Mitsubishi DC input module AX81-S2
Model: AX81-S2.
Input DC: 32 points DC48/60V　3/4mA.
Response time: 20ms.
8 points per common.
Negative common type.
38-point terminal block.
Size: 250(H)×37.5(W)×131(D)mm.
Weight: 0.45kg.

Mitsubishi Triac Output module AY23
Model: AY23.
Triac outputs: 32 points.AC100 ~ 240V, 0.6A / 1 Point, 2.4A / 1 common.
Response time: 1ms +0.5 cycles.
8 points per common.
38-point terminal block.
Size: 250(H)×37.5(W)×131(D)mm.
Weight: 0.55kg.

Mitsubishi Transistor Output module AY60S
Model: AY60S.
Transistor outputs: 16 points.DC24/48V, 2A/1 Point, 6.4A/1 common.
Response time: 2ms.
8 points per common.
sink type
20-point terminal block.
Size: 250(H)×37.5(W)×121(D)mm.
Weight: 0.66kg.

Mitsubishi Transistor Output module AY81EP
Model: AY81EP.
Transistor outputs: 32 points.DC12/24V, 0.8A/1 Point
Response time: 1.5ms.
16 points per common
source type
38-point terminal block.
Size: 250(H)×37.5(W)×131(D)mm.
Weight: 0.72kg.

Mitsubishi Input/Output module A42XY
Model: A42XY.
Dynamic Input: 64 points.More DC7V.
Response time: 16ms, 16-pin connector.
Dynamic Output: 64 points, point 50mA / 1.
Response time: 16ms, 32-pin connector.
Size: 250(H)×37.5(W)×119(D)mm.
Weight: 0.60kg.

Mitsubishi Positioning Module AD71-S7
Model: AD71-S7.
Control axes: 2 axes.
Speed/positioning control switching mode
Speed control mode
Select using parameters.(Same mode is applied to the X and Y axes.).
Size: 250 * 37.5 * 121 MM
Weight: 0.63KG.

Mennekes Plug SCHUKO 10837
Product Name:Plug SCHUKO?
Part No.:10837.
Ampere :16A.
Poles:2p+E.
Voltage:230V.
Shutter:no.
Connection technology:Screw terminals.
Contact:standard.
Protection type:IP44.
screw terminals.
with combined PE-conductor acc. to german and french-belgian standard.
with grommet.
for cables up to 3 x 2.5 mm2, up to H07RN-F.

Mennekes Plug AM-TOP 3777
Product Name:Plug AM-TOP?
Part No.3777.
Ampere :16A.
Poles:7P.
Voltage:400V.
Earth position:6h.
Hertz:50-60 Hz.
Connection technology:Screw terminals.
Contact:nickel plated contacts, highly heat resistant contact carrier.
Protection type:IP67.
screw terminals.
highly heat resistant contact carrier.
nickel plated contacts.
single part body.
cable gland and sealing.
strain relief and protection against kinking.

Mennekes Connector AM-TOP 3783
Product Name:Connector AM-TOP?
Part No.3783.
Ampere :16A.
Poles:7P.
Voltage:230V.
Earth position:9h.
Hertz:50-60 Hz.
Connection technology:Screw terminals.
Contact:nickel plated contacts, highly heat resistant contact carrier.
Protection type:IP67.
screw terminals.
with highly heat resistant contact carrier.
nickel plated contacts.
single part body.
cable gland and sealing.
strain relief and protection against kinking.

Mennekes Connector AM-TOP 3784
Product Name:Connector AM-TOP?
Part No.3784.
Ampere :16A.
Poles:7P.
Voltage:500V.
Earth position:7h.
Hertz:50-60 Hz.
Connection technology:Screw terminals.
Contact:nickel plated contacts, highly heat resistant contact carrier.
Protection type:IP67.
screw terminals.
with highly heat resistant contact carrier.
nickel plated contacts.
single part body.
cable gland and sealing.
strain relief and protection against kinking.

Mennekes Panel mounted receptacle 23767
Product Name:Panel mounted receptacle
Part No.23767.
Ampere :63A.
Poles:2P.
Voltage:40-50V.
Hertz:50-60 Hz.
Earth position:12 h.
Connection technology:Screw terminals.
Contact:nickel plated contacts, highly heat resistant contact carrier.
Protection type:IP44.
with highly heat resistant contact carrier.
nickel plated contacts.
internal fixing.
one cable entry at top and two blind cable entries (can be cut out) at bottom.
enclosure base can be turned 180°.
63A is not standardized.

Mennekes Panel mounted receptacle 23768
Product Name:Panel mounted receptacle
Part No.23768.
Ampere :63A.
Poles:3P.
Voltage:40-50V.
Hertz:50-60 Hz.
Earth position:12 h.
Connection technology:Screw terminals.
Contact:nickel plated contacts, highly heat resistant contact carrier.
Protection type:IP44.
with highly heat resistant contact carrier.
nickel plated contacts.
internal fixing.
one cable entry at top and two blind cable entries (can be cut out) at bottom.
enclosure base can be turned 180°.
63A is not standardized.