CP1E-NA series comes with analog inputs and outputs and how programming and settings
CP1E-NA CP1E-NA series CP1E-NA comes with analog inputs and outputs, and how programming and settings
Re： Time:2016-8-2 14:58:00
Workspace settings, select build AD/DA on the left side of the software, set enabled and span, setting off again after power-on entry into force. Input output 90, 91 190 channels, do not need to write procedures.
Re：Re： Time:2016-8-2 17:22:00
Input if you are using a current signal, you will need to input voltage and current input terminals shorted, then current signal