Proface HMI AGP3560-T1-AF-M
Product Name: HMI(Multi-Media).
Model: AGP3560-T1-AF-M.
Display Type and Size: TFT Color LCD(10.4in).
Graphic Display Resolution: 800*600 pixels(SVGA).
Display Colors: 65, 536 Colors(no blink)/16, 384 Colors(blink).
Display Area: W211.2 x H158.4 mm [W8.31 x H6.24 in].
Input Voltage: 100-240 VAC.
Backlight: CCFL.
CF Card: 1 slot/Type II.
Serial Ports(COM1): RS-232C/422/485.
Serial Ports(COM2): RS-422/485.
Ethernet: Yes.
Programming Memory: 10mb flash EPROM.
Touch Screen: Resistive Film(analog).
suffix denotes product is conformal coated.
Product Name: HMI(Multi-Media).
Model: AGP3560-T1-AF-M.
Display Type and Size: TFT Color LCD(10.4in).
Graphic Display Resolution: 800*600 pixels(SVGA).
Display Colors: 65, 536 Colors(no blink)/16, 384 Colors(blink).
Display Area: W211.2 x H158.4 mm [W8.31 x H6.24 in].
Input Voltage: 100-240 VAC.
Backlight: CCFL.
CF Card: 1 slot/Type II.
Serial Ports(COM1): RS-232C/422/485.
Serial Ports(COM2): RS-422/485.
Ethernet: Yes.
Programming Memory: 10mb flash EPROM.
Touch Screen: Resistive Film(analog).
suffix denotes product is conformal coated.
ABB Inverter ACS355-03X-38A0-4
Product Name: Inverter.
Model: ACS355-03X-38A0-4.
3-phase AC supply, 380 to 480 V.
Typical motor power in 400 V at normal use: 18.5kw.
Current rating represents the rated continuous drive output current inside the drive specification.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 38.0A.
Frame size: R4.
Typical motor power in 460 V at normal use: 25.0hp.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
This code states the factory installed SW variants to the drive.
Product Name: Inverter.
Model: ACS355-03X-38A0-4.
3-phase AC supply, 380 to 480 V.
Typical motor power in 400 V at normal use: 18.5kw.
Current rating represents the rated continuous drive output current inside the drive specification.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 38.0A.
Frame size: R4.
Typical motor power in 460 V at normal use: 25.0hp.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
This code states the factory installed SW variants to the drive.
ABB Inverter ACS800-01-0205-3
Product Name: Inverter.
Model: ACS800-01-0205-3.
UN = 400 V (Range 380 to 415 V). The power ratings are valid at nominal voltage 400 V.
Rated current available continuously without overloadability at 40 °C: 290A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 351A.
Typical motor power in no-overload use: 160KW
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
Typical motor power in light-overload use: 160Kw.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 234A.
Typical motor power in heavy-duty use: 132KW.
Frame size: R6.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 285A.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
Product Name: Inverter.
Model: ACS800-01-0205-3.
UN = 400 V (Range 380 to 415 V). The power ratings are valid at nominal voltage 400 V.
Rated current available continuously without overloadability at 40 °C: 290A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 351A.
Typical motor power in no-overload use: 160KW
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
Typical motor power in light-overload use: 160Kw.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 234A.
Typical motor power in heavy-duty use: 132KW.
Frame size: R6.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 285A.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
Mennekes Power post 84335
Product Name:Power post
Part No.:84335.
Fitted with:1 CEE 16A, 5p, 400V
2 SCHUKO? 16A, 230V .
Fusing:1 MCB 16A, 3p, C
1 MCB 16A, 1p, B.
Pre-fuse max.:63A.
InA:22A.
RDF:0.7.
Connection/feeder cable:for 1 cable up to 5 x6mm2.
Enclosure size:1050 x 220 mm (H x ? inside).
Protection type: IP44.
from steel tube.
wall thickness 4.0 mm.
hot-dip galvanised.
powder-coated.
colour: red.
hinged supply aperture.
with safety lock.
dimensions (H x ?): 1050 x 220 mm (inside).
weight: approx. 45 kg.
aperture at bottom: (H x W) 50 x 40 mm.
fixing flange: ? 360 mm.
with 4 fixing holes 15.5 mm.
for fixing to an existing fundament.
