Mennekes Name:Receptacle strip 95470
Product Name:Receptacle strip
Part No.:95470.
Fitted with:2 CEE 16A, 5p, 400V
1 SCHUKO? 16A, 230V.
Fusing:1 RCD 40A, 4p, 0.03A.
Connection/feeder cable:for 1 cable up to 5 x 10mm2.
Enclosure size:410 x 97 mm (H x W).
Protection type: IP44.
pre-wired for installation.
enclosure grey RAL 7035.
enclosure and insert made of AMAPLAST.
hanging clip enclosed.
Product Name:Receptacle strip
Part No.:95470.
Fitted with:2 CEE 16A, 5p, 400V
1 SCHUKO? 16A, 230V.
Fusing:1 RCD 40A, 4p, 0.03A.
Connection/feeder cable:for 1 cable up to 5 x 10mm2.
Enclosure size:410 x 97 mm (H x W).
Protection type: IP44.
pre-wired for installation.
enclosure grey RAL 7035.
enclosure and insert made of AMAPLAST.
hanging clip enclosed.
Mennekes Data module 41452
Product Name:Data module
Part No.41452. TKM, Type: Data port insert 2 x RJ45, cat.6, type KDMF.
suitable for Cepex receptacles, part no. 4300 and versions.
Product Name:Data module
Part No.41452. TKM, Type: Data port insert 2 x RJ45, cat.6, type KDMF.
suitable for Cepex receptacles, part no. 4300 and versions.
Mennekes Data module 41455
Product Name:Data module
Part No.41455. BTR, Type: RJ45 connection module (type E-DATmodule 8(8) jack cat. 6).
suitable for Cepex receptacles, part no. 4340 and versions.
Product Name:Data module
Part No.41455. BTR, Type: RJ45 connection module (type E-DATmodule 8(8) jack cat. 6).
suitable for Cepex receptacles, part no. 4340 and versions.
Mennekes Connector PowerTOP Xtra 14131
Product Name:Connector PowerTOP? Xtra
Part No.:14131.
Ampere:63A.
Poles:5p
Voltage:400V.
Earth position:6h.
Hertz 50-60Hz.
Connection technology:screw terminals., SoftCONTACT.
Contact:nickel plated contacts, highly heat resistant contact carrier.
Protection type IP44.
screw terminals.
with rubberised grip area.
frame terminals.
with SoftCONTACT.
with highly heat resistant contact carrier.
cable gland and sealing.
strain relief and protection against kinking.
enclosure with thread lock.
two safety slides.
products with pilot contact: part no. + index P.
Product Name:Connector PowerTOP? Xtra
Part No.:14131.
Ampere:63A.
Poles:5p
Voltage:400V.
Earth position:6h.
Hertz 50-60Hz.
Connection technology:screw terminals., SoftCONTACT.
Contact:nickel plated contacts, highly heat resistant contact carrier.
Protection type IP44.
screw terminals.
with rubberised grip area.
frame terminals.
with SoftCONTACT.
with highly heat resistant contact carrier.
cable gland and sealing.
strain relief and protection against kinking.
enclosure with thread lock.
two safety slides.
products with pilot contact: part no. + index P.
Mennekes Cepex panel mounted receptacle 4118
Product Name:Cepex panel mounted receptacle
Part No.:4118.
Ampere:32A.
Poles:4p.
Voltage:400V.
Earth position: 6h.
Hertz 50-60Hz.
Protection type IP44.
screw terminals.
also suitable for installation in cable ducts and columns.
meeting DIN 18032 standards for ball rebound.
Product Name:Cepex panel mounted receptacle
Part No.:4118.
Ampere:32A.
Poles:4p.
Voltage:400V.
Earth position: 6h.
Hertz 50-60Hz.
Protection type IP44.
screw terminals.
also suitable for installation in cable ducts and columns.
meeting DIN 18032 standards for ball rebound.
Mennekes Cepex wall mounted receptacle 4102
Product Name:Cepex wall mounted receptacle
Part No.:4102.
Ampere:16A.
Poles:3p.
Voltage:230V.
Earth position 6h.
Hertz 50-60Hz.
Protection type IP44.
screw terminals.
cable entry: 1 x M 25 with cable gland at top, 1 x M 25 to be cut out at the bottom, 1 x M 20 to be cut out at the back side, for cables 7 up to 13 mm ?.
meeting DIN 18032 standards for ball rebound.
Product Name:Cepex wall mounted receptacle
Part No.:4102.
Ampere:16A.
Poles:3p.
Voltage:230V.
Earth position 6h.
Hertz 50-60Hz.
Protection type IP44.
screw terminals.
cable entry: 1 x M 25 with cable gland at top, 1 x M 25 to be cut out at the bottom, 1 x M 20 to be cut out at the back side, for cables 7 up to 13 mm ?.
meeting DIN 18032 standards for ball rebound.
ABB Inverter ACS800-01-0016-3
Product Name: Inverter.
Model: ACS800-01-0016-3.
UN = 400 V (Range 380 to 415 V). The power ratings are valid at nominal voltage 400 V.
Rated current available continuously without overloadability at 40 °C: 25A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 32A.
Typical motor power in no-overload use: 11KW
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 24A.
Frame size: R3.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 19A.
Typical motor power in heavy-duty use: 7.5KW.
Typical motor power in light-overload use: 11Kw.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
Product Name: Inverter.
Model: ACS800-01-0016-3.
UN = 400 V (Range 380 to 415 V). The power ratings are valid at nominal voltage 400 V.
Rated current available continuously without overloadability at 40 °C: 25A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 32A.
Typical motor power in no-overload use: 11KW
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 24A.
Frame size: R3.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 19A.
Typical motor power in heavy-duty use: 7.5KW.
Typical motor power in light-overload use: 11Kw.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
OMRON I/O Cable CV500-CN413
I/O Cable (for Rack I/O to Backplane) 0.4 m (L) CV500-CN413
I/O Cable (for Rack I/O to Backplane) 0.4 m (L) CV500-CN413
392 Results 12/Page Page 10 of 33 [First Page] << Previous 6 7 8 9 10 11 12 13 14 15 Next >> [Last Page]