OMRON I/O Control Unit CQM1H-II101
Model: CQM1H-II101.
Connects to left-hand side of Expansion I/O block.

Mitsubishi Terminal block adapter Q6TA32-TOL

Mitsubishi Serial absolute synchronous encoder cable Q170ENCCBL30M

Mitsubishi AC/DC Input Module QX50

Mitsubishi Transistor Output Module QY80-TS

Mitsubishi Bus connection unit GT15-75ABUS2L

ABB Inverter ACS800-01-0100-7
Product Name: Inverter.
Model: ACS800-01-0100-7.
Frame size: R6.
Rated current available continuously without overloadability at 40 °C: 93A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 124A.
Typical motor power in no-overload use: 90KW
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 86A.
Typical motor power in light-overload use: 75Kw.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 62A.
Typical motor power in heavy-duty use: 55KW.
UN = 690 V (Range 525 to 690 V). The power ratings are valid at nominal voltage 690 V.
ACS800-01 without cable connection box does not ful? ll IP21 reQuirements.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.

OMRON Touch Screen NS5-MQ11-V2

OMRON Operator Interface Terminal NP5-MQ001B

Mennekes Connector StarTOP with SafeCONTACT 994
Product Name:Connector StarTOP? with SafeCONTACT
Part No.:994.
Ampere:16A.
Poles:4p
Voltage:400V.
Earth position:6h.
Hertz 50-60Hz.
Connection technology:Screwless - SafeCONTACT.
Contact:standard.
Protection type IP44.
screwless, with insulation displacing techniQue.
SafeCONTACT.
cable gland and sealing.
strain relief and protection against kinking.
enclosure with thread lock and safety slide.

Mennekes Stainless steel receptacle combination 83744
Product Name:Stainless steel receptacle combination
Part No.:83744.
Fitted with:1 CEE 32A, 5p, 400V
1 CEE 16A, 5p, 400V
2 SCHUKO? 16A, 230V.
Fusing:1 RCD 63A, 4p, 0.03A
1 MCB 32A, 3p, C
1 MCB 16A, 3p, C
2 MCB′s 16A, 1p, B.
Pre-fuse max:100A.
InA :44A.
RDF:0.7.
Connection/feeder cable:for 2 cable up to 5 x 25mm2.
Enclosure size:530 x 400 x 220 mm (H x W x D).
Protection type IP44.
stainless steel enclosure (material 1.4301).
surface with a flat finish (K240), material 1.4571 on reQuest.
protection type IP 44 with closed door.

Mennekes Wall mounted phase inverter inlet 3342
Product Name:Wall mounted phase inverter inlet
Part No.:3342.
Ampere:16A.
Poles:4p
Voltage:230V.
Earth position:9h.
Hertz 50-60Hz.
Connection technology:screw terminals.
Contact:standard.
Protection type IP44.
screw terminals.
cable entry for 32A devices also possible on the back side.
enclosure base with stamped recess for Quick cutting out.