Home >> Products >> 72
ABB Inverter ACS800-01-0040-5
Product Name: Inverter.
Model: ACS800-01-0040-5.
UN = 500 V (Range 380 to 500 V). The power ratings are valid at nominal voltage 500 V.
Rated current available continuously without overloadability at 40 °C: 48A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 72A.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 44A.
Typical motor power in light-overload use: 30Kw.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 36A.
Typical motor power in heavy-duty use: 22KW.
Frame size: R4.
Typical motor power in no-overload use: 30KW
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
Mitsubishi MELSECNET/10 network module AJ72QLP25G
Model: AJ72QLP25G.
MELSECNET/10 Remote I / O network.
Remote station I / O.
Optical loop system.
Cable Connection: Optical GI-50/125.
Transmission format: double loop.
Size: 250(H)×79.5(W)×121(D)mm.
Weight: 0.53kg.
Mennekes Stainless steel receptacle combination 83725
Product Name:Stainless steel receptacle combination
Part No.:83725.
Fitted with:1 CEE 16A, 5p, 400V
4 SCHUKO? 16A, 230V.
Fusing:1 RCD 40A, 4p, 0.03A
1 MCB 16A, 3p, C
4 MCB′s 16A, 1p, B.
Pre-fuse max:40A.
InA :32A.
RDF:0.8.
Connection/feeder cable:for 2 cable up to 5 x 25mm2.
Enclosure size:530 x 400 x 220 mm (H x W x D).
Protection type IP44.
stainless steel enclosure (material 1.4301).
surface with a flat finish (K240), material 1.4571 on request.
protection type IP 44 with closed door.
fusing behind a transparent cover.
Mennekes Cepex flush mounted receptacle SCHUKO 4972
Product Name:Cepex flush mounted receptacle SCHUKO?
Part No.:4972.
Ampere :16A.
Poles:2p.
Voltage:230V.
Earth position:0h.
Hertz:50-60 Hz.
Shutter:no.
Protection type:IP44.
pearl white.
screw terminals.
with flush mounted installation box.
meeting DIN 18032 standards for ball rebound.
Mennekes Wall mounted receptacle 7217
Product Name:Wall mounted receptacle
Part No.:7217.
Ampere:16A.
Poles:4p.
Voltage:400V.
Earth position :6h.
Hertz50-60 Hz.
Connection technology:screw terminals.
Contact:standard.
Protection type IP44.
screw terminals.
switched.
mechanical DUO-interlock.
circuit breaker, K-characteristics.
receptacles can be padlocked.
Mennekes Wall mounted receptacle 7283
Product Name:Wall mounted receptacle
Part No.:7283.
Ampere:16A.
Poles:3p.
Voltage:230V.
Earth position :6h.
Hertz50-60 Hz.
Connection technology:screw terminals.
Contact: nickel plated contacts, highly heat resistant contact carrier.
Protection type IP67.
screw terminals.
highly resistant to chemicals
highly heat resistant contact carrier.
nickel plated contacts.
switched.
mechanical DUO-interlock.
receptacles can be padlocked.
Mennekes Receptacle 1720
Product Name:Wall mounted receptacle with TwinCONTACT.
Part No.:1720.
Ampere:16 A.
Poles:3 p.
Voltage:230V.
Earth position:6 h.
Hertz:50-60 Hz.
Connection technology:Screwless - TwinCONTACT.
Contact:standard.
Protection type:IP44.
screwless spring terminals
suitable for through wiring
internal fixing
one cable entry at top and one blind entry (can be cut out) at bottom
enclosure base can be turned 180°
Mennekes Receptacle 1725
Product Name:Wall mounted receptacle with TwinCONTACT.
Part No.:1725.
Ampere:16 A.
Poles:4 p.
Voltage:500V.
Earth position:7 h.
Hertz:50-60 Hz.
Connection technology:Screwless - TwinCONTACT.
Contact:standard.
Protection type:IP44.
screwless spring terminals
suitable for through wiring
internal fixing
one cable entry at top and one blind entry (can be cut out) at bottom
enclosure base can be turned 180°
254 Results 12/Page Page 10 of 22     [First Page] << Previous 6 7 8 9 10 11 12 13 14 15 Next >> [Last Page]