Product Name:Power post
Part No.:84335.
Fitted with:1 CEE 16A, 5p, 400V
2 SCHUKO? 16A, 230V .
Fusing:1 MCB 16A, 3p, C
1 MCB 16A, 1p, B.
Pre-fuse max.:63A.
InA:22A.
RDF:0.7.
Connection/feeder cable:for 1 cable up to 5 x6mm2.
Enclosure size:1050 x 220 mm (H x ? inside).
Protection type: IP44.
from steel tube.
wall thickness 4.0 mm.
hot-dip galvanised.
powder-coated.
colour: red.
hinged supply aperture.
with safety lock.
dimensions (H x ?): 1050 x 220 mm (inside).
weight: approx. 45 kg.
aperture at bottom: (H x W) 50 x 40 mm.
fixing flange: ? 360 mm.
with 4 fixing holes 15.5 mm.
for fixing to an existing fundament.
Mennekes AMAXX receptacle combination 943510
Product Name:AMAXX? receptacle combination
Part No.:943510.
Fitted with:4 french/belg. standard 16A, 2p+E, 230V.
Fusing:1 RCD 40A, 4p, 0.03A
1 MCB 32A, 3p+N, C
1 MCB 16A, 3p+N, C
1 MCB 16A, 1p+N, C
1 off button.
Pre-fuse max:40A.
InA :38A.
RDF:0.45.
Connection/feeder cable:for 2 cable up to 5 x 25mm2.
Enclosure size:520 x 225 mm (H x W).
Protection type IP44.
pre-wired for installation.
hinged to the side.
enclosure and insert made of AMAPLAST.
fusing behind a transparent cover.
Product Name:AMAXX? receptacle combination
Part No.:943510.
Fitted with:4 french/belg. standard 16A, 2p+E, 230V.
Fusing:1 RCD 40A, 4p, 0.03A
1 MCB 32A, 3p+N, C
1 MCB 16A, 3p+N, C
1 MCB 16A, 1p+N, C
1 off button.
Pre-fuse max:40A.
InA :38A.
RDF:0.45.
Connection/feeder cable:for 2 cable up to 5 x 25mm2.
Enclosure size:520 x 225 mm (H x W).
Protection type IP44.
pre-wired for installation.
hinged to the side.
enclosure and insert made of AMAPLAST.
fusing behind a transparent cover.
Mennekes Name:Receptacle strip 88677
Product Name:Receptacle strip
Part No.:88677.
Fitted with:8 SCHUKO? 16A, 230V.
insert tilted through 30o.
Connection/feeder cable:for 1 cable up to 3 x 6mm2.
Enclosure size:410 x 97 mm (H x W).
Protection type: IP44.
pre-wired for installation.
enclosure grey RAL 7035.
enclosure and insert made of AMAPLAST.
hanging clip enclosed.
Product Name:Receptacle strip
Part No.:88677.
Fitted with:8 SCHUKO? 16A, 230V.
insert tilted through 30o.
Connection/feeder cable:for 1 cable up to 3 x 6mm2.
Enclosure size:410 x 97 mm (H x W).
Protection type: IP44.
pre-wired for installation.
enclosure grey RAL 7035.
enclosure and insert made of AMAPLAST.
hanging clip enclosed.
Mennekes Panel mounted inlet 835
Product Name:Panel mounted inlet
Part No.:835.
Ampere:63A.
Poles:3p
Voltage:110V.
Earth position:4h.
Hertz 50-60Hz.
Connection technology:screw terminals.
Contact:nickel plated contacts, highly heat resistant contact carrier.
Protection type IP67.
screw terminals.
with highly heat resistant contact carrier.
nickel plated contacts.
a retaining nose to hold the hinged lid of the connector must be provided by the customer in order to ensure satisfactory locking.
Product Name:Panel mounted inlet
Part No.:835.
Ampere:63A.
Poles:3p
Voltage:110V.
Earth position:4h.
Hertz 50-60Hz.
Connection technology:screw terminals.
Contact:nickel plated contacts, highly heat resistant contact carrier.
Protection type IP67.
screw terminals.
with highly heat resistant contact carrier.
nickel plated contacts.
a retaining nose to hold the hinged lid of the connector must be provided by the customer in order to ensure satisfactory locking.
