Mitsubishi Input/Output module A0J2-E28AR
Product: Input/Output module.
Model: A0J2-E28AR.
Outline: Input: 16 points, 100 to 120 V AC, 10 mA, response time: 35 ms, 16 points/common
Output: 12 points, 24 V DC/240 V AC, 2 A/point, 5 A/common, response time: 12 ms, 8 points/common, 3 points/common, independent contact, 36-point terminal blockblock.
Product: Input/Output module.
Model: A0J2-E28AR.
Outline: Input: 16 points, 100 to 120 V AC, 10 mA, response time: 35 ms, 16 points/common
Output: 12 points, 24 V DC/240 V AC, 2 A/point, 5 A/common, response time: 12 ms, 8 points/common, 3 points/common, independent contact, 36-point terminal blockblock.
Mitsubishi Base unit A35B
Model: A35B.
5 slots.
Allow the power supply unit installed.
Wearable QnA / A Series unit.
Size: 250(H)×382(W)×29(D)mm.
Weight: 1.5kg.
Model: A35B.
5 slots.
Allow the power supply unit installed.
Wearable QnA / A Series unit.
Size: 250(H)×382(W)×29(D)mm.
Weight: 1.5kg.
Mennekes Name:Receptacle strip 96438
Product Name:Receptacle strip
Part No.:96438.
Fitted with:1 CEE 16A, 5p, 400V.
2 SCHUKO? 16A, 230V.
Connection/feeder cable:for 1 cable up to 5 x 10mm2.
Enclosure size:410 x 97 mm (H x W).
Protection type: IP44.
pre-wired for installation.
enclosure grey RAL 7035.
enclosure and insert made of AMAPLAST.
hanging clip enclosed.
Product Name:Receptacle strip
Part No.:96438.
Fitted with:1 CEE 16A, 5p, 400V.
2 SCHUKO? 16A, 230V.
Connection/feeder cable:for 1 cable up to 5 x 10mm2.
Enclosure size:410 x 97 mm (H x W).
Protection type: IP44.
pre-wired for installation.
enclosure grey RAL 7035.
enclosure and insert made of AMAPLAST.
hanging clip enclosed.
Mennekes Panel mounted inlet 3583
Product Name:Panel mounted inlet
Part No.:3583.
Ampere:125A.
Poles:4p
Voltage:400V.
Earth position:6h.
Hertz 50-60Hz.
Connection technology:screw terminals.
Contact:nickel plated contacts, highly heat resistant contact carrier.
screw terminals.
with highly heat resistant contact carrier.
nickel plated contacts.
Product Name:Panel mounted inlet
Part No.:3583.
Ampere:125A.
Poles:4p
Voltage:400V.
Earth position:6h.
Hertz 50-60Hz.
Connection technology:screw terminals.
Contact:nickel plated contacts, highly heat resistant contact carrier.
screw terminals.
with highly heat resistant contact carrier.
nickel plated contacts.
Mitsubishi AC Input Module A1SX10
Product: AC Input Module.
Model: A1SX10.
Outline: 16 points, 100 to 120 V AC, 6 mA, response time: 35 ms, 16 points/common, 20-point terminal block.
Product: AC Input Module.
Model: A1SX10.
Outline: 16 points, 100 to 120 V AC, 6 mA, response time: 35 ms, 16 points/common, 20-point terminal block.
ABB Inverter ACS800-01-0255-5
Product Name: Inverter.
Model: ACS800-01-0255-5.
UN = 500 V (Range 380 to 500 V). The power ratings are valid at nominal voltage 500 V.
Rated current available continuously without overloadability at 40 °C: 290A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 351A.
Typical motor power in no-overload use: 200KW
Frame size: R6.
Typical motor power in light-overload use: 200Kw.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 234A.
Typical motor power in heavy-duty use: 160KW.
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 285A.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
Product Name: Inverter.
Model: ACS800-01-0255-5.
UN = 500 V (Range 380 to 500 V). The power ratings are valid at nominal voltage 500 V.
Rated current available continuously without overloadability at 40 °C: 290A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 351A.
Typical motor power in no-overload use: 200KW
Frame size: R6.
Typical motor power in light-overload use: 200Kw.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 234A.
Typical motor power in heavy-duty use: 160KW.
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 285A.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
ABB Inverter ACS355-03X-07A3-4
Product Name: Inverter.
Model: ACS355-03X-07A3-4.
3-phase AC supply, 380 to 480 V.
Typical motor power in 400 V at normal use: 3.0kw.
Current rating represents the rated continuous drive output current inside the drive specification.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 7.3A.
Frame size: R1.
Typical motor power in 460 V at normal use: 3.0hp.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
This code states the factory installed SW variants to the drive.
Product Name: Inverter.
Model: ACS355-03X-07A3-4.
3-phase AC supply, 380 to 480 V.
Typical motor power in 400 V at normal use: 3.0kw.
Current rating represents the rated continuous drive output current inside the drive specification.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 7.3A.
Frame size: R1.
Typical motor power in 460 V at normal use: 3.0hp.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
This code states the factory installed SW variants to the drive.
404 Results 12/Page Page 7 of 34 [First Page] << Previous 3 4 5 6 7 8 9 10 11 12 Next >> [Last Page]