ABB Inverter ACS355-03X-04A1-4
Product Name: Inverter.
Model: ACS355-03X-04A1-4.
3-phase AC supply, 380 to 480 V.
Typical motor power in 400 V at normal use: 1.5kw.
This code states the factory installed SW variants to the drive.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 4.1A.
Frame size: R1.
Current rating represents the rated continuous drive output current inside the drive specification.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
Typical motor power in 460 V at normal use: 2.0hp.
Product Name: Inverter.
Model: ACS355-03X-04A1-4.
3-phase AC supply, 380 to 480 V.
Typical motor power in 400 V at normal use: 1.5kw.
This code states the factory installed SW variants to the drive.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 4.1A.
Frame size: R1.
Current rating represents the rated continuous drive output current inside the drive specification.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
Typical motor power in 460 V at normal use: 2.0hp.
ABB Inverter ACS355-03X-15A6-4
Product Name: Inverter.
Model: ACS355-03X-15A6-4.
This code states the factory installed SW variants to the drive.
Typical motor power in 400 V at normal use: 7.5kw.
Typical motor power in 460 V at normal use: 10.0hp.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 15.6A.
Frame size: R3.
Current rating represents the rated continuous drive output current inside the drive specification.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
3-phase AC supply, 380 to 480 V.
Product Name: Inverter.
Model: ACS355-03X-15A6-4.
This code states the factory installed SW variants to the drive.
Typical motor power in 400 V at normal use: 7.5kw.
Typical motor power in 460 V at normal use: 10.0hp.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 15.6A.
Frame size: R3.
Current rating represents the rated continuous drive output current inside the drive specification.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
3-phase AC supply, 380 to 480 V.
Mennekes Compact network distributor 25715
Product Name:Compact network distributor
Part No.25715.
Fitted with :4 SCHUKO? 16A, 230V.
1 Cepex data port socket with 2 RJ45 connection module couplings,
type E-DAT module, port, cat.6, brand: BTR.
Connection/feeder cable：2 M 25 at the top (closed).
1 M 25 at the bottom (with cable gland).
1 M 25 3 x 5-7 at the bottom (with cable gland).
(seal insert for 2 individual cables up to 8 mm ?).
with terminal for 1 cable up to 5 x 4 mm2.
Enclosure size:160 x 245 mm (H x W).
Protection type:IP44.
network enclosure made of AMAPLAST.
protection class IP 44.
top part electric grey RAL 7035 or yellow RAL 1021, bottom part black with screw-in nuts for installation of a floor-mounted base.
including a height-adjustable mounting rail.
cable gland set with multiple seal.
Product Name:Compact network distributor
Part No.25715.
Fitted with :4 SCHUKO? 16A, 230V.
1 Cepex data port socket with 2 RJ45 connection module couplings,
type E-DAT module, port, cat.6, brand: BTR.
Connection/feeder cable：2 M 25 at the top (closed).
1 M 25 at the bottom (with cable gland).
1 M 25 3 x 5-7 at the bottom (with cable gland).
(seal insert for 2 individual cables up to 8 mm ?).
with terminal for 1 cable up to 5 x 4 mm2.
Enclosure size:160 x 245 mm (H x W).
Protection type:IP44.
network enclosure made of AMAPLAST.
protection class IP 44.
top part electric grey RAL 7035 or yellow RAL 1021, bottom part black with screw-in nuts for installation of a floor-mounted base.
including a height-adjustable mounting rail.
cable gland set with multiple seal.
Mennekes Cepex double receptacle, grey 4235
Product Name:Cepex double receptacle, grey
Part No.:4235.
Ampere :16A.
Poles:2p.
Voltage:230V.
Earth position:0h.
Hertz:50-60 Hz.
Shutter:no.
Protection type:IP44.
screw terminals.
cable entry: 1 x M 20 plugged at top, 2 x M 25 to be cut out at the bottom, 2 x M 20 to be cut out at the back side, for cables 7 up to 13 mm ?.
Product Name:Cepex double receptacle, grey
Part No.:4235.
Ampere :16A.
Poles:2p.
Voltage:230V.
Earth position:0h.
Hertz:50-60 Hz.
Shutter:no.
Protection type:IP44.
screw terminals.
cable entry: 1 x M 20 plugged at top, 2 x M 25 to be cut out at the bottom, 2 x M 20 to be cut out at the back side, for cables 7 up to 13 mm ?.
Mennekes Name:Receptacle strip 95472
Product Name:Receptacle strip
Part No.:95472.
Fitted with:3 CEE 16A, 5p, 400V
Fusing:1 RCD 40A, 4p, 0.03A.
Connection/feeder cable:for 1 cable up to 5 x 10mm2.
Enclosure size:410 x 97 mm (H x W).
Protection type: IP44.
pre-wired for installation.
enclosure electric grey RAL 7035.
enclosure and insert made of AMAPLAST.
fusing behind a transparent cover.
hanging clip enclosed.
Product Name:Receptacle strip
Part No.:95472.
Fitted with:3 CEE 16A, 5p, 400V
Fusing:1 RCD 40A, 4p, 0.03A.
Connection/feeder cable:for 1 cable up to 5 x 10mm2.
Enclosure size:410 x 97 mm (H x W).
Protection type: IP44.
pre-wired for installation.
enclosure electric grey RAL 7035.
enclosure and insert made of AMAPLAST.
fusing behind a transparent cover.
hanging clip enclosed.
Mennekes Panel mounted inlet 3531
Product Name:Panel mounted inlet
Part No.:3531.
Ampere:16A.
Poles:3p.
Voltage:230V.
Earth position:6h.
