP44.
screw terminals.
with 4 additional contacts.
cable gland and sealing.
strain relief and protection against kinking.
enclosure with thread lock and safety slide.
Product Name:Plug CEEplus
Part No.978.
Ampere :16A.
Poles：5 p + additional contacts.
Voltage:400V.
Earth position:6 h.
Hertz:50-60 Hz.
Connection technology:Screw terminals.
Contact:standard.
Protection type:IP44.
screw terminals.
with 4 additional contacts.
cable gland and sealing.
strain relief and protection against kinking.
enclosure with thread lock and safety slide.
Mennekes Wall mounted inlet 1975
Product Name:Wall mounted inlet
Part No.1975.
Ampere :32A.
Poles:3P.
Voltage:20-25V.
Hertz:50-60 Hz.
Earth position:0 h.
Connection technology:Screw terminals.
Contact:standard.
Protection type:IP44.
screw terminals.
external fixing.
one cable entry at top and one blind cable entry (can be cut out) at the back side.
Product Name:Wall mounted inlet
Part No.1975.
Ampere :32A.
Poles:3P.
Voltage:20-25V.
Hertz:50-60 Hz.
Earth position:0 h.
Connection technology:Screw terminals.
Contact:standard.
Protection type:IP44.
screw terminals.
external fixing.
one cable entry at top and one blind cable entry (can be cut out) at the back side.
Mennekes Cepex flush mounted receptacle SCHUKO 4979
Product Name:Cepex panel mounted receptacle SCHUKO?
Part No.:4979.
Ampere :16A.
Poles:2p.
Voltage:230V.
Earth position:0h.
Hertz:50-60 Hz.
Shutter:no.
Protection type:IP44.
alpine white or pearl white.
screw terminals.
suitable for installation in cable ducts and columns.
meeting DIN 18032 standards for ball rebound.
Product Name:Cepex panel mounted receptacle SCHUKO?
Part No.:4979.
Ampere :16A.
Poles:2p.
Voltage:230V.
Earth position:0h.
Hertz:50-60 Hz.
Shutter:no.
Protection type:IP44.
alpine white or pearl white.
screw terminals.
suitable for installation in cable ducts and columns.
meeting DIN 18032 standards for ball rebound.
Mennekes Cepex flush mounted receptacle SCHUKO 4971
Product Name:Cepex panel mounted receptacle SCHUKO?
Part No.:4971.
Ampere :16A.
Poles:2p.
Voltage:230V.
Earth position:0h.
Hertz:50-60 Hz.
Shutter:no.
Protection type:IP44.
alpine white or pearl white.
screw terminals.
suitable for installation in cable ducts and columns.
meeting DIN 18032 standards for ball rebound.
Product Name:Cepex panel mounted receptacle SCHUKO?
Part No.:4971.
Ampere :16A.
Poles:2p.
Voltage:230V.
Earth position:0h.
Hertz:50-60 Hz.
Shutter:no.
Protection type:IP44.
alpine white or pearl white.
screw terminals.
suitable for installation in cable ducts and columns.
meeting DIN 18032 standards for ball rebound.
ABB Inverter ACS800-01-0120-7
Product Name: Inverter.
Model: ACS800-01-0120-7.
UN = 690 V (Range 525 to 690 V). The power ratings are valid at nominal voltage 690 V.
Rated current available continuously without overloadability at 40 °C: 113A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 172A.
Typical motor power in no-overload use: 110KW
Frame size: R6.
Typical motor power in light-overload use: 90Kw.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 86A.
Typical motor power in heavy-duty use: 75KW.
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 108A.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
Product Name: Inverter.
Model: ACS800-01-0120-7.
UN = 690 V (Range 525 to 690 V). The power ratings are valid at nominal voltage 690 V.
Rated current available continuously without overloadability at 40 °C: 113A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 172A.
Typical motor power in no-overload use: 110KW
Frame size: R6.
Typical motor power in light-overload use: 90Kw.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 86A.
Typical motor power in heavy-duty use: 75KW.
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 108A.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
ABB Inverter ACS800-01-0175-7
Product Name: Inverter.
