Mitsubishi Inverter FR-A840-06830-2-60
Product Name: Inverter.
Model: FR-A840-06830-2-60.
280KW.
Rated voltage: Three-phase 380 to 500 V.
Applicable motor capacity(SLD): 355 kW.
Rated input AC voltage/frequency: Three-phase 380 to 500 V 50 Hz/60 Hz.
Cooling system: Forced air cooling.
Approx. mass: 166 Kg.
Product Name: Inverter.
Model: FR-A840-06830-2-60.
280KW.
Rated voltage: Three-phase 380 to 500 V.
Applicable motor capacity(SLD): 355 kW.
Rated input AC voltage/frequency: Three-phase 380 to 500 V 50 Hz/60 Hz.
Cooling system: Forced air cooling.
Approx. mass: 166 Kg.
ABB Inverter ACS355-01X-06A7-2
Product Name: Inverter.
Model: ACS355-01X-06A7-2.
1-phase AC supply, 200 to 240 V.
Typical motor power in 400 V at normal use: 1.1kw.
This code states the factory installed SW variants to the drive.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 6.7A.
Frame size: R1.
Current rating represents the rated continuous drive output current inside the drive specification.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
Typical motor power in 460 V at normal use: 1.5hp.
Product Name: Inverter.
Model: ACS355-01X-06A7-2.
1-phase AC supply, 200 to 240 V.
Typical motor power in 400 V at normal use: 1.1kw.
This code states the factory installed SW variants to the drive.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 6.7A.
Frame size: R1.
Current rating represents the rated continuous drive output current inside the drive specification.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
Typical motor power in 460 V at normal use: 1.5hp.
Proface HMI AGP3650-T1-AF-M
Product Name: HMI(Multi-Media).
Model: AGP3560-T1-AF-M.
Display Type and Size: TFT Color LCD(12.1in).
Input Voltage: 100-240 VAC.
Display Colors: 65, 536 Colors(no blink)/16, 384 Colors(blink).
Display Area: W248.0 x H186.5 mm [W9.76 x H7.34 in].
Touch Screen: Resistive Film(analog).
Backlight: CCFL.
CF Card: 1 slot/Type II.
Serial Ports(COM1): RS-232C/422/485.
Serial Ports(COM2): RS-422/485.
Ethernet: Yes.
Programming Memory: 10mb flash EPROM.
Graphic Display Resolution: 800*600 pixels(SVGA).
suffix denotes product is conformal coated.
Product Name: HMI(Multi-Media).
Model: AGP3560-T1-AF-M.
Display Type and Size: TFT Color LCD(12.1in).
Input Voltage: 100-240 VAC.
Display Colors: 65, 536 Colors(no blink)/16, 384 Colors(blink).
Display Area: W248.0 x H186.5 mm [W9.76 x H7.34 in].
Touch Screen: Resistive Film(analog).
Backlight: CCFL.
CF Card: 1 slot/Type II.
Serial Ports(COM1): RS-232C/422/485.
Serial Ports(COM2): RS-422/485.
Ethernet: Yes.
Programming Memory: 10mb flash EPROM.
Graphic Display Resolution: 800*600 pixels(SVGA).
suffix denotes product is conformal coated.
Proface HMI AGP3500-T1-D24-FN1M
Product Name: HMI(W/FlexNetwork).
Model: AGP3500-T1-D24-FN1M.
Display Type and Size: TFT Color LCD(10.4in).
Graphic Display Resolution: 640*480 pixels(VGA).
Input Voltage: 24 VDC.
Display Area: W211.2 x H158.4 mm [W8.31 x H6.24 in].
CF Card: 1 slot, type II.
Serial Ports (COM1): RS-232C/422/485.
Touch Screen: Resistive Film(analog).
Backlight: CCFL.
Programming Memory: 8mb flash EPROM.
Display Colors: 65536 COLRS(NO Blink)/16384 colors(blink).
Ethernet: yes.
Product Name: HMI(W/FlexNetwork).
Model: AGP3500-T1-D24-FN1M.
Display Type and Size: TFT Color LCD(10.4in).
Graphic Display Resolution: 640*480 pixels(VGA).
Input Voltage: 24 VDC.
