ABB Inverter ACS355-03X-05A6-4
Product Name: Inverter.
Model: ACS355-03X-05A6-4.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
Typical motor power in 400 V at normal use: 2.2kw.
Typical motor power in 460 V at normal use: 3.0hp.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 5.6A.
Frame size: R1.
Current rating represents the rated continuous drive output current inside the drive specification.
3-phase AC supply, 380 to 480 V.
This code states the factory installed SW variants to the drive.
Product Name: Inverter.
Model: ACS355-03X-05A6-4.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
Typical motor power in 400 V at normal use: 2.2kw.
Typical motor power in 460 V at normal use: 3.0hp.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 5.6A.
Frame size: R1.
Current rating represents the rated continuous drive output current inside the drive specification.
3-phase AC supply, 380 to 480 V.
This code states the factory installed SW variants to the drive.
ABB Inverter ACS355-03X-23A1-4
Product Name: Inverter.
Model: ACS355-03X-23A1-4.
3-phase AC supply, 380 to 480 V.
Typical motor power in 400 V at normal use: 11.0kw.
Frame size: R3.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 23.1A.
Typical motor power in 460 V at normal use: 15.0hp.
Current rating represents the rated continuous drive output current inside the drive specification.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
This code states the factory installed SW variants to the drive.
Product Name: Inverter.
Model: ACS355-03X-23A1-4.
3-phase AC supply, 380 to 480 V.
Typical motor power in 400 V at normal use: 11.0kw.
Frame size: R3.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 23.1A.
Typical motor power in 460 V at normal use: 15.0hp.
Current rating represents the rated continuous drive output current inside the drive specification.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
This code states the factory installed SW variants to the drive.
Mennekes Wall mounted receptacle 7635
Product Name:Wall mounted receptacle
Part No.:7635.
Ampere:32A.
Poles:4p.
Voltage:500V.
Earth position :7h.
Hertz50-60 Hz.
Connection technology:screw terminals.
Contact: standard.
Protection type IP67.
screw terminals.
for horizontal installation.
switched.
mechanical DUO-interlock.
receptacles can be padlocked.
Product Name:Wall mounted receptacle
Part No.:7635.
Ampere:32A.
Poles:4p.
Voltage:500V.
Earth position :7h.
Hertz50-60 Hz.
Connection technology:screw terminals.
Contact: standard.
Protection type IP67.
screw terminals.
for horizontal installation.
switched.
mechanical DUO-interlock.
receptacles can be padlocked.
Mennekes Wall mounted receptacle 7035
Product Name:Wall mounted receptacle
Part No.:7035.
Ampere:63A.
Poles:4p.
Voltage:400V.
Earth position :6h.
Hertz50-60 Hz.
Connection technology:screw terminals.
Contact: standrad.
Protection type IP67.
screw terminals.
SoftCONTACT.
contactor and electrical PCS interlock.
3 pole socket fuse D III (E 33).
Product Name:Wall mounted receptacle
Part No.:7035.
Ampere:63A.
Poles:4p.
Voltage:400V.
Earth position :6h.
Hertz50-60 Hz.
Connection technology:screw terminals.
Contact: standrad.
Protection type IP67.
screw terminals.
SoftCONTACT.
contactor and electrical PCS interlock.
3 pole socket fuse D III (E 33).
Mennekes Panel mounted receptacle 1735
Product Name:Panel mounted receptacle with TwinCONTACT
Part No.:1735.
Ampere:32A.
Poles:3p.
Voltage:400V.
Earth position :9h.
Hertz50-60 Hz.
Connection technology:Screwless - TwinCONTACT.
Contact: standrad.
Protection type IP44.
screwless spring terminals.
suitable for through wiring.
flange: 73,5 x 64 mm.
fixing hole spacing: 60 x 52 mm.
20° inclination.
Product Name:Panel mounted receptacle with TwinCONTACT
Part No.:1735.
Ampere:32A.
Poles:3p.
Voltage:400V.
Earth position :9h.
Hertz50-60 Hz.
Connection technology:Screwless - TwinCONTACT.
Contact: standrad.
Protection type IP44.
screwless spring terminals.
suitable for through wiring.
flange: 73,5 x 64 mm.
fixing hole spacing: 60 x 52 mm.
20° inclination.