Model: ACS800-01-0175-7.
UN = 690 V (Range 525 to 690 V). The power ratings are valid at nominal voltage 690 V.
Rated current available continuously without overloadability at 40 °C: 166A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 245A.
Typical motor power in no-overload use: 160KW
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 155A.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 131A.
Typical motor power in heavy-duty use: 110KW.
Typical motor power in light-overload use: 132Kw.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
Frame size: R6.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
Product Name: Inverter.
Model: ACS800-01-0175-7.
UN = 690 V (Range 525 to 690 V). The power ratings are valid at nominal voltage 690 V.
Rated current available continuously without overloadability at 40 °C: 166A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 245A.
Typical motor power in no-overload use: 160KW
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 155A.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 131A.
Typical motor power in heavy-duty use: 110KW.
Typical motor power in light-overload use: 132Kw.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
Frame size: R6.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
Mennekes Receptacle combination 97990
Product Name:Receptacle combination
Part No.:97990.
Ampere:16A.
Poles:5p.
Voltage:400V.
Earth position :6h.
Hertz50-60 Hz.
Protection type:IP44.
screw terminals.
CEE and receptacle SCHUKO? in one enclosure.
fitted with Neozed D01, 1p.
Product Name:Receptacle combination
Part No.:97990.
Ampere:16A.
Poles:5p.
Voltage:400V.
Earth position :6h.
Hertz50-60 Hz.
Protection type:IP44.
screw terminals.
CEE and receptacle SCHUKO? in one enclosure.
fitted with Neozed D01, 1p.
Mennekes Connector PowerTOP 3970
Product Name:Connector PowerTOP?
Part No.:3970.
Ampere:32A.
Poles:4p
Voltage:400V.
Earth position:6h.
Hertz 50-60Hz.
Connection technology:screw terminals.
Contact:highly heat resistant contact carrier.
Protection type IP44.
screw terminals.
with highly heat resistant contact carrier.
cable gland and external cable grip.
Product Name:Connector PowerTOP?
Part No.:3970.
Ampere:32A.
Poles:4p
Voltage:400V.
Earth position:6h.
Hertz 50-60Hz.
Connection technology:screw terminals.
Contact:highly heat resistant contact carrier.
Protection type IP44.
screw terminals.
with highly heat resistant contact carrier.
cable gland and external cable grip.
Mennekes Connector PowerTOP 3974
Product Name:Connector PowerTOP?
Part No.:3974.
Ampere:32A.
Poles:5p
Voltage:110V.
Earth position:4h.
Hertz 50-60Hz.
Connection technology:screw terminals.
Contact:highly heat resistant contact carrier.
Protection type IP44.
screw terminals.
with highly heat resistant contact carrier.
cable gland and external cable grip.
Product Name:Connector PowerTOP?
Part No.:3974.
Ampere:32A.
Poles:5p
Voltage:110V.
Earth position:4h.
Hertz 50-60Hz.
Connection technology:screw terminals.
Contact:highly heat resistant contact carrier.
Protection type IP44.
screw terminals.
with highly heat resistant contact carrier.
cable gland and external cable grip.
ABB Inverter ACS800-01-0006-2
Product Name: Inverter.
Model: ACS800-01-0006-2.
UN = 230 V (Range 208 to 240 V). The power ratings are valid at nominal voltage 230 V.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 24A.
Typical motor power in no-overload use: 4KW
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 18A.
Typical motor power in light-overload use: 4Kw.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 14A.
Typical motor power in heavy-duty use: 3KW.
Frame size: R3.
Rated current available continuously without overloadability at 40 °C: 19A
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
Product Name: Inverter.
Model: ACS800-01-0006-2.
UN = 230 V (Range 208 to 240 V). The power ratings are valid at nominal voltage 230 V.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 24A.
Typical motor power in no-overload use: 4KW
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 18A.
Typical motor power in light-overload use: 4Kw.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 14A.
Typical motor power in heavy-duty use: 3KW.
Frame size: R3.
Rated current available continuously without overloadability at 40 °C: 19A
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.