Mitsubishi Relay Output module AY11A
Model: AY11A.
Contact output: 16 points, DC24V/AC240V, 2A/1 point, 16A / All points.
Response time: 12ms.
Common all points independent.
38-point terminal block.
Size: 250(H)×37.5(W)×131(D)mm.
Weight: 0.39kg.

Mitsubishi Input module A0J2-E32D
Product: Input module.
Model: A0J2-E32D.
Outline: 32 points, 12/24 V DC, 3/7 mA, response time: 10 ms, 16 points/common, positive common, 36-point terminal block.

Mitsubishi PLC FX1N-14MT-ESS/UL

Mitsubishi Power Supply Unit FX2N-20PSU

Mitsubishi PLC FX3U-16MR/ES

Mitsubishi Servo Motor (400V AC) HC-SFS1024B

Proface Touch Screen PFXGP4501TADW
Product Name: Touch Screen.
Model: PFXGP4501TADW .
Programming Memory: 16mb flash EPROM.
SD Card: 1.
Serial Ports(COM1): RS-232C.
Serial Ports (COM2): RS-422/485.
Ethernet: 1.
Graphic Display Resolution: 640*480 pixels(VGA).
Input Voltage: 24 VDC.
Display Type and Size: TFT Color LCD(10.4").
Display Colors: 65, 536 Colors(no blink) / 16, 384 Colors(blink).
Display Area: W 211.2 x H 158.4 mm [W 8.31 x H 6.24 in].
Touch Screen: Resistive Film(matrix).
Backlight: White LED.

Proface HMI(Control) LT3301-L1-D24-K
Product Name: HMI(Control).
Model: LT3301-L1-D24-K(sink).
I/O Expansion: 3 EXM Modules.
Graphic Display Resolution: 320*240 pixels(QVGA).
Display Colors: monochrome(8 levels).
Display Area: W115.2mm x H86.4mm [4.54in x 3.4in].
Built in DIO (Input): 16 points.
Built in DIO (Output): 16 points.
Touch Screen: Resistive Film(analog).
Backlight: whilte led.
Programming Memory: 6mb flash EPROM.
Input Voltage: 24 VDC.
Serial: RS232C/422/485.
Ethernet: n/a.
Display Type and Size: Monochrome lcd(5.7in).

ABB Inverter ACS550-01-246A-4
Product Name: Inverter.
Model: ACS550-01-246A-4.
3-phase supply voltage 380 to 480 V.
Wall-mounted units.
Typical motor power in 400 V at normal use: 132kw.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 192A.
Continuous rms current. 10% overload is allowed for one minute in ten minutes: 246A.
Typical motor power in 400 V at heavy-duty use: 110KW.
Typical motor power in 460 V at heavy-duty use: 150HP.
Typical motor power in 460 V at normal use: 200hp.
Frame size: R6.

ABB Inverter ACS800-01-0030-5
Product Name: Inverter.
Model: ACS800-01-0030-5.
UN = 500 V (Range 380 to 500 V). The power ratings are valid at nominal voltage 500 V.
Rated current available continuously without overloadability at 40 °C: 42A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 62A.
Typical motor power in no-overload use: 22KW
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 39A.
Frame size: R4.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 32A.
Typical motor power in heavy-duty use: 18.5KW.
Typical motor power in light-overload use: 22Kw.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.

OMRON I/O Expansion Module ZEN-8E1DT

OMRON Ultrasonic Sensor E4A-3KDC12-24