Mitsubishi Transistor Output module AY41
Model: AY41.
Transistor outputs: 32 points.DC12/24V, 0.1A / 1 Point, 1.6A / 1 common.
Response time: 2ms.
16 points per common.
Sinking.
38-point terminal block.
Size: 250(H)×37.5(W)×131(D)mm.
Weight: 0.44kg.
Model: AY41.
Transistor outputs: 32 points.DC12/24V, 0.1A / 1 Point, 1.6A / 1 common.
Response time: 2ms.
16 points per common.
Sinking.
38-point terminal block.
Size: 250(H)×37.5(W)×131(D)mm.
Weight: 0.44kg.
Mitsubishi Temperature - Digital Conversion Unit A68RD3N
Model: A68RD3N.
8-channel
Wire platinum RTD 3 (Pt100 (JIS C1604-1989, DIN 43760-1980), JPt100 (JIS C1604-1981)).
Conversion rate: 40ms / 1 Channel
38-point terminal block.
Size: 250(H)×37.5(W)×131(D)mm.
Weight: 0.62kg.
Model: A68RD3N.
8-channel
Wire platinum RTD 3 (Pt100 (JIS C1604-1989, DIN 43760-1980), JPt100 (JIS C1604-1981)).
Conversion rate: 40ms / 1 Channel
38-point terminal block.
Size: 250(H)×37.5(W)×131(D)mm.
Weight: 0.62kg.
Mitsubishi Inverter FR-A840-02600-2-60
Product Name: Inverter.
Model: FR-A840-02600-2-60.
90KW.
Rated voltage: Three-phase 380 to 500 V.
Applicable motor capacity(SLD): 132 kW.
Rated input AC voltage/frequency: Three-phase 380 to 500 V 50 Hz/60 Hz.
Cooling system: Forced air cooling.
Approx. mass: 55 Kg.
Product Name: Inverter.
Model: FR-A840-02600-2-60.
90KW.
Rated voltage: Three-phase 380 to 500 V.
Applicable motor capacity(SLD): 132 kW.
Rated input AC voltage/frequency: Three-phase 380 to 500 V 50 Hz/60 Hz.
Cooling system: Forced air cooling.
Approx. mass: 55 Kg.
ABB Inverter ACS800-01-0165-5
Product Name: Inverter.
Model: ACS800-01-0165-5.
UN = 500 V (Range 380 to 500 V). The power ratings are valid at nominal voltage 500 V.
Rated current available continuously without overloadability at 40 °C: 225A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 326A.
Typical motor power in no-overload use: 132KW
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 220A.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 163A.
Typical motor power in heavy-duty use: 110KW.
Frame size: R6.
Typical motor power in light-overload use: 132Kw.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
Product Name: Inverter.
Model: ACS800-01-0165-5.
UN = 500 V (Range 380 to 500 V). The power ratings are valid at nominal voltage 500 V.
Rated current available continuously without overloadability at 40 °C: 225A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 326A.
Typical motor power in no-overload use: 132KW
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 220A.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 163A.
Typical motor power in heavy-duty use: 110KW.
Frame size: R6.
Typical motor power in light-overload use: 132Kw.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
ABB Inverter ACS550-01-03A3-4
Product Name: Inverter.
Model: ACS550-01-03A3-4.
3-phase supply voltage 380 to 480 V.
Wall-mounted units.
Frame size: R1.
Typical motor power in 460 V at normal use: 1.5hp.
Continuous rms current. 10% overload is allowed for one minute in ten minutes: 3.3A.
Typical motor power in 400 V at heavy-duty use: 0.75KW.
Typical motor power in 460 V at heavy-duty use: 1HP.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 2.4A.
Typical motor power in 400 V at normal use: 1.1kw.
Product Name: Inverter.
Model: ACS550-01-03A3-4.
3-phase supply voltage 380 to 480 V.
Wall-mounted units.
Frame size: R1.
Typical motor power in 460 V at normal use: 1.5hp.
Continuous rms current. 10% overload is allowed for one minute in ten minutes: 3.3A.
Typical motor power in 400 V at heavy-duty use: 0.75KW.
Typical motor power in 460 V at heavy-duty use: 1HP.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 2.4A.
Typical motor power in 400 V at normal use: 1.1kw.
Mitsubishi Transistor Output module AY81
Model: AY81.
Transistor outputs: 32 points.DC12/24V, 0.5A/1 Point, 4A/1 common.
Response time: 2ms.
source type
30-point terminal block.
Size: 250(H)×37.5(W)×106(D)mm.
Weight: 0.47kg.
Model: AY81.
Transistor outputs: 32 points.DC12/24V, 0.5A/1 Point, 4A/1 common.
Response time: 2ms.
source type
30-point terminal block.
Size: 250(H)×37.5(W)×106(D)mm.
Weight: 0.47kg.
OMRON Fuzzy Support Software C500-SU981-E
Available on either 3.5” or 5.25” floppy disks.
Available on either 3.5” or 5.25” floppy disks.
OMRON I/O Interface Unit CV500-II201
I/O Interface Unit
I/O Interface Unit
Mitsubishi Inverter FR-E740-0.4K
Product Name: Inverter.
Model: FR-E740-0.4K.
0.4 KW.
Rated voltage: Three-phase 380 to 480V.
Applicable motor capacity: 0.4 kW.
Rated input AC (DC) voltage/frequency: Three-phase 380 to 480V 50Hz/60Hz (283 to 339VDC).
Protective structure: Enclosed type (IP20). IP40 for totally enclosed structure series.
Cooling system: Self-cooling.
Approx. mass: 1.4 Kg.
Product Name: Inverter.
Model: FR-E740-0.4K.
0.4 KW.
Rated voltage: Three-phase 380 to 480V.
Applicable motor capacity: 0.4 kW.
Rated input AC (DC) voltage/frequency: Three-phase 380 to 480V 50Hz/60Hz (283 to 339VDC).
Protective structure: Enclosed type (IP20). IP40 for totally enclosed structure series.
Cooling system: Self-cooling.
Approx. mass: 1.4 Kg.
3223 Results 12/Page Page 34 of 269 [First Page] << Previous 30 31 32 33 34 35 36 37 38 39 Next >> [Last Page]