OMRON CPU Unit CJ1H-CPU67H-R
Brand: OMRON.
Product name: CPU Unit.
Model: CJ1H-CPU67H-R.
I/O capacity/Mountable Units (Expansion Racks): 2, 560 points/40 Units(3 Expansion Racks max.).
CJ1H-CPU67H-R Program capacity: 250K steps.
Data memory capacity: 448K words(DM: 32K words, EM: 32K words × 13 bank).
OMRON CJ1H-CPU67H-R LD instruction execution time: 0.01

OMRON Triac Output Unit CS1W-OA211
Model: CS1W-OA211.
250 V AC, 0.5 A, 16 outputs.

Mitsubishi AC input/Relay Output module AJ35PTF-56AR

Mitsubishi CPU Q2AHCPU-S1
Model: Q2AHCPU-S1.
I/O points: 1024 points.
I/O device points: 8192 points.
Program capacity: 60k steps.
Basic instruction processing speed instruction (LD): 0.20μs.
Size: 250 x 79.5 x 121MM.
Weight: 0.80kg.

Mitsubishi DC input module AX60-S1
Model: AX60-S1.
Input DC: 16 points DC100/110/125V 2mA.
Response time: 20ms.
8 points per common.
Plus common type of shared / negative common.
20-point terminal block.
Size: 250(H)×37.5(W)×121(D)mm.
Weight: 0.40kg.

Mitsubishi Transistor Output module AY60E
Model: AY60E.
Transistor outputs: 16 points.DC24V(12/48V), 2A/1 Point(0.8A/1 Point), 5A/1 common(3A/1 common).
Response time: 2ms.
8 points per common.
Source type
20-point terminal block.
Size: 250(H)×37.5(W)×121(D)mm.
Weight: 0.63kg.

Mitsubishi Digital - analog conversion module A616DAV
Model: A616DAV.
16-channel.
Input (resolution): 4000 -4000.
Output: DC-5 ~ 5V, DC-10 ~ 10V.
Conversion rate: +2 ms 0.5ms × Number of Channels.
8-point terminal block.
Size: 250(H)×37.5(W)×131(D)mm.
Weight: 0.65kg.

Mitsubishi MELSECNET/H communication unit GT15-J71LP23-25

Mitsubishi GT11 Touch screen GT1155-QTBD

Proface Bus Conversion Unit PSL-CONV00
for GP-260x/ 250x Series

ABB Inverter ACS355-03X-38A0-4
Product Name: Inverter.
Model: ACS355-03X-38A0-4.
3-phase AC supply, 380 to 480 V.
Typical motor power in 400 V at normal use: 18.5kw.
Current rating represents the rated continuous drive output current inside the drive specification.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 38.0A.
Frame size: R4.
Typical motor power in 460 V at normal use: 25.0hp.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
This code states the factory installed SW variants to the drive.

ABB Inverter ACS800-01-0020-2
Product Name: Inverter.
Model: ACS800-01-0020-2.
Frame size: R4.
Rated current available continuously without overloadability at 40 °C: 55A
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 72A.
Typical motor power in no-overload use: 15KW
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 50A.
Typical motor power in light-overload use: 15Kw.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 37A.
Typical motor power in heavy-duty use: 7.5KW.
UN = 230 V (Range 208 to 240 V). The power ratings are valid at nominal voltage 230 V.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.