Home >> Products >> 34
Mitsubishimaster unitA1SJ71J92-S3
Model : A1SJ71J92-S3.
JEMANET (OPCN-1) Master Station Interface Unit.
Transmission speed: 125k, 250k, 500k, 1Mbps (selected by DIP switch).
Size: 130(H)×34.5(W)×119.8(D)mm.
Weight: 0.31kg.
Mitsubishi Serial Communications Module A1SJ71QC24N
Model : A1SJ71QC24N.
RS-232 1 channel.
RS-422/485 1 channel.
Transmission speed: 115.2kbps total of 2 channels.
Size: 130(H)×34.5(W)×93.6(D)mm.
Weight: 0.30kg.
Proface HMI AGP3600-T1-D24-D81C
Product Name: HMI(w/dicrete i/o).
Model: AGP3500-T1-D24-D81C(Source).
Display Type and Size: TFT Color LCD(12.1in).
Touch Screen: Resistive Film(analog).
Display Colors: 65536 COLRS(NO Blink)/16384 colors(blink).
Display Area: W248 x H186.5 mm [W9.76 x H7.34 in].
CF Card: 1 slot, type II.
Serial Ports (COM1): RS-232C/422/485.
Graphic Display Resolution: 800*600 pixels(VGA).
Backlight: LED OR CCFL.
Programming Memory: 16mb flash EPROM.
Input Voltage: 24 VDC.
Ethernet: yes.
ABB Inverter ACS800-01-0020-3
Product Name: Inverter.
Model: ACS800-01-0020-3.
UN = 400 V (Range 380 to 415 V). The power ratings are valid at nominal voltage 400 V.
Rated current available continuously without overloadability at 40 °C: 34A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 46A.
Typical motor power in no-overload use: 15KW
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
Typical motor power in light-overload use: 15Kw.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 23A.
Typical motor power in heavy-duty use: 11KW.
Frame size: R3.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 31A.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
Mennekes EverGUM receptacle combination 70449
Product Name:EverGUM receptacle combination
Part No.:70449.
Fitted with:1 CEE 32A, 5p, 400V
1 CEE 16A, 5p, 400V
8 SCHUKO? 16A, 230V.
Fusing:1 RCD 40A, 4p, 0.03A
1 MCB 16A, 3p,C
4 MCB′s 16A, 1p, B.
Pre-fuse max:32A.
InA :32A.
RDF:0.9.
Connection/feeder cable:1 inlet 32A, 5p, 400VEnclosure size:360 x 340. x 330 mm (L x W x H).
Protection type IP44.
solid rubber enclosure, signal yellow RAL 1003.
pre-wired for installation.
Mennekes Wall mounted phase inverter inlet 3342
Product Name:Wall mounted phase inverter inlet
Part No.:3342.
Ampere:16A.
Poles:4p
Voltage:230V.
Earth position:9h.
Hertz 50-60Hz.
Connection technology:screw terminals.
Contact:standard.
Protection type IP44.
screw terminals.
cable entry for 32A devices also possible on the back side.
enclosure base with stamped recess for quick cutting out.
274 Results 12/Page Page 7 of 23     [First Page] << Previous 3 4 5 6 7 8 9 10 11 12 Next >> [Last Page]