Mitsubishi Inverter FR-F740-S560K
Product Name: Inverter.
Model: FR-F740-S560K.
560 KW.
Rated voltage: Three-phase 380 to 500 V.
Applicable motor capacity: 500 kW.
Permissible AC voltage fluctuation: 323 to 528V 50Hz/60Hz.
Power supply capacity: 833 kVA
Cooling system: Forced air cooling.
Approx. mass: 370 Kg.

Mitsubishi Inverter FR-F740-30K
Product Name: Inverter.
Model: FR-F740-30K.
30KW.
Rated voltage: Three-phase 380 to 500 V.
Applicable motor capacity: 30 kW.
Permissible AC voltage fluctuation: 323 to 528V 50Hz/60Hz.
Power supply capacity: 52 kVA
Cooling system: Forced air cooling.
Approx. mass: 13 Kg.

Mitsubishi Inverter FR-F740-0.75K
Product Name: Inverter.
Model: FR-F740-0.75K.
0.75KW.
Rated voltage: Three-phase 380 to 500 V.
Applicable motor capacity: 0.75 kW.
Permissible AC voltage fluctuation: 323 to 528V 50Hz/60Hz.
Power supply capacity: 2.5 kVA
Cooling system: Self-cooling.
Approx. mass: 3.5 Kg.

ABB Inverter ACS800-01-0020-7
Product Name: Inverter.
Model: ACS800-01-0020-7.
UN = 690 V (Range 525 to 690 V). The power ratings are valid at nominal voltage 690 V.
Rated current available continuously without overloadability at 40 °C: 22A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 28A.
Typical motor power in no-overload use: 18.5KW
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 20A.
Typical motor power in light-overload use: 15Kw.
Frame size: R4.
Typical motor power in heavy-duty use: 11KW.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 15A.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.

OMRON Touch Screen NV3W-MG40

OMRON Touch Screen NV3W-MR40

OMRON Integrated Touch Screen Controller NSJ5-TQ11-G5D

OMRON Limit Switches WLD28-LDS

Mennekes Wall mounted receptacle 3028
Product Name:Wall mounted receptacle
Part No.:3028.
Ampere:16A.
Poles:4p.
Voltage:>50-500V.
Earth position:2h.
Hertz300-500 Hz.
Connection technology:screw terminals.
Contact:standard.
Protection type:IP44.
screw terminals.
internal fixing.
one cable entry at top, two blind cable entries (can be cut out) at bottom.
enclosure base can be turned 180°.
receptacles are designed for adding an auxiliary contact switch..

Mennekes Wall mounted receptacle 7128
Product Name:Wall mounted receptacle
Part No.:7128.
Ampere:16A.
Poles:3p.
Voltage:230V.
Earth position :6h.
Hertz50-60 Hz.
Connection technology:screw terminals.
Contact: standard.
Protection type:IP67.
screw terminals.
with DIN rail, optional fitting of Neozed, Diazed, circuit-breakers and RCD`s.

Mennekes Wall mounted receptacle 7283
Product Name:Wall mounted receptacle
Part No.:7283.
Ampere:16A.
Poles:3p.
Voltage:230V.
Earth position :6h.
Hertz50-60 Hz.
Connection technology:screw terminals.
Contact: nickel plated contacts, highly heat resistant contact carrier.
Protection type IP67.
screw terminals.
highly resistant to chemicals
highly heat resistant contact carrier.
nickel plated contacts.
switched.
mechanical DUO-interlock.
receptacles can be padlocked.

Mennekes Wall mounted receptacle 7286
Product Name:Wall mounted receptacle
Part No.:7286.
Ampere:32A.
Poles:3p.
Voltage:230V.
Earth position :6h.
Hertz50-60 Hz.
Connection technology:screw terminals.
Contact: nickel plated contacts, highly heat resistant contact carrier.
Protection type IP67.
screw terminals.
highly resistant to chemicals.
highly heat resistant contact carrier.
nickel plated contacts.
switched.
mechanical DUO-interlock.
receptacles can be padlocked.