Mitsubishi CNC M800W Manual PDF

Characteristics of operation panel I/O unit are as follows.
(1) Operation panel M800W PDF (display unit section) and electric cabinet (control unit section) M800W Manual are wired with J210 cable.
The communication M800W PDF of all signals including the emergency stop signal to be set to M800W M800W Manual M800W PDF the operation panel are
performed with J210 cable and this is effective M800W Connection and Setup manual to simplify the wiring.
(2) Number of DI/DO points that are mounted on the operation panel is 64/64.
Input M800W Connection and Setup manual can be switched between sink and source. Output is source output.
(3) Remote I/O 2.0 is M800W Connection and Setup manual adopted and up to 64 stations can be connected in the whole of other part systems.
Number of addable units varies according to the type of the operation panel I/O unit as follows.
FCU8-DX830: 10 stations are occupied and 54 stations remain, 32 points/32 points × 54 stations, as result,
up to 1728 points/1728 points can be expanded in total.
FCU8-DX837: 12 stations are occupied and 52 stations remain, 32 points/32 points × 54 stations, as result,
up to 1664 points/1664 points can be expanded in total.
(4) Safety input conforming to safety standards is available by adopting remote I/O 2.0.
FCU8-DX837: Number of input points is 8.
(5) 3ch of manual pulse generators can be connected.
5V and 12V manual pulse generators can be connected.
(6) DO output can output 200mA/point.
(Total output current of whole unit is 3.8A at the maximum.)
Mitsubishi CNC M800/M80 Manual PDF.
M800/M80 Manual Mitsubishi M800/M80 PDF Instruction Manual.
Mitsubishi CNC M800/M80 Manual(Specifications) PDF.
Mitsubiishi M800W Manual M800S/M80 CNC Manual PDF.
Mitsubishi M800/M80 CNC Manual PDF.
M800/M80 M800W PDF Manual Mitsubishi M800/M80 PDF Alarm/Parameter Manual.