Mennekes Receptacle 1755
Product Name:Wall mounted receptacle with TwinCONTACT.
Part No.:1755.
Ampere:16 A.
Poles:5 p.
Voltage:110V.
Earth position:4 h.
Hertz:50-60 Hz.
Connection technology:Screwless - TwinCONTACT.
Contact:standard.
Protection type:IP44.
screwless spring terminals.
suitable for through wiring.
internal fixing.
one cable entry at top and two blind entries (can be cut out) at bottom.
enclosure base can be turned 180°.
receptacles are designed for adding an auxiliary contact switch..
Product Name:Wall mounted receptacle with TwinCONTACT.
Part No.:1755.
Ampere:16 A.
Poles:5 p.
Voltage:110V.
Earth position:4 h.
Hertz:50-60 Hz.
Connection technology:Screwless - TwinCONTACT.
Contact:standard.
Protection type:IP44.
screwless spring terminals.
suitable for through wiring.
internal fixing.
one cable entry at top and two blind entries (can be cut out) at bottom.
enclosure base can be turned 180°.
receptacles are designed for adding an auxiliary contact switch..
Mennekes Receptacle 418
Product Name:Wall mounted receptacle with TwinCONTACT.
Part No.:418.
Ampere:16 A.
Poles:4 p.
Voltage:400V.
Earth position:6 h.
Hertz:50-60 Hz.
Connection technology:Screwless - TwinCONTACT.
Contact:standard.
Protection type:IP44.
screwless spring terminals.
suitable for through wiring.
internal fixing.
one cable entry at top and two blind entries (can be cut out) at bottom.
enclosure base can be turned 180°.
receptacles are designed for adding an auxiliary contact switch..
Product Name:Wall mounted receptacle with TwinCONTACT.
Part No.:418.
Ampere:16 A.
Poles:4 p.
Voltage:400V.
Earth position:6 h.
Hertz:50-60 Hz.
Connection technology:Screwless - TwinCONTACT.
Contact:standard.
Protection type:IP44.
screwless spring terminals.
suitable for through wiring.
internal fixing.
one cable entry at top and two blind entries (can be cut out) at bottom.
enclosure base can be turned 180°.
receptacles are designed for adding an auxiliary contact switch..
ABB Inverter ACS800-01-0140-5
Product Name: Inverter.
Model: ACS800-01-0140-5.
UN = 500 V (Range 380 to 500 V). The power ratings are valid at nominal voltage 500 V.
Rated current available continuously without overloadability at 40 °C: 180A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 282A.
Frame size: R6.
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 163A.
Typical motor power in light-overload use: 110Kw.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 141A.
Typical motor power in heavy-duty use: 90KW.
Typical motor power in no-overload use: 110KW
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
Product Name: Inverter.
Model: ACS800-01-0140-5.
UN = 500 V (Range 380 to 500 V). The power ratings are valid at nominal voltage 500 V.
Rated current available continuously without overloadability at 40 °C: 180A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 282A.
Frame size: R6.
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 163A.
Typical motor power in light-overload use: 110Kw.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 141A.
Typical motor power in heavy-duty use: 90KW.
Typical motor power in no-overload use: 110KW
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
Mennekes Cepex flush mounted receptacle SCHUKO 4979
Product Name:Cepex panel mounted receptacle SCHUKO?
Part No.:4979.
Ampere :16A.
Poles:2p.
Voltage:230V.
Earth position:0h.
Hertz:50-60 Hz.
Shutter:no.
Protection type:IP44.
alpine white or pearl white.
screw terminals.
suitable for installation in cable ducts and columns.
meeting DIN 18032 standards for ball rebound.
Product Name:Cepex panel mounted receptacle SCHUKO?
Part No.:4979.
Ampere :16A.
Poles:2p.
Voltage:230V.
Earth position:0h.
Hertz:50-60 Hz.
Shutter:no.
Protection type:IP44.
alpine white or pearl white.
screw terminals.
suitable for installation in cable ducts and columns.
meeting DIN 18032 standards for ball rebound.
Mennekes Cepex flush mounted receptacle SCHUKO 4971
Product Name:Cepex panel mounted receptacle SCHUKO?
Part No.:4971.
Ampere :16A.
Poles:2p.
Voltage:230V.
Earth position:0h.
Hertz:50-60 Hz.
Shutter:no.
