OMRON Transistor Output Unit C500-OC221-E(3G2A5-OC221-E)

Mitsubishi CPU Q2AHCPU
Model: Q2AHCPU.
I/O points: 512 points.
I/O device points: 8192 points.
Program capacity: 28k steps.
Basic instruction processing speed instruction (LD): 0.20μs.
Size: 250 x 79.5 x 121MM.
Weight: 0.80kg.

Mitsubishi Serial Communications modules AJ71QC24N-R4
Model: AJ71QC24N-R4.
RS-422 1 channel, RS-422/485 1 channel.
Transmission speed: 115.2kbps total of two channels.
Size: 250(H)×37.5(W)×113.5(D)mm.
Weight: 0.39kg.

Mitsubishi Serial Communications modules AJ71QC24-R2
Model: AJ71QC24-R2.
RS-232 2 channel.
Transmission speed: 0.3 ~ 19.2kbps.
Size: 250(H)×37.5(W)×113.5(D)mm.
Weight: 0.37kg.

Mitsubishi MELSECNET/B data link system AJ72T25B
Model: AJ72T25B.
Department MELSECNET / B Remote I / O.
Shielded twisted-pair data link system.
Connection cable: twisted-pair cable.
Transmission format: single bus.
Size: 250(H)×37.5(W)×135(D)mm.
Weight: 0.58kg.

Mitsubishi Positioning Module AD71-S1
Model: AD71-S1.
Control axes: 2 axes.
Number Of I/O Points: 32 Points.
Modes: Positioning Control Mode.
Size: 250 * 37.5 * 121 MM
Weight: 0.63KG.

Mitsubishi RS-232 cable GT09-C30R2-25P

ABB Inverter ACS550-01-045A-4
Product Name: Inverter.
Model: ACS550-01-045A-4.
3-phase supply voltage 380 to 480 V.
Wall-mounted units.
Typical motor power in 400 V at normal use: 22kw.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 38A.
Continuous rms current. 10% overload is allowed for one minute in ten minutes: 45A.
Typical motor power in 400 V at heavy-duty use: 18.5KW.
Typical motor power in 460 V at heavy-duty use: 25HP.
Typical motor power in 460 V at normal use: 30hp.
Frame size: R3.

ABB Inverter ACS800-01-0205-5
Product Name: Inverter.
Model: ACS800-01-0205-5.
UN = 500 V (Range 380 to 500 V). The power ratings are valid at nominal voltage 500 V.
Rated current available continuously without overloadability at 40 °C: 260A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 326A.
Typical motor power in no-overload use: 160KW
Frame size: R6.
Typical motor power in light-overload use: 160Kw.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 215A.
Typical motor power in heavy-duty use: 132KW.
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 254A.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.

OMRON Relay Output Terminal GX-OC1601

OMRON EEPROM (256 K) EEROM-JD

OMRON Standard Fiber Optic Sensor E32-D25Y 2M