Mennekes EverGUM receptacle combination 70410
Product Name:EverGUM receptacle combination
Part No.:70410.
Fitted with:2 CEE 16A, 5p, 400V
4 SCHUKO? 16A, 230V.
Fusing:1 RCD 40A, 4p, 0.03A
2 MCB′s 16A, 1p, B.
Pre-fuse max:16A.
InA :16A.
RDF:1.
Connection/feeder cable:1 inlet 16A, 5p, 400V.
Enclosure size:306 x 230 x 288 mm (L x W x H).
Protection type IP44.
solid rubber enclosure, signal yellow RAL 1003.
pre-wired for installation.
Product Name:EverGUM receptacle combination
Part No.:70410.
Fitted with:2 CEE 16A, 5p, 400V
4 SCHUKO? 16A, 230V.
Fusing:1 RCD 40A, 4p, 0.03A
2 MCB′s 16A, 1p, B.
Pre-fuse max:16A.
InA :16A.
RDF:1.
Connection/feeder cable:1 inlet 16A, 5p, 400V.
Enclosure size:306 x 230 x 288 mm (L x W x H).
Protection type IP44.
solid rubber enclosure, signal yellow RAL 1003.
pre-wired for installation.
Mennekes Name:Receptacle strip 96703
Product Name:Receptacle strip
Part No.:96703.
Fitted with:2 CEE 16A, 5p, 400V
1 SCHUKO? 16A, 230V.
Connection/feeder cable:for 1 cable up to 5 x 10mm2.
Enclosure size:410 x 97 mm (H x W).
Protection type: IP44.
pre-wired for installation.
enclosure grey RAL 7035.
enclosure and insert made of AMAPLAST.
hanging clip enclosed.
Product Name:Receptacle strip
Part No.:96703.
Fitted with:2 CEE 16A, 5p, 400V
1 SCHUKO? 16A, 230V.
Connection/feeder cable:for 1 cable up to 5 x 10mm2.
Enclosure size:410 x 97 mm (H x W).
Protection type: IP44.
pre-wired for installation.
enclosure grey RAL 7035.
enclosure and insert made of AMAPLAST.
hanging clip enclosed.
Mennekes Name:Receptacle strip 96704
Product Name:Receptacle strip
Part No.:96704.
Fitted with:2 CEE 16A, 5p, 400V
1 CEE 16A, 3p, 230V.
Connection/feeder cable:for 1 cable up to 5 x 10mm2.
Enclosure size:410 x 97 mm (H x W).
Protection type: IP44.
pre-wired for installation.
enclosure grey RAL 7035.
enclosure and insert made of AMAPLAST.
hanging clip enclosed.
Product Name:Receptacle strip
Part No.:96704.
Fitted with:2 CEE 16A, 5p, 400V
1 CEE 16A, 3p, 230V.
Connection/feeder cable:for 1 cable up to 5 x 10mm2.
Enclosure size:410 x 97 mm (H x W).
Protection type: IP44.
pre-wired for installation.
enclosure grey RAL 7035.
enclosure and insert made of AMAPLAST.
hanging clip enclosed.
Proface Touch Screen(Compact) AGP4107W1D
Product Name: Touch Screen(Compact).
Model: AGP4106G1D
Graphic Display Resolution: 20*80 pixels.
Display Type and Size: STN Monochrome LCD(3.4").
SD Card: 1.
Serial Ports(COM1): RS485(ISOLATED).
Ethernet: N/A.
Contrast Adjustment: 8 levels of adjustment.
Backlight: Led(G1-Green/Red/W1-White/Red)
Brightness Adjustment: 16 levels of adjustment.
Touch Screen: Resistive Film (analog).
Display Colors: G1 Models - Green/orange/red(16 shades) /w1 models -whilte/pink/red(16 shades).
input voltage: 24 VDC.
Product Name: Touch Screen(Compact).
Model: AGP4106G1D
Graphic Display Resolution: 20*80 pixels.
Display Type and Size: STN Monochrome LCD(3.4").
SD Card: 1.
Serial Ports(COM1): RS485(ISOLATED).
Ethernet: N/A.
Contrast Adjustment: 8 levels of adjustment.
Backlight: Led(G1-Green/Red/W1-White/Red)
Brightness Adjustment: 16 levels of adjustment.
Touch Screen: Resistive Film (analog).
Display Colors: G1 Models - Green/orange/red(16 shades) /w1 models -whilte/pink/red(16 shades).
input voltage: 24 VDC.
Mennekes Connector PowerTOP Xtra 14102
Product Name:Connector PowerTOP? Xtra
Part No.:14102.
Ampere:63A.
Poles:3p
Voltage:230V.
Earth position:6h.
Hertz 50-60Hz.
Connection technology:screw terminals., SoftCONTACT.
Contact:highly heat resistant contact carrier.
Protection type IP44.
screw terminals.
with rubberised grip area.
frame terminals.
with SoftCONTACT.
with highly heat resistant contact carrier.
cable gland and sealing.
strain relief and protection against kinking.
enclosure with thread lock.
two safety slides.
products with pilot contact: part no. + index P.
Product Name:Connector PowerTOP? Xtra
Part No.:14102.
Ampere:63A.
Poles:3p
Voltage:230V.
Earth position:6h.
Hertz 50-60Hz.
Connection technology:screw terminals., SoftCONTACT.