Protection type:IP44.
alpine white or pearl white.
screw terminals.
suitable for installation in cable ducts and columns.
meeting DIN 18032 standards for ball rebound.
Product Name:Cepex panel mounted receptacle SCHUKO?
Part No.:4971.
Ampere :16A.
Poles:2p.
Voltage:230V.
Earth position:0h.
Hertz:50-60 Hz.
Shutter:no.
Protection type:IP44.
alpine white or pearl white.
screw terminals.
suitable for installation in cable ducts and columns.
meeting DIN 18032 standards for ball rebound.
Mennekes Grounding-type panel mounted receptacle 11180
Product Name:Grounding-type panel mounted receptacle
Part No.:11180.
Ampere :16A.
Poles:2p+E.
Voltage:230V.
Shutter:yes.
Connection technology:Screw terminals.
Contact:standard.
Protection type:IP44.
French-belgian standard.
with hinged lid.
3 screw terminals as connecting terminals for 1.5 - 2.5 mm2.
other colours on request.
Product Name:Grounding-type panel mounted receptacle
Part No.:11180.
Ampere :16A.
Poles:2p+E.
Voltage:230V.
Shutter:yes.
Connection technology:Screw terminals.
Contact:standard.
Protection type:IP44.
French-belgian standard.
with hinged lid.
3 screw terminals as connecting terminals for 1.5 - 2.5 mm2.
other colours on request.
Mennekes Cepex grounding-type mounted receptacle 4904
Product Name:Cepex grounding-type mounted receptacle
Part No.:4904.
Ampere :16A.
Poles:2P.
Voltage:230V.
Shutter:no.
Protection type:IP44.
french-belgian standard.
screw terminals.
for installation in cable ducts and collumns.
meeting DIN 18032 standards for ball rebound.
Product Name:Cepex grounding-type mounted receptacle
Part No.:4904.
Ampere :16A.
Poles:2P.
Voltage:230V.
Shutter:no.
Protection type:IP44.
french-belgian standard.
screw terminals.
for installation in cable ducts and collumns.
meeting DIN 18032 standards for ball rebound.
Mennekes Wall mounted receptacle 9531
Product Name:Wall mounted receptacle
Part No.9532.
Ampere :16A.
Poles:7P.
Voltage:400V.
Earth position:6h.
Hertz:50-60 Hz.
Connection technology:Screw terminals.
Contact:nickel plated contacts, highly heat resistant contact carrier.
Protection type:IP67.
screw terminals.
enclosure material PBT, free of halogens, highly resistant to chemicals.
with highly heat resistant contact carrier.
nickel plated contacts.
2 external fixings.
one cable entry at top, two blind cable entries (can be cut out) at the bottom.
enclosure can be turned 180°.
receptacles are designed for adding an auxiliary contact switch.
Product Name:Wall mounted receptacle
Part No.9532.
Ampere :16A.
Poles:7P.
Voltage:400V.
Earth position:6h.
Hertz:50-60 Hz.
Connection technology:Screw terminals.
Contact:nickel plated contacts, highly heat resistant contact carrier.
Protection type:IP67.
screw terminals.
enclosure material PBT, free of halogens, highly resistant to chemicals.
with highly heat resistant contact carrier.
nickel plated contacts.
2 external fixings.
one cable entry at top, two blind cable entries (can be cut out) at the bottom.
enclosure can be turned 180°.
receptacles are designed for adding an auxiliary contact switch.
Mennekes Receptacle 2684
Product Name:Receptacle
Part No.2648.
Ampere :16A.
Poles:3P.
Voltage:50-500V.
Earth position:1h.
Connection technology:Screw terminals.
Contact:standard .
Protection type:IP44.
screw terminals.
internal fixing.
one cable entry at top and one blind entry (can be cut out) at the bottom.
enclosure base can be turned 180° (for 5-pole design).
Product Name:Receptacle
Part No.2648.
Ampere :16A.
Poles:3P.
Voltage:50-500V.
Earth position:1h.
Connection technology:Screw terminals.
Contact:standard .
Protection type:IP44.
screw terminals.
internal fixing.
one cable entry at top and one blind entry (can be cut out) at the bottom.
enclosure base can be turned 180° (for 5-pole design).
240 Results 12/Page Page 12 of 20 [First Page] << Previous 8 9 10 11 12 13 14 15 16 17 Next >> [Last Page]