Mitsubishi Power Distribution Module FX3U-1PSU-5V

OMRON Limit Switches SHL-D55-MR

Mennekes Wall mounted receptacle 1556
Product Name:Wall mounted receptacle
Part No.:1556.
Ampere:32A.
Poles:5p.
Voltage:230V.
Earth position:9h.
Hertz:50-60 Hz.
Connection technology:screw terminals.
Contact:standard.
Protection type:IP44.
screw terminals.
internal fixing.
one cable entry at top, two blind cable entries (can be cut out) at bottom.
enclosure base can be turned 180°.
receptacles are designed for adding an auxiliary contact switch..

Mennekes AMAXX receptacle combination 940026
Product Name:AMAXX? receptacle combination
Part No.:940026.
Fitted with:1 CEE 32A, 4p, 400V
2 CEE 16A, 4p, 400V
2 french/belg. standard 16A, 2p+E, 230V.
Fusing:1 RCD 63A, 4p, 0.03A
1 MCB 32A, 3p, C
2 MCB′s 16A, 3p, C
2 MCB′s 16A, 1p+N, C.
Pre-fuse max.:63A.
InA:44A.
RDF:0.55.
Connection/feeder cable:for 2 cable up to 5 x 25mm2.
Enclosure size:520 x 225 mm (H x W).
Protection type IP44.
pre-wired for installation.
hinged to the side.
enclosure and insert made of AMAPLAST.
fusing behind a transparent cover.

Mitsubishi Power supply module A61PEU
Model: A61PEU.
Input: AC100 ~ 120V/AC200 ~ 240V.
Output: DC5V 8A.
Size: 250(H)×55(W)×121(D)mm.
Weight: 0.80kg.

Mitsubishi DC Input/Relay Output Module AJ55TB32-4DR

ABB Inverter ACS800-01-0165-3

ABB Inverter ACS800-01-0100-7
Product Name: Inverter.
Model: ACS800-01-0100-7.
Frame size: R6.
Rated current available continuously without overloadability at 40 °C: 93A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 124A.
Typical motor power in no-overload use: 90KW
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 86A.
Typical motor power in light-overload use: 75Kw.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 62A.
Typical motor power in heavy-duty use: 55KW.
UN = 690 V (Range 525 to 690 V). The power ratings are valid at nominal voltage 690 V.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.

Proface HMI AGP3600-T1-D24-D81C
Product Name: HMI(w/dicrete i/o).
Model: AGP3500-T1-D24-D81C(Source).
Display Type and Size: TFT Color LCD(12.1in).
Touch Screen: Resistive Film(analog).
Display Colors: 65536 COLRS(NO Blink)/16384 colors(blink).
Display Area: W248 x H186.5 mm [W9.76 x H7.34 in].
CF Card: 1 slot, type II.
Serial Ports (COM1): RS-232C/422/485.
Graphic Display Resolution: 800*600 pixels(VGA).
Backlight: LED OR CCFL.
Programming Memory: 16mb flash EPROM.
Input Voltage: 24 VDC.
Ethernet: yes.

Mennekes Panel mounted receptacle 1619
Product Name:Panel mounted receptacle
Part No.:1619.
Ampere:16A.
Poles:3p.
Voltage:230V.
Earth position :6h.
Hertz 50-60Hz.
Connection technology:Screwless - TwinCONTACT.
Contact: standrad.
Protection type IP44.
screwless spring terminals.
suitable for through wiring.
flange: 55 x 55 mm.
fixing hole spacing: 45 x 45 mm.
straight.

ABB Inverter ACS800-01-0006-5
Product Name: Inverter.
Model: ACS800-01-0006-5.
UN = 500 V (Range 380 to 500 V). The power ratings are valid at nominal voltage 500 V.
Rated current available continuously without overloadability at 40 °C: 8.1A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 10.8A.
Typical motor power in no-overload use: 4KW
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 7.7A.
Typical motor power in light-overload use: 4Kw.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 5.6A.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
Frame size: R2.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
Typical motor power in heavy-duty use: 3KW.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.

Mitsubishi DC Input/Transistor Output Module AJ55TB32-4DT