Mennekes Name:Receptacle strip 95472
Product Name:Receptacle strip
Part No.:95472.
Fitted with:3 CEE 16A, 5p, 400V
Fusing:1 RCD 40A, 4p, 0.03A.
Connection/feeder cable:for 1 cable up to 5 x 10mm2.
Enclosure size:410 x 97 mm (H x W).
Protection type: IP44.
pre-wired for installation.
enclosure electric grey RAL 7035.
enclosure and insert made of AMAPLAST.
fusing behind a transparent cover.
hanging clip enclosed.
Product Name:Receptacle strip
Part No.:95472.
Fitted with:3 CEE 16A, 5p, 400V
Fusing:1 RCD 40A, 4p, 0.03A.
Connection/feeder cable:for 1 cable up to 5 x 10mm2.
Enclosure size:410 x 97 mm (H x W).
Protection type: IP44.
pre-wired for installation.
enclosure electric grey RAL 7035.
enclosure and insert made of AMAPLAST.
fusing behind a transparent cover.
hanging clip enclosed.
Mennekes Receptacle 1872
Product Name:Wall mounted receptacle with TwinCONTACT
Part No.:1872.
Ampere:16A.
Poles:4p.
Voltage:500V.
Earth position:7h.
Hertz:50-60 Hz.
Connection technology:Screwless - TwinCONTACT.
Contact:standard.
Protection type:IP67.
screwless spring terminals.
suitable for through wiring.
with 4 external fixing points.
one cable entry at top and one blind entry (can be cut out) at bottom.
receptacles are designed for adding an auxiliary contact switch..
Product Name:Wall mounted receptacle with TwinCONTACT
Part No.:1872.
Ampere:16A.
Poles:4p.
Voltage:500V.
Earth position:7h.
Hertz:50-60 Hz.
Connection technology:Screwless - TwinCONTACT.
Contact:standard.
Protection type:IP67.
screwless spring terminals.
suitable for through wiring.
with 4 external fixing points.
one cable entry at top and one blind entry (can be cut out) at bottom.
receptacles are designed for adding an auxiliary contact switch..
Mennekes Inlet 75172
Product Name:Inlet
Part No.75172.
Ampere :250A.
Poles：4P.
Voltage:400V.
Earth position:6 h.
Hertz:50-60 Hz.
Connection technology:Screw terminals.
Contact:standard.
Protection type:IP67.
screw terminals.
with cable gland.
seawater resistant products are available on request.
Product Name:Inlet
Part No.75172.
Ampere :250A.
Poles：4P.
Voltage:400V.
Earth position:6 h.
Hertz:50-60 Hz.
Connection technology:Screw terminals.
Contact:standard.
Protection type:IP67.
screw terminals.
with cable gland.
seawater resistant products are available on request.
ABB Inverter ACS550-01-087A-4
Product Name: Inverter.
Model: ACS550-01-087A-4.
Frame size: R4.
Wall-mounted units.
Typical motor power in 400 V at normal use: 45kw.
Typical motor power in 460 V at normal use: 60hp.
Continuous rms current. 10% overload is allowed for one minute in ten minutes: 87A.
Typical motor power in 400 V at heavy-duty use: 37KW.
Typical motor power in 460 V at heavy-duty use: 60HP.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 72A.
3-phase supply voltage 380 to 480 V.
Product Name: Inverter.
Model: ACS550-01-087A-4.
Frame size: R4.
Wall-mounted units.
Typical motor power in 400 V at normal use: 45kw.
Typical motor power in 460 V at normal use: 60hp.
Continuous rms current. 10% overload is allowed for one minute in ten minutes: 87A.
Typical motor power in 400 V at heavy-duty use: 37KW.
Typical motor power in 460 V at heavy-duty use: 60HP.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 72A.
3-phase supply voltage 380 to 480 V.
ABB Inverter ACS800-01-0020-2
Product Name: Inverter.
Model: ACS800-01-0020-2.
Frame size: R4.
Rated current available continuously without overloadability at 40 °C: 55A
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 72A.
Typical motor power in no-overload use: 15KW
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 50A.
Typical motor power in light-overload use: 15Kw.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 37A.
Typical motor power in heavy-duty use: 7.5KW.
UN = 230 V (Range 208 to 240 V). The power ratings are valid at nominal voltage 230 V.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
Product Name: Inverter.
Model: ACS800-01-0020-2.
Frame size: R4.
Rated current available continuously without overloadability at 40 °C: 55A
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 72A.
Typical motor power in no-overload use: 15KW
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 50A.
Typical motor power in light-overload use: 15Kw.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 37A.
Typical motor power in heavy-duty use: 7.5KW.
UN = 230 V (Range 208 to 240 V). The power ratings are valid at nominal voltage 230 V.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
Mitsubishi Inverter FR-A720-0.75K
Product Name: Inverter.
Model: FR-A720-0.75K.
0.75KW.
Rated voltage: Three-phase 200 to 240V.
Applicable motor capacity: 0.75 kW.
Permissible AC voltage fluctuation: 170 to 242V 50Hz, 170 to 264V 60Hz.
Power supply capacity: 2.5 kVA
Cooling system: Self-cooling.
Approx. mass: 2.3 Kg.
Product Name: Inverter.
Model: FR-A720-0.75K.
0.75KW.
Rated voltage: Three-phase 200 to 240V.
Applicable motor capacity: 0.75 kW.
Permissible AC voltage fluctuation: 170 to 242V 50Hz, 170 to 264V 60Hz.
Power supply capacity: 2.5 kVA
Cooling system: Self-cooling.
Approx. mass: 2.3 Kg.
254 Results 12/Page Page 8 of 22 [First Page] << Previous 4 5 6 7 8 9 10 11 12 13 Next >> [Last Page]