Contact:highly heat resistant contact carrier.
Protection type IP44.
screw terminals.
with rubberised grip area.
frame terminals.
with SoftCONTACT.
with highly heat resistant contact carrier.
cable gland and sealing.
strain relief and protection against kinking.
enclosure with thread lock.
two safety slides.
products with pilot contact: part no. + index P.
Mennekes Cepex wall mounted receptacle 4108
Product Name:Cepex wall mounted receptacle
Part No.:4108.
Ampere:32A.
Poles:4p.
Voltage:400V.
Earth position: 6h.
Hertz 50-60Hz.
Protection type IP44.
screw terminals.
cable entry: 1 x M 25 with cable gland at top, 1 x M 25 to be cut out at the bottom, 1 x M 20 to be cut out at the back side, for cables 7 up to 13 mm ?.
meeting DIN 18032 standards for ball rebound.
Product Name:Cepex wall mounted receptacle
Part No.:4108.
Ampere:32A.
Poles:4p.
Voltage:400V.
Earth position: 6h.
Hertz 50-60Hz.
Protection type IP44.
screw terminals.
cable entry: 1 x M 25 with cable gland at top, 1 x M 25 to be cut out at the bottom, 1 x M 20 to be cut out at the back side, for cables 7 up to 13 mm ?.
meeting DIN 18032 standards for ball rebound.
Mennekes Cepex wall mounted receptacle 4104
Product Name:Cepex wall mounted receptacle
Part No.:4104.
Ampere:16A.
Poles:4p.
Voltage:500V.
Earth position: 7h.
Hertz 50-60Hz.
Protection type IP44.
screw terminals.
cable entry: 1 x M 25 with cable gland at top, 1 x M 25 to be cut out at the bottom, 1 x M 20 to be cut out at the back side, for cables 7 up to 13 mm ?.
meeting DIN 18032 standards for ball rebound.
Product Name:Cepex wall mounted receptacle
Part No.:4104.
Ampere:16A.
Poles:4p.
Voltage:500V.
Earth position: 7h.
Hertz 50-60Hz.
Protection type IP44.
screw terminals.
cable entry: 1 x M 25 with cable gland at top, 1 x M 25 to be cut out at the bottom, 1 x M 20 to be cut out at the back side, for cables 7 up to 13 mm ?.
meeting DIN 18032 standards for ball rebound.
Mennekes Cepex wall mounted receptacle 4106
Product Name:Cepex wall mounted receptacle
Part No.:4106.
Ampere:32A.
Poles:3p.
Voltage:110V.
Earth position 4h.
Hertz 50-60Hz.
Protection type IP44.
screw terminals.
cable entry: 1 x M 25 with cable gland at top, 1 x M 25 to be cut out at the bottom, 1 x M 20 to be cut out at the back side, for cables 7 up to 13 mm ?.
meeting DIN 18032 standards for ball rebound.
Product Name:Cepex wall mounted receptacle
Part No.:4106.
Ampere:32A.
Poles:3p.
Voltage:110V.
Earth position 4h.
Hertz 50-60Hz.
Protection type IP44.
screw terminals.
cable entry: 1 x M 25 with cable gland at top, 1 x M 25 to be cut out at the bottom, 1 x M 20 to be cut out at the back side, for cables 7 up to 13 mm ?.
meeting DIN 18032 standards for ball rebound.
Mennekes Cepex wall mounted receptacle 4107
Product Name:Cepex wall mounted receptacle
Part No.:4107.
Ampere:32A.
Poles:3p.
Voltage:230V.
Earth position: 6h.
Hertz 50-60Hz.
Protection type IP44.
screw terminals.
cable entry: 1 x M 25 with cable gland at top, 1 x M 25 to be cut out at the bottom, 1 x M 20 to be cut out at the back side, for cables 7 up to 13 mm ?.
meeting DIN 18032 standards for ball rebound.
Product Name:Cepex wall mounted receptacle
Part No.:4107.
Ampere:32A.
Poles:3p.
Voltage:230V.
Earth position: 6h.
Hertz 50-60Hz.
Protection type IP44.
screw terminals.
cable entry: 1 x M 25 with cable gland at top, 1 x M 25 to be cut out at the bottom, 1 x M 20 to be cut out at the back side, for cables 7 up to 13 mm ?.
meeting DIN 18032 standards for ball rebound.
Mennekes Cepex wall mounted receptacle 4105
Product Name:Cepex wall mounted receptacle
Part No.:4105.
Ampere:16A.
Poles:5p.
Voltage:400V.
Earth position: 6h.
Hertz 50-60Hz.
Protection type IP44.
screw terminals.
cable entry: 1 x M 25 with cable gland at top, 1 x M 25 to be cut out at the bottom, 1 x M 20 to be cut out at the back side, for cables 7 up to 13 mm ?.
meeting DIN 18032 standards for ball rebound.
Product Name:Cepex wall mounted receptacle
Part No.:4105.
Ampere:16A.
Poles:5p.
Voltage:400V.
Earth position: 6h.
Hertz 50-60Hz.
Protection type IP44.
screw terminals.
cable entry: 1 x M 25 with cable gland at top, 1 x M 25 to be cut out at the bottom, 1 x M 20 to be cut out at the back side, for cables 7 up to 13 mm ?.
meeting DIN 18032 standards for ball rebound.