Mitsubishi Servo Motor HC-SFS153

Mitsubishi GT15 Touch screen GT1555-QTBD

Mitsubishi CF card unit GT15-CFCD

Mitsubishi RS-422 cable GT09-C100R4-6C

Mitsubishi RS-232 cable GT09-C30R2-25P

Proface Touch Screen(Rear Mount) PFXGP4401TADRF0C
Product Name: Touch Screen(Rear Mount).
Model: PFXGP4401TADRF0C.
Backlight: White LED.
Display Type and Size: TFT Color LCD(7.5").
SD Card: 1.
Serial Ports(COM1): RS-232C.
Serial Ports (COM2): RS-422/485.
Ethernet: 1.
Touch Screen: Resistive Film (analog).
Programming Memory: 16mb flash EPROM.
Input Voltage: 24 VDC.
Display Colors: 65, 536 Colors(no blink) / 16, 384 Colors(blink).
Display Area: W 153.7 x H 115.8 mm [W 6.05 x H 4.56 in].
Graphic Display Resolution: 640*480 pixels(VGA).
Product is conformal coated.

ABB Inverter ACS550-01-031A-4
Product Name: Inverter.
Model: ACS550-01-031A-4.
Frame size: R3.
Wall-mounted units.
Typical motor power in 400 V at normal use: 15kw.
Typical motor power in 460 V at normal use: 20hp.
Continuous rms current. 10% overload is allowed for one minute in ten minutes: 31A.
Typical motor power in 400 V at heavy-duty use: 11KW.
Typical motor power in 460 V at heavy-duty use: 15HP.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 23A.
3-phase supply voltage 380 to 480 V.

ABB Inverter ACS355-03X-15A6-4
Product Name: Inverter.
Model: ACS355-03X-15A6-4.
This code states the factory installed SW variants to the drive.
Typical motor power in 400 V at normal use: 7.5kw.
Typical motor power in 460 V at normal use: 10.0hp.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 15.6A.
Frame size: R3.
Current rating represents the rated continuous drive output current inside the drive specification.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
3-phase AC supply, 380 to 480 V.

ABB Inverter ACS800-01-0205-5
Product Name: Inverter.
Model: ACS800-01-0205-5.
UN = 500 V (Range 380 to 500 V). The power ratings are valid at nominal voltage 500 V.
Rated current available continuously without overloadability at 40 °C: 260A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 326A.
Typical motor power in no-overload use: 160KW
Frame size: R6.
Typical motor power in light-overload use: 160Kw.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 215A.
Typical motor power in heavy-duty use: 132KW.
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 254A.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.

ABB Inverter ACS800-01-0070-7

ABB Inverter ACS550-01-195A-4
Product Name: Inverter.
Model: ACS550-01-195A-4.
3-phase supply voltage 380 to 480 V.
Wall-mounted units.
Typical motor power in 400 V at normal use: 110kw.
Frame size: R6.
Continuous rms current. 10% overload is allowed for one minute in ten minutes: 205A.
Typical motor power in 400 V at heavy-duty use: 90KW.
Typical motor power in 460 V at heavy-duty use: 125HP.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 162A.
Typical motor power in 460 V at normal use: 150hp.

Proface HMI GP2500-LG41-24V
Product Name: HMI(Progammable operator interfaces).
Model: GP2500-SC41-24V.
Type: 10.4-inch 640 × 480 Monochrome LCD.
Display Colors: Black and White (2 Shades)/ Black and White (8 Shades)(software control).
Backlight: CCFL (Service life: 50, 000 hrs. at 24hr. operation).
Resolution: 640 × 480 pixels.
Nominal Display Area (mm): 211.2(W) × 158.4(H).
Data Backup Memory: 128KB - uses lithium battery.
Contrast Control: 8 levels of adjustment available via touch panel.
Font Sizes: Width can be expanded 1 to 8 times.Height can be expanded 1/2*3, 1 to 8 times.
Rated Voltage: DC24V.
Application Memory: FLASH EPROM 4MB.
Brightness Control: 4 levels of adjustment available via touch panel.