Mennekes Wall mounted phase inverter inlet 3350
Product Name:Panel mounted phase inverter inlet
Part No.:3350.
Ampere:16A.
Poles:4p
Voltage:400V.
Earth position:6h.
Hertz 50-60Hz.
Connection technology:screw terminals.
Contact:standard.
Protection type IP44.
screw terminals.
with hinged lid.
Product Name:Panel mounted phase inverter inlet
Part No.:3350.
Ampere:16A.
Poles:4p
Voltage:400V.
Earth position:6h.
Hertz 50-60Hz.
Connection technology:screw terminals.
Contact:standard.
Protection type IP44.
screw terminals.
with hinged lid.
Mennekes Wall mounted phase inverter inlet 3356
Product Name:Panel mounted phase inverter inlet
Part No.:3356.
Ampere:32A.
Poles:4p
Voltage:400V.
Earth position:6h.
Hertz 50-60Hz.
Connection technology:screw terminals.
Contact:standard.
Protection type IP44.
screw terminals.
with hinged lid.
Product Name:Panel mounted phase inverter inlet
Part No.:3356.
Ampere:32A.
Poles:4p
Voltage:400V.
Earth position:6h.
Hertz 50-60Hz.
Connection technology:screw terminals.
Contact:standard.
Protection type IP44.
screw terminals.
with hinged lid.
Mennekes EverGUM receptacle combination 70571
Product Name:EverGUM receptacle combination
Part No.:70571.
Fitted with:6 french/belg. standard 16A, 2p+E, 230V.
Fusing:1 RCD 25A, 2p, 0.03A.
Connection/feeder cable:2 m H07RN-F3G2.5 mit NF-plug 16A, 2p+E, 400V.
Enclosure size:445 x 135 mm (H x W).
Protection type IP44.
solid rubber enclosure, signal yellow RAL 1003.
pre-wired for installation.
Product Name:EverGUM receptacle combination
Part No.:70571.
Fitted with:6 french/belg. standard 16A, 2p+E, 230V.
Fusing:1 RCD 25A, 2p, 0.03A.
Connection/feeder cable:2 m H07RN-F3G2.5 mit NF-plug 16A, 2p+E, 400V.
Enclosure size:445 x 135 mm (H x W).
Protection type IP44.
solid rubber enclosure, signal yellow RAL 1003.
pre-wired for installation.
ABB Inverter ACS355-03X-12A5-4
Product Name: Inverter.
Model: ACS355-03X-12A5-4.
3-phase AC supply, 380 to 480 V.
This code states the factory installed SW variants to the drive.
Typical motor power in 460 V at normal use: 7.5hp.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 12.5A.
Frame size: R3.
Current rating represents the rated continuous drive output current inside the drive specification.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
Typical motor power in 400 V at normal use: 5.5kw.
Product Name: Inverter.
Model: ACS355-03X-12A5-4.
3-phase AC supply, 380 to 480 V.
This code states the factory installed SW variants to the drive.
Typical motor power in 460 V at normal use: 7.5hp.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 12.5A.
Frame size: R3.
Current rating represents the rated continuous drive output current inside the drive specification.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
Typical motor power in 400 V at normal use: 5.5kw.
ABB Inverter ACS355-01X-06A7-2
Product Name: Inverter.
Model: ACS355-01X-06A7-2.
1-phase AC supply, 200 to 240 V.
Typical motor power in 400 V at normal use: 1.1kw.
This code states the factory installed SW variants to the drive.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 6.7A.
Frame size: R1.
Current rating represents the rated continuous drive output current inside the drive specification.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
Typical motor power in 460 V at normal use: 1.5hp.
Product Name: Inverter.
Model: ACS355-01X-06A7-2.
1-phase AC supply, 200 to 240 V.
Typical motor power in 400 V at normal use: 1.1kw.
This code states the factory installed SW variants to the drive.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 6.7A.
Frame size: R1.
Current rating represents the rated continuous drive output current inside the drive specification.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
Typical motor power in 460 V at normal use: 1.5hp.
404 Results 12/Page Page 13 of 34 [First Page] << Previous 9 10 11 12 13 14 15 16 17 18 Next >> [Last Page]