Mennekes EverGUM receptacle combination 70030
Product Name:EverGUM receptacle combination
Part No.:70030.
Fitted with:1 CEE 32A, 5p, 400V
2 SCHUKO? 16A, 230V.
Fusing:1 RCD 40A, 4p, 0.03A
2 MCB′s 16A, 1p, B.
Pre-fuse max:32A.
InA:32A.
RDF:0.75.
Connection/feeder cable:2 m H07RN-F5G4 with CEE-plug 32A, 5p, 400V.
Enclosure size:445 x 135 mm (H x W).
Protection type IP44.
solid rubber enclosure, signal yellow RAL 1003.
pre-wired for installation.
Product Name:EverGUM receptacle combination
Part No.:70030.
Fitted with:1 CEE 32A, 5p, 400V
2 SCHUKO? 16A, 230V.
Fusing:1 RCD 40A, 4p, 0.03A
2 MCB′s 16A, 1p, B.
Pre-fuse max:32A.
InA:32A.
RDF:0.75.
Connection/feeder cable:2 m H07RN-F5G4 with CEE-plug 32A, 5p, 400V.
Enclosure size:445 x 135 mm (H x W).
Protection type IP44.
solid rubber enclosure, signal yellow RAL 1003.
pre-wired for installation.
Mennekes Panel mounted receptacle 3507
Product Name:Panel mounted receptacle
Part No.:3507.
Ampere:63A.
Poles:5p.
Voltage:500V.
Earth position :7h.
Hertz 50-60Hz.
Connection technology:screw terminals., SoftCONTACT.
Contact: standrad.
Protection type IP67.
screw terminals.
SoftCONTACT.
20° inclination.
receptacles with pilot contact: part no. + index P.
Product Name:Panel mounted receptacle
Part No.:3507.
Ampere:63A.
Poles:5p.
Voltage:500V.
Earth position :7h.
Hertz 50-60Hz.
Connection technology:screw terminals., SoftCONTACT.
Contact: standrad.
Protection type IP67.
screw terminals.
SoftCONTACT.
20° inclination.
receptacles with pilot contact: part no. + index P.
Mennekes Name:Receptacle strip 95470
Product Name:Receptacle strip
Part No.:95470.
Fitted with:2 CEE 16A, 5p, 400V
1 SCHUKO? 16A, 230V.
Fusing:1 RCD 40A, 4p, 0.03A.
Connection/feeder cable:for 1 cable up to 5 x 10mm2.
Enclosure size:410 x 97 mm (H x W).
Protection type: IP44.
pre-wired for installation.
enclosure grey RAL 7035.
enclosure and insert made of AMAPLAST.
hanging clip enclosed.
Product Name:Receptacle strip
Part No.:95470.
Fitted with:2 CEE 16A, 5p, 400V
1 SCHUKO? 16A, 230V.
Fusing:1 RCD 40A, 4p, 0.03A.
Connection/feeder cable:for 1 cable up to 5 x 10mm2.
Enclosure size:410 x 97 mm (H x W).
Protection type: IP44.
pre-wired for installation.
enclosure grey RAL 7035.
enclosure and insert made of AMAPLAST.
hanging clip enclosed.
Mennekes Power post 84335
Product Name:Power post
Part No.:84335.
Fitted with:1 CEE 16A, 5p, 400V
2 SCHUKO? 16A, 230V .
Fusing:1 MCB 16A, 3p, C
1 MCB 16A, 1p, B.
Pre-fuse max.:63A.
InA:22A.
RDF:0.7.
Connection/feeder cable:for 1 cable up to 5 x6mm2.
Enclosure size:1050 x 220 mm (H x ? inside).
Protection type: IP44.
from steel tube.
wall thickness 4.0 mm.
hot-dip galvanised.
powder-coated.
colour: red.
hinged supply aperture.
with safety lock.
dimensions (H x ?): 1050 x 220 mm (inside).
weight: approx. 45 kg.
aperture at bottom: (H x W) 50 x 40 mm.
fixing flange: ? 360 mm.
with 4 fixing holes 15.5 mm.
for fixing to an existing fundament.
Product Name:Power post
Part No.:84335.
Fitted with:1 CEE 16A, 5p, 400V
2 SCHUKO? 16A, 230V .
Fusing:1 MCB 16A, 3p, C
1 MCB 16A, 1p, B.
Pre-fuse max.:63A.
InA:22A.
RDF:0.7.
Connection/feeder cable:for 1 cable up to 5 x6mm2.
Enclosure size:1050 x 220 mm (H x ? inside).
