Mitsubishi Transistor Output module AY51
Model: AY51.
Transistor outputs: 32 points.DC12/24V, 0.5A / 1 Point, 4A / 1 common.
Response time: 2ms.
16 points per common.
Sinking.
38-point terminal block.
Size: 250(H)×37.5(W)×131(D)mm.
Weight: 0.53kg.
Model: AY51.
Transistor outputs: 32 points.DC12/24V, 0.5A / 1 Point, 4A / 1 common.
Response time: 2ms.
16 points per common.
Sinking.
38-point terminal block.
Size: 250(H)×37.5(W)×131(D)mm.
Weight: 0.53kg.
Mitsubishi Transistor Output module AY42-S3
Model: AY42-S3.
Transistor outputs: 64 points.DC12/24V, 0.1A / 1 Point, 2A / 1 common.
Response time: 2ms.
32 points per common.
Sinking.
40-pin connector × 2.
Size: 250(H)×37.5(W)×101(D)mm.
Weight: 0.50kg.
Model: AY42-S3.
Transistor outputs: 64 points.DC12/24V, 0.1A / 1 Point, 2A / 1 common.
Response time: 2ms.
32 points per common.
Sinking.
40-pin connector × 2.
Size: 250(H)×37.5(W)×101(D)mm.
Weight: 0.50kg.
Mitsubishi Transistor Output module AY41P
Model: AY41P.
Transistor outputs: 32 points.DC12/24V, 0.1A / 1 Point, 1.0A / 1 common.
Response time: 2ms.
16 points per common.
Sinking.
38-point terminal block.
Size: 250(H)×37.5(W)×131(D)mm.
Weight: 0.44kg.
Model: AY41P.
Transistor outputs: 32 points.DC12/24V, 0.1A / 1 Point, 1.0A / 1 common.
Response time: 2ms.
16 points per common.
Sinking.
38-point terminal block.
Size: 250(H)×37.5(W)×131(D)mm.
Weight: 0.44kg.
Mitsubishi Transistor Output module AY82EP
Model: AY82EP.
Transistor outputs: 64 points.DC12/24V, 0.1A/1 Point
Response time: 1.5ms.
32 points per common
source type
40-point terminal block.
Size: 250(H)×37.5(W)×131(D)mm.
Weight: 0.58kg.
Model: AY82EP.
Transistor outputs: 64 points.DC12/24V, 0.1A/1 Point
Response time: 1.5ms.
32 points per common
source type
40-point terminal block.
Size: 250(H)×37.5(W)×131(D)mm.
Weight: 0.58kg.
Mitsubishi MELSECNET/10 network modules AJ71LP21G
Model: AJ71LP21G.
MELSECNET/10.
PC to PC Network.
/ Normal station management.
MELSECNET/10 Remote I / O network.
Remote master station..
Optical loop system.
Cable Connection: Optical GI-50/125.
Transmission format: double loop.
Size: 250(H)×37.5(W)×131(D)mm.
Weight: 0.58kg.
Model: AJ71LP21G.
MELSECNET/10.
PC to PC Network.
/ Normal station management.
MELSECNET/10 Remote I / O network.
Remote master station..
Optical loop system.
Cable Connection: Optical GI-50/125.
Transmission format: double loop.
Size: 250(H)×37.5(W)×131(D)mm.
Weight: 0.58kg.
Mitsubishi Inverter FR-A740-400K
Product Name: Inverter.
Model: FR-A740-400K.
400 KW.
Rated voltage: Three-phase 380 to 500 V.
Applicable motor capacity: 400 kW.
Permissible AC voltage fluctuation: 323 to 528V 50Hz/60Hz.
Power supply capacity: 587 kVA
Cooling system: Forced air cooling.
Approx. mass: 370 Kg.
Product Name: Inverter.
Model: FR-A740-400K.
400 KW.
Rated voltage: Three-phase 380 to 500 V.
Applicable motor capacity: 400 kW.
Permissible AC voltage fluctuation: 323 to 528V 50Hz/60Hz.
Power supply capacity: 587 kVA
Cooling system: Forced air cooling.
Approx. mass: 370 Kg.
ABB Inverter ACS800-01-0050-3
Product Name: Inverter.
Model: ACS800-01-0050-3.