Display Area: W211.2 x H158.4 mm [W8.31 x H6.24 in].
CF Card: 1 slot, type II.
Serial Ports (COM1): RS-232C/422/485.
Touch Screen: Resistive Film(analog).
Backlight: CCFL.
Programming Memory: 8mb flash EPROM.
Display Colors: 65536 COLRS(NO Blink)/16384 colors(blink).
Ethernet: yes.
ABB Inverter ACS550-02-486A-4
Product Name: Inverter.
Model: ACS550-01-486A-4.
3-phase supply voltage 380 to 480 V.
Free-standing units.
Frame size: R8.
Typical motor power in 460 V at normal use: 400hp.
Continuous rms current. 10% overload is allowed for one minute in ten minutes: 486A.
Typical motor power in 400 V at heavy-duty use: 200KW.
Typical motor power in 460 V at heavy-duty use: 350HP.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 414A.
Typical motor power in 400 V at normal use: 250kw.
Product Name: Inverter.
Model: ACS550-01-486A-4.
3-phase supply voltage 380 to 480 V.
Free-standing units.
Frame size: R8.
Typical motor power in 460 V at normal use: 400hp.
Continuous rms current. 10% overload is allowed for one minute in ten minutes: 486A.
Typical motor power in 400 V at heavy-duty use: 200KW.
Typical motor power in 460 V at heavy-duty use: 350HP.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 414A.
Typical motor power in 400 V at normal use: 250kw.
ABB Inverter ACS800-01-0205-3
Product Name: Inverter.
Model: ACS800-01-0205-3.
UN = 400 V (Range 380 to 415 V). The power ratings are valid at nominal voltage 400 V.
Rated current available continuously without overloadability at 40 °C: 290A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 351A.
Typical motor power in no-overload use: 160KW
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
Typical motor power in light-overload use: 160Kw.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 234A.
Typical motor power in heavy-duty use: 132KW.
Frame size: R6.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 285A.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
Product Name: Inverter.
Model: ACS800-01-0205-3.
UN = 400 V (Range 380 to 415 V). The power ratings are valid at nominal voltage 400 V.
Rated current available continuously without overloadability at 40 °C: 290A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 351A.
Typical motor power in no-overload use: 160KW
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
Typical motor power in light-overload use: 160Kw.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 234A.
Typical motor power in heavy-duty use: 132KW.
Frame size: R6.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 285A.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
ABB Inverter ACS355-03X-08A8-4
Product Name: Inverter.
Model: ACS355-03X-08A8-4.
3-phase AC supply, 380 to 480 V.
This code states the factory installed SW variants to the drive.
Typical motor power in 460 V at normal use: 5.0hp.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 8.8A.
Frame size: R1.
Current rating represents the rated continuous drive output current inside the drive specification.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
Typical motor power in 400 V at normal use: 4.0kw.
Product Name: Inverter.
Model: ACS355-03X-08A8-4.
3-phase AC supply, 380 to 480 V.
This code states the factory installed SW variants to the drive.
Typical motor power in 460 V at normal use: 5.0hp.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 8.8A.
Frame size: R1.
Current rating represents the rated continuous drive output current inside the drive specification.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
Typical motor power in 400 V at normal use: 4.0kw.
ABB Inverter ACS355-01X-07A5-2
Product Name: Inverter.
Model: ACS355-01X-07A5-2.
1-phase AC supply, 200 to 240 V.
This code states the factory installed SW variants to the drive.
Typical motor power in 460 V at normal use: 2.0hp.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 7.5A.
Frame size: R2.
Current rating represents the rated continuous drive output current inside the drive specification.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
Typical motor power in 400 V at normal use: 1.5kw.
Product Name: Inverter.
Model: ACS355-01X-07A5-2.
1-phase AC supply, 200 to 240 V.
This code states the factory installed SW variants to the drive.
Typical motor power in 460 V at normal use: 2.0hp.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 7.5A.
Frame size: R2.
Current rating represents the rated continuous drive output current inside the drive specification.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
Typical motor power in 400 V at normal use: 1.5kw.
404 Results 12/Page Page 15 of 34 [First Page] << Previous 11 12 13 14 15 16 17 18 19 20 Next >> [Last Page]