Mitsubishi Temperature input Module A1S62RD4N
Product: Temperature input Module.
Model: A1S62RD4N.
Outline: 2 channels, 4-wire type platinum RTD (Pt100 [JIS C1604-1997, IEC 751-am2, JIS C1604-1989, DIN 43760-1980], JPt100 [JIS C1604-1981]), conversion speed: 40 ms/channel, 20-point terminal block.
Product: Temperature input Module.
Model: A1S62RD4N.
Outline: 2 channels, 4-wire type platinum RTD (Pt100 [JIS C1604-1997, IEC 751-am2, JIS C1604-1989, DIN 43760-1980], JPt100 [JIS C1604-1981]), conversion speed: 40 ms/channel, 20-point terminal block.
ABB Inverter ACS800-01-0011-3
Product Name: Inverter.
Model: ACS800-01-0011-3.
UN = 400 V (Range 380 to 415 V). The power ratings are valid at nominal voltage 400 V.
Rated current available continuously without overloadability at 40 °C: 19A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 24A.
Typical motor power in no-overload use: 7.5KW
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 18A.
Typical motor power in light-overload use: 7.5Kw.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 14A.
Typical motor power in heavy-duty use: 5.5KW.
Frame size: R3.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
Product Name: Inverter.
Model: ACS800-01-0011-3.
UN = 400 V (Range 380 to 415 V). The power ratings are valid at nominal voltage 400 V.
Rated current available continuously without overloadability at 40 °C: 19A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 24A.
Typical motor power in no-overload use: 7.5KW
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 18A.
Typical motor power in light-overload use: 7.5Kw.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 14A.
Typical motor power in heavy-duty use: 5.5KW.
Frame size: R3.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
ABB Inverter ACS800-01-0016-5
Product Name: Inverter.
Model: ACS800-01-0016-5.
UN = 500 V (Range 380 to 500 V). The power ratings are valid at nominal voltage 500 V.
Rated current available continuously without overloadability at 40 °C: 19A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 24A.
Frame size: R3.
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 18A.
Typical motor power in light-overload use: 11Kw.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 13A.
Typical motor power in heavy-duty use: 7.5KW.
Typical motor power in no-overload use: 11KW
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
Product Name: Inverter.
Model: ACS800-01-0016-5.
UN = 500 V (Range 380 to 500 V). The power ratings are valid at nominal voltage 500 V.
Rated current available continuously without overloadability at 40 °C: 19A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 24A.
Frame size: R3.
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 18A.
Typical motor power in light-overload use: 11Kw.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 13A.
Typical motor power in heavy-duty use: 7.5KW.
Typical motor power in no-overload use: 11KW
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
Mennekes Wall mounted inlet 1972
Product Name:Wall mounted inlet
Part No.1972.
Ampere :32A.
Poles:2P.
Voltage:20-25，40-50V.
Hertz:(DC) Hz.
Earth position:12 h.
Connection technology:Screw terminals.
Contact:standard.
Protection type:IP44.
screw terminals.
external fixing.
one cable entry at top and one blind cable entry (can be cut out) at the back side.
Product Name:Wall mounted inlet
Part No.1972.
Ampere :32A.
Poles:2P.
Voltage:20-25，40-50V.
Hertz:(DC) Hz.
Earth position:12 h.
Connection technology:Screw terminals.
Contact:standard.
Protection type:IP44.
screw terminals.
external fixing.
one cable entry at top and one blind cable entry (can be cut out) at the back side.
Mennekes Wall mounted inlet 1955
Product Name:Wall mounted inlet
Part No.1955.
Ampere :16A.
Poles:2P.
Voltage:20-25V.
Hertz:50-60 Hz.
Earth position:0 h.
Connection technology:Screw terminals.
Contact:standard.
Protection type:IP44.
screw terminals.
external fixing.
one cable entry at top and one blind cable entry (can be cut out) at the back side.
Product Name:Wall mounted inlet
Part No.1955.
Ampere :16A.
Poles:2P.
Voltage:20-25V.
Hertz:50-60 Hz.
Earth position:0 h.
Connection technology:Screw terminals.
Contact:standard.
Protection type:IP44.
screw terminals.
external fixing.
one cable entry at top and one blind cable entry (can be cut out) at the back side.
Mennekes Wall mounted inlet 1974
Product Name:Wall mounted inlet
Part No.1974.
Ampere :32A.
Poles:2P.
Voltage:40-50V.
Hertz:50-60 Hz.
Earth position:12 h.
Connection technology:Screw terminals.
Contact:standard.
Protection type:IP44.
screw terminals.
external fixing.
one cable entry at top and one blind cable entry (can be cut out) at the back side.
Product Name:Wall mounted inlet
Part No.1974.
Ampere :32A.
Poles:2P.
Voltage:40-50V.
Hertz:50-60 Hz.
Earth position:12 h.
Connection technology:Screw terminals.
Contact:standard.
Protection type:IP44.
screw terminals.
external fixing.
one cable entry at top and one blind cable entry (can be cut out) at the back side.
Mennekes Wall mounted inlet 1980
Product Name:Wall mounted inlet
Part No.1980.
Ampere :32A.
Poles:3P.
Voltage:40-50V.
Hertz:50-60 Hz.
Earth position:12 h.
Connection technology:Screw terminals.
Contact:standard.
Protection type:IP44.
screw terminals.
external fixing.
one cable entry at top and one blind cable entry (can be cut out) at the back side.
Product Name:Wall mounted inlet
Part No.1980.
Ampere :32A.
Poles:3P.
Voltage:40-50V.
Hertz:50-60 Hz.
Earth position:12 h.
Connection technology:Screw terminals.
Contact:standard.
Protection type:IP44.
screw terminals.
external fixing.
one cable entry at top and one blind cable entry (can be cut out) at the back side.
Mennekes Wall mounted inlet 1965
Product Name:Wall mounted inlet
Part No.1965.
Ampere :16A.
Poles:3P.
Voltage:20-25，40-50V.
Hertz:100-200 Hz.
Earth position:4 h.
Connection technology:Screw terminals.
Contact:standard.
Protection type:IP44.
screw terminals.
external fixing.
one cable entry at top and one blind cable entry (can be cut out) at the back side.
Product Name:Wall mounted inlet
Part No.1965.
Ampere :16A.
Poles:3P.
Voltage:20-25，40-50V.
Hertz:100-200 Hz.
Earth position:4 h.
Connection technology:Screw terminals.
Contact:standard.
Protection type:IP44.
screw terminals.
external fixing.
one cable entry at top and one blind cable entry (can be cut out) at the back side.