OMRON Slave Racks C200H-RT202
24 VDC, Wired.

OMRON DC Input/Transistor Output Unit CS1W-MD262
Product name: DC Input/Transistor Output Unit.
Model: CS1W-MD262.
Input points: 32 pts.
Output points: 32 pts.
Input voltage: 24 VDC.
Max. switching capacity: 24 VDC, 0.3 A, sourcing, load short protection, alarm.
Connections: Connector.

OMRON Input Module C500-ID212(3G2A5-ID212)

OMRON AC/DC Input Module C500-IM212(3G2A5-IM212)

OMRON Output Unit C500-OD211(3G2A5-OD211)

Mitsubishi AC input/Triac output module AJ35PTF-56AS

Mitsubishi Dynamic Input Module A1S42X
Product: Dynamic Input Module.
Model: A1S42X.
Outline: 16/32/48/64 points, 12/24 V DC, 4/9 mA, response time: 0.4 ms, 24-pin connector, high-speed dynamic input.

Mitsubishi Transistor Output Module A1SY60E
Product: Transistor Output Module.
Model: A1SY60E.
Outline: 16 points, 5/12/24 V DC, leakage at OFF: 0.1 mA, response time: 10 ms, 8 points/common, source type, 20-point terminal block, with fuse and surge suppressor.

Mitsubishi Servo amplifier MR-JE-100B
Product Name: Servo amplifier.
Model: MR-JE-100B.
1.0 kW, 3-phase or 1-phase 200 V AC to 240 V AC.
Output Rated voltage: 3-phase 170 V AC.
Output Rated current: 6.0 A.
Control method: Sine-wave PWM control/current control method.
Dynamic brake: Built-in.

Proface HMI(Modular) PFXLM4B01DDC

Proface HMI(Control) LT3300-L1-D24-K
Product Name: HMI(Control).
Model: LT3300-L1-D24-K(sink).
Display Type and Size: Monochrome lcd(5.7in).
Graphic Display Resolution: 320*240 pixels(QVGA).
Backlight: whilte led.
Display Area: W115.2mm x H86.4mm [4.54in x 3.4in].
Built in DIO (Input): 16 points.
Built in DIO (Output): 16 points.
Touch Screen: Resistive Film(analog).
Display Colors: monochrome(16 levels).
Programming Memory: 6mb flash EPROM.
Input Voltage: 24 VDC.
Serial: RS232C/422/485.
Ethernet: yes.
I/O Expansion: 3 EXM Modules.

ABB Inverter ACS355-01X-04A7-2
Product Name: Inverter.
Model: ACS355-01X-04A7-2.
Frame size: R1.
Typical motor power in 400 V at normal use: 0.75kw.
Typical motor power in 460 V at normal use: 1.0hp.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 4.7A.
1-phase AC supply, 200 to 240 V.
Current rating represents the rated continuous drive output current inside the drive specification.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
This code states the factory installed SW variants to the drive.