Mitsubishi INVerter FR-E740-0.4K
Product Name: INVerter.
Model: FR-E740-0.4K.
0.4 KW.
Rated voltage: Three-phase 380 to 480V.
Applicable motor capacity: 0.4 kW.
Rated input AC (DC) voltage/frequency: Three-phase 380 to 480V 50Hz/60Hz (283 to 339VDC).
Protective structure: Enclosed type (IP20). IP40 for totally enclosed structure series.
Cooling system: Self-cooling.
Approx. mass: 1.4 Kg.
Product Name: INVerter.
Model: FR-E740-0.4K.
0.4 KW.
Rated voltage: Three-phase 380 to 480V.
Applicable motor capacity: 0.4 kW.
Rated input AC (DC) voltage/frequency: Three-phase 380 to 480V 50Hz/60Hz (283 to 339VDC).
Protective structure: Enclosed type (IP20). IP40 for totally enclosed structure series.
Cooling system: Self-cooling.
Approx. mass: 1.4 Kg.
ABB INVerter ACS800-01-0255-5
Product Name: INVerter.
Model: ACS800-01-0255-5.
UN = 500 V (Range 380 to 500 V). The power ratings are valid at nominal voltage 500 V.
Rated current available continuously without overloadability at 40 °C: 290A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 351A.
Typical motor power in no-overload use: 200KW
Frame size: R6.
Typical motor power in light-overload use: 200Kw.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 234A.
Typical motor power in heavy-duty use: 160KW.
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 285A.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
Product Name: INVerter.
Model: ACS800-01-0255-5.
UN = 500 V (Range 380 to 500 V). The power ratings are valid at nominal voltage 500 V.
Rated current available continuously without overloadability at 40 °C: 290A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 351A.
Typical motor power in no-overload use: 200KW
Frame size: R6.
Typical motor power in light-overload use: 200Kw.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 234A.
Typical motor power in heavy-duty use: 160KW.
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 285A.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
ABB INVerter ACS355-03X-01A2-4
Product Name: INVerter.
Model: ACS355-03X-01A2-4.
3-phase AC supply, 380 to 480 V.
Typical motor power in 400 V at normal use: 0.37kw.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 1.2A.
Frame size: R0.
Current rating represents the rated continuous drive output current inside the drive specification.
Typical motor power in 460 V at normal use: 0.5hp.
This code states the factory installed SW variants to the drive.
Product Name: INVerter.
Model: ACS355-03X-01A2-4.
3-phase AC supply, 380 to 480 V.
Typical motor power in 400 V at normal use: 0.37kw.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 1.2A.
Frame size: R0.
Current rating represents the rated continuous drive output current inside the drive specification.
Typical motor power in 460 V at normal use: 0.5hp.
This code states the factory installed SW variants to the drive.
ABB INVerter ACS355-03X-07A3-4
Product Name: INVerter.
Model: ACS355-03X-07A3-4.
3-phase AC supply, 380 to 480 V.
Typical motor power in 400 V at normal use: 3.0kw.
Current rating represents the rated continuous drive output current inside the drive specification.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 7.3A.
Frame size: R1.
Typical motor power in 460 V at normal use: 3.0hp.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
This code states the factory installed SW variants to the drive.
Product Name: INVerter.
Model: ACS355-03X-07A3-4.
3-phase AC supply, 380 to 480 V.
Typical motor power in 400 V at normal use: 3.0kw.
Current rating represents the rated continuous drive output current inside the drive specification.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 7.3A.
Frame size: R1.
Typical motor power in 460 V at normal use: 3.0hp.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
This code states the factory installed SW variants to the drive.
Mitsubishi INVerter FR-E720-1.5K
Product Name: INVerter.
Model: FR-E720-1.5K.
1.5 KW.
Rated voltage: Three-phase 200 to 240V.
Applicable motor capacity: 1.5 kW.
Rated input AC (DC) voltage/frequency: Three-phase 200 to 240V 50Hz/60Hz (283 to 339VDC).
Protective structure: Enclosed type (IP20). IP40 for totally enclosed structure series.
Cooling system: Forced air cooling.
Approx. mass: 1.4 Kg.
Product Name: INVerter.
Model: FR-E720-1.5K.
1.5 KW.
Rated voltage: Three-phase 200 to 240V.
Applicable motor capacity: 1.5 kW.
Rated input AC (DC) voltage/frequency: Three-phase 200 to 240V 50Hz/60Hz (283 to 339VDC).
Protective structure: Enclosed type (IP20). IP40 for totally enclosed structure series.
Cooling system: Forced air cooling.
Approx. mass: 1.4 Kg.
Proface CC-Link I/F Unit(For the Intelligent Device Station) GP077-CL11
for GP2000 Series * Bus CoNVersion Unit (PSL-CONV00) is required.
for GP2000 Series * Bus CoNVersion Unit (PSL-CONV00) is required.
Mitsubishi Digital - analog coNVersion unit A68DAI
Model: A68DAI.
DESCRIPTION: D/A CONVERTER UNIT : 8 CHANNELS.
Input (resolution): Output 0 ~ 4000, 0 ~ 8000, 0 ~ 12000: DC0 ~ 20mA.
Conversion rate: 40ms / 8 Channel.
Size: 250(H)×37.5(W)×131(D)mm.
Weight: 0.65kg.
Model: A68DAI.
DESCRIPTION: D/A CONVERTER UNIT : 8 CHANNELS.
Input (resolution): Output 0 ~ 4000, 0 ~ 8000, 0 ~ 12000: DC0 ~ 20mA.
Conversion rate: 40ms / 8 Channel.
Size: 250(H)×37.5(W)×131(D)mm.
Weight: 0.65kg.
886 Results 12/Page Page 15 of 74 [First Page] << Previous 11 12 13 14 15 16 17 18 19 20 Next >> [Last Page]