Catalogue
OMRON ERT1-HD16CH-1 superior supplier ERT1-HD16CH-1 Price
Brand:
OMRON
Country: Japan
Product Name:
Model: ERT1-HD16CH-1
Price(Just for reference): USD$ 0
Inquiry: Inquiry
Previous: 
Next: OMRON ERT1-HD16CH-1 Introduction
OMRON E3ZM-LS87H USD$161.25.
OMRON E5LC-615 USD$92.64.
OMRON E3Z-LL81 2M OMRON ERT1-HD16CH-1 Price USD$270.28.
OMRON E52-CA15A D=1.6 NETU 4M USD$115.56.
OMRON E53-COV07 USD$4.03.
OMRON ERT1 OMRON ERT1-HD16CH-1 Price E6C2-CWZ1X 60P/R 2M USD$154.58.
OMRON OMRON ERT1-HD16CH-1 Price E3S-AR71 2M USD$139.17.
OMRON E2E2-X18MB1-M1 USD$68.19.
OMRON E3Z-T81 2M USD$24.86.
OMRON E2E-X3D1-M1J-T 1M USD$0.
Model: E2EM-X4C1 5M.
DC 3-WIRE/PRE-WIRED MODELS.
Type: Shielded.
Size: M12.
Sensing distance: 4mm.
Output Configuration: NPN.
Operation mode: NO.
Cable Length: 5m.
Model: E2A-M18LS08-M1-B2.
DC 3-wire models NO + NC: DC 4-wire.
Size: M18, Shielded.
Sensing distance: 8mm.
Connection: M12 connector.
Body material: Brass.
Thread length overall length: 61 75.
Output configuration: PNP.<
Model: E6B2-CWZ1X 1200P/R 2M.
Power supply voltage: 5 VDC.
Output configuration: Line-driver output.
Resolution (pulses/rotation): 1200.
Length: 2M.
High Density EtherNet/IP Remote I/O
with Short and Open ERT1 ERT1-ID32SLH-1 Datasheet ERT1-OD32SLH-1 Datasheet Connector ERT1-OD32SLH-1 Datasheet Circuit Detection ERT1-ID32SLH-1 Datasheet
? Simple & Fast Wiring – Cage clamp terminals allow for easy
& fast ERT1-OD32SLH-1 Datasheet wiring saving setup time
? 3 Wire Termination – for cleaner wiring ERT1-MD32SLH-1 Datasheet and easier debugging
? Cage Clamp Connections – for vibration resistant wiring.
? High Density ERT1-MD32SLH-1 Datasheet Wiring – small footprint saves panel space; 32
I/O, 24VDC, PNP--32 inputs, 32 outputs, or 16in/16out ERT1-MD32SLH-1 Datasheet
versions.
Diagnostics that Pinpoint Wiring Shorts and Sensor Errors in Seconds Not Hours
The ERT1 I/O Block detects shorts at the sensor and prevents the short from affecting the rest of the inputs. It
also has LEDs to tell you which input or output is shorted. It also has I/O bits back to the master telling you if an
input or output is shorted or open (broken sensor or broken wire to sensor). Each group of 16 I/O has its own
power terminals and the communications module has its own power terminals. This way the module can also tell
you if power to the I/O terminals is lost.
The LEDs are yellow for on, red for shorted, red flashing for disconnected, and off for off. The short and open
circuit detection can be enabled or disabled for each input/output.
EtherNet/IP Remote I/O Blocks, Cage Clamp Connectors
ERT1-??32SLH--1 ERT1-ID32SLH-1 Datasheet
ERT1-OD32SLH-1 DatasheetERT1-HD16CH-1,ERT1-WD16CH-1 ERT1-HD16CH-1 Price Datasheet download.
...Enquiring more correlate model Price >>>>
OMRON E5LC-615 USD$92.64.
OMRON E3Z-LL81 2M OMRON ERT1-HD16CH-1 Price USD$270.28.
OMRON E52-CA15A D=1.6 NETU 4M USD$115.56.
OMRON E53-COV07 USD$4.03.
OMRON ERT1 OMRON ERT1-HD16CH-1 Price E6C2-CWZ1X 60P/R 2M USD$154.58.
OMRON OMRON ERT1-HD16CH-1 Price E3S-AR71 2M USD$139.17.
OMRON E2E2-X18MB1-M1 USD$68.19.
OMRON E3Z-T81 2M USD$24.86.
OMRON E2E-X3D1-M1J-T 1M USD$0.
Model: E2EM-X4C1 5M.
DC 3-WIRE/PRE-WIRED MODELS.
Type: Shielded.
Size: M12.
Sensing distance: 4mm.
Output Configuration: NPN.
Operation mode: NO.
Cable Length: 5m.
Model: E2A-M18LS08-M1-B2.
DC 3-wire models NO + NC: DC 4-wire.
Size: M18, Shielded.
Sensing distance: 8mm.
Connection: M12 connector.
Body material: Brass.
Thread length overall length: 61 75.
Output configuration: PNP.<
Model: E6B2-CWZ1X 1200P/R 2M.
Power supply voltage: 5 VDC.
Output configuration: Line-driver output.
Resolution (pulses/rotation): 1200.
Length: 2M.
High Density EtherNet/IP Remote I/O
with Short and Open ERT1 ERT1-ID32SLH-1 Datasheet ERT1-OD32SLH-1 Datasheet Connector ERT1-OD32SLH-1 Datasheet Circuit Detection ERT1-ID32SLH-1 Datasheet
? Simple & Fast Wiring – Cage clamp terminals allow for easy
& fast ERT1-OD32SLH-1 Datasheet wiring saving setup time
? 3 Wire Termination – for cleaner wiring ERT1-MD32SLH-1 Datasheet and easier debugging
? Cage Clamp Connections – for vibration resistant wiring.
? High Density ERT1-MD32SLH-1 Datasheet Wiring – small footprint saves panel space; 32
I/O, 24VDC, PNP--32 inputs, 32 outputs, or 16in/16out ERT1-MD32SLH-1 Datasheet
versions.
Diagnostics that Pinpoint Wiring Shorts and Sensor Errors in Seconds Not Hours
The ERT1 I/O Block detects shorts at the sensor and prevents the short from affecting the rest of the inputs. It
also has LEDs to tell you which input or output is shorted. It also has I/O bits back to the master telling you if an
input or output is shorted or open (broken sensor or broken wire to sensor). Each group of 16 I/O has its own
power terminals and the communications module has its own power terminals. This way the module can also tell
you if power to the I/O terminals is lost.
The LEDs are yellow for on, red for shorted, red flashing for disconnected, and off for off. The short and open
circuit detection can be enabled or disabled for each input/output.
EtherNet/IP Remote I/O Blocks, Cage Clamp Connectors
ERT1-??32SLH--1 ERT1-ID32SLH-1 Datasheet
ERT1-OD32SLH-1 Datasheet
...Enquiring more correlate model Price >>>>
Related Products
OMRON
Cylindrical Proximity Sensor
E2A-S08LS02-WP-C1 2M
Model: E2A-S08LS02-WP-C1 2M. rDC 3-wi
OMRON
Proximity Sensor
E2E-X1R5F2-M1
Model: E2E-X1R5F2-M1. rShielded DC 3-
OMRON
Digital Fiber Sensor
E3X-DAB11-S 2M
Model: E3X-DAB11-S 2M. rItem: Mark-de
OMRON
Super-compact Proximity Sensor
E2S-W23B 5M
Model: E2S-W23B 5M. rDC 3-Wire Models