Mitsubishi Ethernet Modle A1SJ71E71N-B5T
Model : A1SJ71E71N-B5T.
Interface: 10BASE-T/10BASE5.
Data transmission rate: 10Mbps.
Size: 130(H)×34.5(W)×94(D)mm.
Weight: 0.20kg.

Mitsubishi Positioning Module A1SD75P1-S3
Product: Positioning Module.
Model: A1SD75P1-S3.
Outline: 1 axis; control unit: pulse, mm, inch, degree; no.of positioning data: 600 pieces/axis; max.output pulse: 400 kpps (differential driver), 200 kpps (open collector); 36-pin connector.

Mitsubishi High speed counter Module A1SD62
Product: High speed counter Module.
Model: A1SD62.
Outline: 2 channels; 100/10 kpps; count input signal: 5/12/24 V DC; external input: 5/12/24 V DC; coincidence output: transistor (sink), 12/24 V DC, 0.5 A/point, 2 A/common; 20-point terminal block.

Mitsubishi CPU A172SHCPU
Model : A172SHCPU.
Number of controlled axes : 8-axis.
Sequence Program Memory capacity: 30k steps max.
Sequence control i/o points: 1024 points.

Mitsubishi Extension cable A1SC03B
Product: Extension cable.
Model: A1SC03B.
Outline: For extension base connection, 0.3 m * One cable per extension base required.

Mitsubishi Temperature input Module A1S68TD
Product: Temperature input Module.
Model: A1S68TD.
Outline: 8 channels, thermocouple (K, E, J, T, B, R, S), conversion speed: 400 ms/8 channels, 20-point terminal block.

Mitsubishi Interrupt Module A1SI61
Model : A1SI61.
Number of interrupt inputs: 16 points (four units set the interrupt condition).
Rated input voltage: DC12V/24V.
Rated input current: About 4mA (DC12V) 8mA about / (DC24V).
Size: 130(H)×34.5(W)×93.6(D)mm.
Weight: 0.20kg.

Mitsubishi QA1S extension base unit QA1S68B
Model: QA1S68B.
8-slot.
AnS Series Power Supply Unit Interface.
AnS Series wearable unit.
QA1S extension base unit
5-slot expansion units QA1S base (for mounting the power supply unit) is.
AnS series unit can be mounted..
Size: 130mm * 430mm * 51.2mm.
Weight: 1kg.

Mitsubishi DC Input Module A1SX41-S2
Product: DC Input Module.
Model: A1SX41-S2.
Outline: 32 points, 24 V DC, 7 mA, response time: 10 ms, 32 points/common, positive common, 40-pin connector, for high leakage current sensor.

Mitsubishi QA1S base unit QA1S38B
Model: QA1S38B.
8-slot.
AnS Series Power Supply Unit Interface.
AnS Series wearable unit.
A mode for the CPU base unit
The three-slot base unit QA1S.
AnS series unit can be mounted.
Size: 130mm * 430mm * 51.2mm.
Weight: 1kg.

Mitsubishi Main base unit A175B
Model: A175B.
Motion Unit 1 Unit.
Yes PLC unit 4 unit attached.

Mitsubishi Memory cassette A1SNMCA-8KE
Product: Memory cassette.
Model: A1SNMCA-8KE.
Outline: Program capacity: 8 k steps, EEPROM cassette (exclusively for A1S, A1SH, A1SJ, and A1SJH).