Home >> Products >> 21
OMRON CPU C200HS-CPU33-E
C200HS-CPU33-E CPU
High-Performance CIM Version, Built-in RS-232C Port

The C200HS-CPU31-E and C200HS-CPU33-E controller offers the same basic
functionality as the C200HS-CPU01-E/CPU03 controllers. This CPU may be used in
either SYSMAC NET and/or SYSMAC LINK communication systems. The built-in
RS-232C port supports the same communications as the C200HS-CPU21/CPU23.
OMRON CPU Backplane Power Supply C500-PS211
Model : C500-PS211.
24 VDC.
Output ratings: 7 A, 5 VDC.
OMRON Remote I/O Master Unit CV500-RT211
CV500-RT SYSMAC BUS Remote I/O Slave Unit (optical) CV500-RT211.
Light type.
Mitsubishi DC input module AX40
Model: AX40.
Input Ponits: 16 Points.
Rated input voltage: DC12V/DC24V.
Rated Input Current: 4mA about/10mA about.
Size: 250(H)×37.5(W)×121(D)mm.
Weight: 0.36kg.
ABB Inverter ACS800-01-0100-7
Product Name: Inverter.
Model: ACS800-01-0100-7.
Frame size: R6.
Rated current available continuously without overloadability at 40 °C: 93A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 124A.
Typical motor power in no-overload use: 90KW
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 86A.
Typical motor power in light-overload use: 75Kw.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 62A.
Typical motor power in heavy-duty use: 55KW.
UN = 690 V (Range 525 to 690 V). The power ratings are valid at nominal voltage 690 V.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
Mennekes Connector 75211
Product Name:Connector
Part No.75211.
Ampere :200A.
Poles:4P.
Voltage:400V.
Earth position:6 h.
Hertz:50-60 Hz.
Connection technology:Screw terminals.
Contact:standard.
Protection type:IP67.
screw terminals.
with cable gland.
seawater resistant products are available on request.
if required, pilot cables can be introduced separately into plugs/ enclosures, please add PK to the part number.
Mennekes AMAXX receptacle combination 940215
Product Name:AMAXX? receptacle combination
Part No.:940215.
Fitted with:1 CEE 32A, 5p, 400V
1 CEE 16A, 5p, 400V
2 swiss standard type 25, 16A, 5p, 400V
2 swiss standard type 23, 16A, 3p, 230V.
Fusing:1 RCD 63A, 4p, 0.03A
1 MCB 32A, 3p, C
1 MCB′s 16A, 3p, C
1 MCB′s 16A, 1p, C
Pre-fuse max.:63A.
InA:45A.
RDF:0.35.
Connection/feeder cable:for 2 cable up to 5 x 25mm2.
Enclosure size:520 x 225 mm (H x W).
Protection type IP44.
pre-wired for installation.
hinged to the side.
enclosure and insert made of AMAPLAST.
fusing behind a transparent cover.
Mennekes Wall mounted receptacle 1210
Product Name:Wall mounted receptacle.
Part No.:1210.
Ampere:32A.
Poles:5p.
Voltage:400V.
Earth position:6h.
Hertz:50-60 Hz.
Connection technology:screw terminals.
Contact:standard.
Protection type:IP67.
screw terminals.
four external fixing holes.
one cable entry at top and one blind cable entry (can be cut out) at bottom.
receptacles are designed for adding an auxiliary contact switch.
Mennekes Receptacle 21360
Product Name:Receptacles
Part No.:21360.
Ampere:32A.
Poles:5p.
Voltage:400V.
Earth position:6h.
Hertz50-60 Hz.
Connection technology:screw terminals.
Contact:standard.
Protection type:IP67.
screw terminals.
with highly heat resistant contact carrier.
nickel plated contacts.
with 4 external fixing holes.
one cable entry at top, one blind cable entry (can be cut out) at bottom.
811 Results 12/Page Page 24 of 68     [First Page] << Previous 20 21 22 23 24 25 26 27 28 29 Next >> [Last Page]