UN = 400 V (Range 380 to 415 V). The power ratings are valid at nominal voltage 400 V.
Rated current available continuously without overloadability at 40 °C: 86A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 112A.
Typical motor power in no-overload use: 45KW
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 80A.
Frame size: R5.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 60A.
Typical motor power in heavy-duty use: 30KW.
Typical motor power in light-overload use: 37Kw.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
Product Name: Inverter.
Model: ACS800-01-0050-3.
UN = 400 V (Range 380 to 415 V). The power ratings are valid at nominal voltage 400 V.
Rated current available continuously without overloadability at 40 °C: 86A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 112A.
Typical motor power in no-overload use: 45KW
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 80A.
Frame size: R5.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 60A.
Typical motor power in heavy-duty use: 30KW.
Typical motor power in light-overload use: 37Kw.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
ABB Inverter ACS800-01-0050-5
Product Name: Inverter.
Model: ACS800-01-0050-5.
UN = 500 V (Range 380 to 500 V). The power ratings are valid at nominal voltage 500 V.
Rated current available continuously without overloadability at 40 °C: 65A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 86A.
Typical motor power in no-overload use: 37KW
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 61A.
Typical motor power in light-overload use: 37Kw.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
Typical motor power in heavy-duty use: 30KW.
Frame size: R5.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 50A.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
Product Name: Inverter.
Model: ACS800-01-0050-5.
UN = 500 V (Range 380 to 500 V). The power ratings are valid at nominal voltage 500 V.
Rated current available continuously without overloadability at 40 °C: 65A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 86A.
Typical motor power in no-overload use: 37KW
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 61A.
Typical motor power in light-overload use: 37Kw.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
Typical motor power in heavy-duty use: 30KW.
Frame size: R5.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 50A.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
Mennekes Connector 23771
Product Name:Connector
Part No.23771.
Ampere :63A.
Poles:3P.
Voltage:40-50V.
Hertz:50-60 Hz.
Earth position:12 h.
Connection technology:Screw terminals.
Contact:nickel plated contacts, highly heat resistant contact carrier.
Protection type:IP44.
with cable gland.
highly heat resistant contact carrier.
nickel plated contacts.
system 2 (63A is not standardized).
Product Name:Connector
Part No.23771.
Ampere :63A.
Poles:3P.
Voltage:40-50V.
Hertz:50-60 Hz.
Earth position:12 h.
Connection technology:Screw terminals.
Contact:nickel plated contacts, highly heat resistant contact carrier.
Protection type:IP44.
with cable gland.
highly heat resistant contact carrier.
nickel plated contacts.
system 2 (63A is not standardized).
Mennekes Stainless steel receptacle combination 83725
Product Name:Stainless steel receptacle combination
Part No.:83725.
Fitted with:1 CEE 16A, 5p, 400V
4 SCHUKO? 16A, 230V.
Fusing:1 RCD 40A, 4p, 0.03A
1 MCB 16A, 3p, C
4 MCB′s 16A, 1p, B.
Pre-fuse max:40A.
InA :32A.
RDF:0.8.
Connection/feeder cable:for 2 cable up to 5 x 25mm2.
Enclosure size:530 x 400 x 220 mm (H x W x D).
Protection type IP44.
stainless steel enclosure (material 1.4301).
surface with a flat finish (K240), material 1.4571 on request.
protection type IP 44 with closed door.
fusing behind a transparent cover.
Product Name:Stainless steel receptacle combination
Part No.:83725.
Fitted with:1 CEE 16A, 5p, 400V
4 SCHUKO? 16A, 230V.
Fusing:1 RCD 40A, 4p, 0.03A
1 MCB 16A, 3p, C
4 MCB′s 16A, 1p, B.
Pre-fuse max:40A.
InA :32A.
RDF:0.8.
Connection/feeder cable:for 2 cable up to 5 x 25mm2.
Enclosure size:530 x 400 x 220 mm (H x W x D).
Protection type IP44.
stainless steel enclosure (material 1.4301).
surface with a flat finish (K240), material 1.4571 on request.
protection type IP 44 with closed door.
fusing behind a transparent cover.
287 Results 12/Page Page 13 of 24 [First Page] << Previous 9 10 11 12 13 14 15 16 17 18 Next >> [Last Page]