Mitsubishi FR-F740P/FR-F720P datasheet PDF catalog Inverter

*1 The applicable motor capacity indicated is the maximum capacity applicable FR-F720P catalog for use of the Mitsubishi FR-F740P FR-F740P catalog 4-pole standard FR-F720P catalog motor. To use a dedicated IPM
motor, refer to page 88, 90.
*2 The rated FR-F740P catalog output capacity FR-F720P catalog indicated assumes that the output voltage is 220V.
*3 When operating FR-F740P PDF the inverter with the carrier frequency set to 3kHz or more, the carrier frequency automatically FR-F740P PDF decreases if the inverter output current
exceeds the value in parentheses of the rated current. This FR-F740P PDF may cause the motor noise to increase.
*4 The % value of the overload current rating indicated is the ratio of the overload current to the inverter's rated output current. For repeated duty, allow
time for the inverter and motor to return to or below the temperatures under 100% load.
*5 The maximum output voltage does not exceed the power supply voltage. The maximum output voltage can be changed within the setting range.
However, the pulse voltage value of the inverter output side voltage remains unchanged at about that of the power supply.
*6 The power supply capacity varies with the value of the power supply side inverter impedance (including those of the input reactor and cables).
*7 When the hook of the inverter front cover is cut off for installation of the plug-in option, protective structure of the inverter changes to an open type
(IP00).
*8 FR-DU07: IP40 (except for the PU connector)
Mitsubishi FR-F740PJ-0.4K to 15K (F) Inverter Manual PDF.
Mitsubishi FR-F740P Manual PDF.
Mitsubishi FR-F740PJ-0.4K to 15K (F) Manual PPDF.
Mitsubishi FR-F740P catalog FR-F740P PDF Manual Inverter.
Mitsubishi FR-F740PJ/FRR-F720PJ FR-F720P catalog catalog and datasheet FR-F740PJ/FR-F720PJ PDF.