OMRON CPU Backplane C500-BC081(3G2A5-BC081)
Model: C500-BC081(3G2A5-BC081).
8 slots(3 linkable slots).

OMRON Transistor Output Unit C500-OC223(3G2A5-OC223)

Mitsubishi Memory card Q1MEM-512S
Product: Memory card.
Model: Q1MEM-512S.
Outline: RAM memory card (JEIDA Ver.4.1 compliant), RAM capacity: 512 KB.

Mitsubishi Memory card Q1MEM-256SE
Product: Memory card.
Model: Q1MEM-256SE.
Outline: SRAM+E2PROM memory card (JEIDA Ver.4.1 compliant), RAM capacity: 128 KB, E2PROM capacity: 128 KB.

Mitsubishi AC Input Module A1SX10
Product: AC Input Module.
Model: A1SX10.
Outline: 16 points, 100 to 120 V AC, 6 mA, response time: 35 ms, 16 points/common, 20-point terminal block.

Mitsubishi SSCNET III cable MR-J3BUS50M-B

Mitsubishi Bus connection unit GT15-75ABUSL

Mitsubishi GT10 Touch screen GT1020-LWDW

Mitsubishi Inverter FR-E740-0.4K
Product Name: Inverter.
Model: FR-E740-0.4K.
0.4 KW.
Rated voltage: Three-phase 380 to 480V.
Applicable motor capacity: 0.4 kW.
Rated input AC (DC) voltage/frequency: Three-phase 380 to 480V 50Hz/60Hz (283 to 339VDC).
Protective structure: Enclosed type (IP20). IP40 for totally enclosed structure series.
Cooling system: Self-cooling.
Approx. mass: 1.4 Kg.

Proface HMI(Advanced Display) PFXSP5600WAD
Product Name: HMI.
Model: PFXSP5600WAD.
Display Area: W261.12 x H163.2mm[W10.28 x H6.43in] .
Programming Memory: 64MB (CFast card).
Graphic Display Resolution: 1, 200 x 800 pixels (WXGA) .
Display Type and Size: 12.1inch TFT Color LCD.
Display Colors: 262, 144 colors.
Input Voltage: 12 to 24 Vdc.
Power Consumption: 45W max .

Proface Accessories CA3-CBLCBT422-01
connects a standard rs-422 cable (GP Connector, D-Sub 25-pin) to the GP(20CM)

ABB Inverter ACS800-01-0255-5
Product Name: Inverter.
Model: ACS800-01-0255-5.
UN = 500 V (Range 380 to 500 V). The power ratings are valid at nominal voltage 500 V.
Rated current available continuously without overloadability at 40 °C: 290A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 351A.
Typical motor power in no-overload use: 200KW
Frame size: R6.
Typical motor power in light-overload use: 200Kw.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 234A.
Typical motor power in heavy-duty use: 160KW.
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 285A.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.