Hertz 50-60Hz.
Connection technology:screw terminals.
Contact:standard.
Protection type IP67.
screw terminals.
with protective cover.
Product Name:Panel mounted inlet
Part No.:3531.
Ampere:16A.
Poles:3p.
Voltage:230V.
Earth position:6h.
Hertz 50-60Hz.
Connection technology:screw terminals.
Contact:standard.
Protection type IP67.
screw terminals.
with protective cover.
Mennekes Cepex wall mounted receptacle 4135
PProduct Name:Cepex wall mounted receptacle
Part No.:4135.
Ampere:16A.
Poles:5p.
Voltage:400V.
Earth position: 6h.
Hertz 50-60Hz.
Protection type IP44.
screw terminals.
with labelling field.
cable entry: 1 x M 25 with cable gland at top, 1 x M 25 to be cut out at the bottom, 1 x M 20 to be cut out at the back side, for cables 7 up to 13 mm ?.
PProduct Name:Cepex wall mounted receptacle
Part No.:4135.
Ampere:16A.
Poles:5p.
Voltage:400V.
Earth position: 6h.
Hertz 50-60Hz.
Protection type IP44.
screw terminals.
with labelling field.
cable entry: 1 x M 25 with cable gland at top, 1 x M 25 to be cut out at the bottom, 1 x M 20 to be cut out at the back side, for cables 7 up to 13 mm ?.
Mennekes Panel mounted receptacle 3507
Product Name:Panel mounted receptacle
Part No.:3507.
Ampere:63A.
Poles:5p.
Voltage:500V.
Earth position :7h.
Hertz 50-60Hz.
Connection technology:screw terminals., SoftCONTACT.
Contact: standrad.
Protection type IP67.
screw terminals.
SoftCONTACT.
20° inclination.
receptacles with pilot contact: part no. + index P.
Product Name:Panel mounted receptacle
Part No.:3507.
Ampere:63A.
Poles:5p.
Voltage:500V.
Earth position :7h.
Hertz 50-60Hz.
Connection technology:screw terminals., SoftCONTACT.
Contact: standrad.
Protection type IP67.
screw terminals.
SoftCONTACT.
20° inclination.
receptacles with pilot contact: part no. + index P.
Mennekes Panel mounted receptacle 3581
Product Name:Panel mounted receptacle with TwinCONTACT
Part No.:3581.
Ampere:32A.
Poles:4p.
Voltage:400V.
Earth position :6h.
Hertz 50-60Hz.
Connection technology:Screwless - TwinCONTACT.
Contact: standrad.
Protection type IP67.
screwless spring terminals.
standard flange dimensions.
suitable for through wiring.
20° inclination.
receptacles optional fitted with auxiliary contact.
Product Name:Panel mounted receptacle with TwinCONTACT
Part No.:3581.
Ampere:32A.
Poles:4p.
Voltage:400V.
Earth position :6h.
Hertz 50-60Hz.
Connection technology:Screwless - TwinCONTACT.
Contact: standrad.
Protection type IP67.
screwless spring terminals.
standard flange dimensions.
suitable for through wiring.
20° inclination.
receptacles optional fitted with auxiliary contact.
Mennekes Name:Receptacle strip 95470
Product Name:Receptacle strip
Part No.:95470.
Fitted with:2 CEE 16A, 5p, 400V
1 SCHUKO? 16A, 230V.
Fusing:1 RCD 40A, 4p, 0.03A.
Connection/feeder cable:for 1 cable up to 5 x 10mm2.
Enclosure size:410 x 97 mm (H x W).
Protection type: IP44.
pre-wired for installation.
enclosure grey RAL 7035.
enclosure and insert made of AMAPLAST.
hanging clip enclosed.
Product Name:Receptacle strip
Part No.:95470.
Fitted with:2 CEE 16A, 5p, 400V
1 SCHUKO? 16A, 230V.
Fusing:1 RCD 40A, 4p, 0.03A.
Connection/feeder cable:for 1 cable up to 5 x 10mm2.
Enclosure size:410 x 97 mm (H x W).
Protection type: IP44.
pre-wired for installation.
enclosure grey RAL 7035.
enclosure and insert made of AMAPLAST.
hanging clip enclosed.
Mennekes EverGUM receptacle combination 70030
Product Name:EverGUM receptacle combination
Part No.:70030.
Fitted with:1 CEE 32A, 5p, 400V
2 SCHUKO? 16A, 230V.
Fusing:1 RCD 40A, 4p, 0.03A
2 MCB′s 16A, 1p, B.
Pre-fuse max:32A.
InA:32A.
RDF:0.75.
Connection/feeder cable:2 m H07RN-F5G4 with CEE-plug 32A, 5p, 400V.
Enclosure size:445 x 135 mm (H x W).
Protection type IP44.
solid rubber enclosure, signal yellow RAL 1003.
pre-wired for installation.
Product Name:EverGUM receptacle combination
Part No.:70030.
Fitted with:1 CEE 32A, 5p, 400V
2 SCHUKO? 16A, 230V.
Fusing:1 RCD 40A, 4p, 0.03A
2 MCB′s 16A, 1p, B.
Pre-fuse max:32A.
InA:32A.
RDF:0.75.
Connection/feeder cable:2 m H07RN-F5G4 with CEE-plug 32A, 5p, 400V.
Enclosure size:445 x 135 mm (H x W).
Protection type IP44.
solid rubber enclosure, signal yellow RAL 1003.
pre-wired for installation.
404 Results 12/Page Page 11 of 34 [First Page] << Previous 7 8 9 10 11 12 13 14 15 16 Next >> [Last Page]