Protection type: IP44.
from steel tube.
wall thickness 4.0 mm.
hot-dip galvanised.
powder-coated.
colour: red.
hinged supply aperture.
with safety lock.
dimensions (H x ?): 1050 x 220 mm (inside).
weight: approx. 45 kg.
aperture at bottom: (H x W) 50 x 40 mm.
fixing flange: ? 360 mm.
with 4 fixing holes 15.5 mm.
for fixing to an existing fundament.
Mitsubishi Input module A0J2-E32A
Product: Input module.
Model: A0J2-E32A.
Outline: 32 points, 100 to 120 V AC, 10 mA, response time: 35 ms, 16 points/common, 36-point terminal block.
Product: Input module.
Model: A0J2-E32A.
Outline: 32 points, 100 to 120 V AC, 10 mA, response time: 35 ms, 16 points/common, 36-point terminal block.
Mitsubishi Main base A1S35B
Product: Main base.
Model: A1S35B.
Outline: 5 slots, power supply module required, for QnAS/AnS Series modules.
Product: Main base.
Model: A1S35B.
Outline: 5 slots, power supply module required, for QnAS/AnS Series modules.
Mitsubishi Inverter FR-F740-S355K
Product Name: Inverter.
Model: FR-F740-S355K.
355 KW.
Rated voltage: Three-phase 380 to 500 V.
Applicable motor capacity: 355 kW.
Permissible AC voltage fluctuation: 323 to 528V 50Hz/60Hz.
Power supply capacity: 520 kVA
Cooling system: Forced air cooling.
Approx. mass: 260 Kg.
Product Name: Inverter.
Model: FR-F740-S355K.
355 KW.
Rated voltage: Three-phase 380 to 500 V.
Applicable motor capacity: 355 kW.
Permissible AC voltage fluctuation: 323 to 528V 50Hz/60Hz.
Power supply capacity: 520 kVA
Cooling system: Forced air cooling.
Approx. mass: 260 Kg.
ABB Inverter ACS355-03X-38A0-4
Product Name: Inverter.
Model: ACS355-03X-38A0-4.
3-phase AC supply, 380 to 480 V.
Typical motor power in 400 V at normal use: 18.5kw.
Current rating represents the rated continuous drive output current inside the drive specification.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 38.0A.
Frame size: R4.
Typical motor power in 460 V at normal use: 25.0hp.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
This code states the factory installed SW variants to the drive.
Product Name: Inverter.
Model: ACS355-03X-38A0-4.
3-phase AC supply, 380 to 480 V.
Typical motor power in 400 V at normal use: 18.5kw.
Current rating represents the rated continuous drive output current inside the drive specification.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 38.0A.
Frame size: R4.
Typical motor power in 460 V at normal use: 25.0hp.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
This code states the factory installed SW variants to the drive.
ABB Inverter ACS355-03X-12A5-4
Product Name: Inverter.
Model: ACS355-03X-12A5-4.
3-phase AC supply, 380 to 480 V.
This code states the factory installed SW variants to the drive.
Typical motor power in 460 V at normal use: 7.5hp.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 12.5A.
Frame size: R3.
Current rating represents the rated continuous drive output current inside the drive specification.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
Typical motor power in 400 V at normal use: 5.5kw.
Product Name: Inverter.
Model: ACS355-03X-12A5-4.
3-phase AC supply, 380 to 480 V.
This code states the factory installed SW variants to the drive.
Typical motor power in 460 V at normal use: 7.5hp.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 12.5A.
Frame size: R3.
Current rating represents the rated continuous drive output current inside the drive specification.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
Typical motor power in 400 V at normal use: 5.5kw.
ABB Inverter ACS355-03X-15A6-4
Product Name: Inverter.
Model: ACS355-03X-15A6-4.
This code states the factory installed SW variants to the drive.
Typical motor power in 400 V at normal use: 7.5kw.
Typical motor power in 460 V at normal use: 10.0hp.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 15.6A.
Frame size: R3.
Current rating represents the rated continuous drive output current inside the drive specification.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
3-phase AC supply, 380 to 480 V.
Product Name: Inverter.
Model: ACS355-03X-15A6-4.
This code states the factory installed SW variants to the drive.
Typical motor power in 400 V at normal use: 7.5kw.
Typical motor power in 460 V at normal use: 10.0hp.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 15.6A.
Frame size: R3.
Current rating represents the rated continuous drive output current inside the drive specification.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
3-phase AC supply, 380 to 480 V.
404 Results 12/Page Page 12 of 34 [First Page] << Previous 8 9 10 11 12 13 14 15 16 17 Next >> [Last Page]