Home >> Products >> 97
Proface HMI(Premium Display) PFXSP5700TPD
Product Name: HMI.
Model: PFXSP5700TPD.
Display Type and Size: 15inch TFT Color LCD.
Ethernet: Wirelesss.
Power Consumption: 57W max.
Display Area: W304.1 x H228.1mm[W11.97 x H8.98].
Display Colors: 16 million colors.
Input Voltage: 12 to 24 Vdc.
Graphic Display Resolution: 1, 024 x 768 pixels (XGA) .
Mitsubishi Extension base A55B
Model: A55B.
5 slots.
Can not install the power supply unit.
Wearable QnA / A Series unit.
Size: 250(H)×297(W)×29(D)mm.
Weight: 1.2kg.
Mitsubishi Temperature input Module A1S62RD3N
Product: Temperature input Module.
Model: A1S62RD3N.
Outline: 2 channels, 3-wire type platinum RTD (Pt100 [JIS C1604-1997, IEC 751-am2, JIS C1604-1989, DIN 43760-1980], JPt100 [JIS C1604-1981]), conversion speed: 40 ms/channel, 20-point terminal block.
ABB Inverter ACS800-01-0020-5
Product Name: Inverter.
Model: ACS800-01-0020-5.
UN = 500 V (Range 380 to 500 V). The power ratings are valid at nominal voltage 500 V.
Rated current available continuously without overloadability at 40 °C: 25A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 32A.
Typical motor power in no-overload use: 15KW
Frame size: R3.
Typical motor power in light-overload use: 15Kw.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 18A.
Typical motor power in heavy-duty use: 11KW.
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 23A.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
ABB Inverter ACS800-01-0165-5
Product Name: Inverter.
Model: ACS800-01-0165-5.
UN = 500 V (Range 380 to 500 V). The power ratings are valid at nominal voltage 500 V.
Rated current available continuously without overloadability at 40 °C: 225A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 326A.
Typical motor power in no-overload use: 132KW
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 220A.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 163A.
Typical motor power in heavy-duty use: 110KW.
Frame size: R6.
Typical motor power in light-overload use: 132Kw.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
Mennekes Name:Receptacle strip 96438
Product Name:Receptacle strip
Part No.:96438.
Fitted with:1 CEE 16A, 5p, 400V.
2 SCHUKO? 16A, 230V.
Connection/feeder cable:for 1 cable up to 5 x 10mm2.
Enclosure size:410 x 97 mm (H x W).
Protection type: IP44.
pre-wired for installation.
enclosure grey RAL 7035.
enclosure and insert made of AMAPLAST.
hanging clip enclosed.
Mennekes AMAXX receptacle combination 970003
Product Name:AMAXX? receptacle combination
Part No.:970003.
Fitted with:1 CEE 32A, 5p, 400V
1 CEE 16A, 5p, 400V
4 SCHUKO? 16A, 230V.
Fusing:1 MCB 32A, 3p, C
1 MCB 16A, 3p, C
4 MCB′s 16A, 1p, C.
Pre-fuse max:63A.
InA:63A.
RDF:0.85.
Connection/feeder cable:for 1 cable up to 5 x 10 mm2Enclosure size:260 x 225 mm (H x W).
Protection type IP44.
pre-wired for installation.
hinged to the side.
enclosure and insert made of AMAPLAST.
fusing behind a transparent cover.
with suspension eyes on top, grip hooks on the bottom and chain set provided.
Mennekes Wall mounted phase inverter inlet 20970
Product Name:Panel mounted phase inverter inlet
Part No.:20970.
Ampere:16A.
Poles:5p
Voltage:400V.
Earth position:6h.
Hertz 50-60Hz.
Connection technology:screw terminals.
Contact:standard.
Protection type IP44.
screw terminals.
with hinged lid.
ABB Inverter ACS800-01-0255-5
Product Name: Inverter.
Model: ACS800-01-0255-5.
UN = 500 V (Range 380 to 500 V). The power ratings are valid at nominal voltage 500 V.
Rated current available continuously without overloadability at 40 °C: 290A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 351A.
Typical motor power in no-overload use: 200KW
Frame size: R6.
Typical motor power in light-overload use: 200Kw.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 234A.
Typical motor power in heavy-duty use: 160KW.
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 285A.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
Mennekes Wall mounted receptacle 1197
Product Name:Wall mounted receptacle.
Part No.:1197.
Ampere:16A.
Poles:4p.
Voltage:500V.
Earth position:7h.
Hertz:50-60 Hz.
Connection technology:screw terminals.
Contact:standard.
Protection type:IP67.
screw terminals.
four external fixing holes.
one cable entry at top and one blind cable entry (can be cut out) at bottom.
receptacles are designed for adding an auxiliary contact switch.
143 Results 12/Page Page 1 of 12    1 2 3 4 5 6 7 8 9 10 Next >> [Last Page]