Mennekes Panel mounted receptacle 1823
Product Name:Panel mounted receptacle
Part No.1823.
Ampere :16A.
Poles:3P.
Voltage:20-25，40-50V.
Hertz:100-200 Hz.
Earth position:4 h.
Connection technology:Screw terminals.
Contact:standard.
Protection type:IP44.
screw terminals.
straight.
also suitable for cable ducts and flush mounted installation boxes.
Product Name:Panel mounted receptacle
Part No.1823.
Ampere :16A.
Poles:3P.
Voltage:20-25，40-50V.
Hertz:100-200 Hz.
Earth position:4 h.
Connection technology:Screw terminals.
Contact:standard.
Protection type:IP44.
screw terminals.
straight.
also suitable for cable ducts and flush mounted installation boxes.
Mennekes Connector CEEplus 982
Product Name:Connector CEEplus?
Part No.982.
Ampere :16A.
Poles：5 p + additional contacts.
Voltage:400V.
Earth position:6 h.
Hertz:50-60 Hz.
Connection technology:Screw terminals.
Contact:standard.
Protection type:IP44.
screw terminals.
with 4 additional contacts.
cable gland and sealing.
strain relief and protection against kinking.
enclosure with thread lock and safety slide.
Product Name:Connector CEEplus?
Part No.982.
Ampere :16A.
Poles：5 p + additional contacts.
Voltage:400V.
Earth position:6 h.
Hertz:50-60 Hz.
Connection technology:Screw terminals.
Contact:standard.
Protection type:IP44.
screw terminals.
with 4 additional contacts.
cable gland and sealing.
strain relief and protection against kinking.
enclosure with thread lock and safety slide.
Mennekes Wall mounted receptacle 1829
Product Name:Wall mounted receptacle
Part No.1829.
Ampere :16A.
Poles:2P.
Voltage:20-25,40-50V.
Hertz:(DC) Hz.
Earth position:10h.
Connection technology:Screw terminals.
Contact:standard.
Protection type:IP44.
screw terminals.
external fixing.
one cable entry at top and one blind cable entry (can be cut out) at the rear side.
Product Name:Wall mounted receptacle
Part No.1829.
Ampere :16A.
Poles:2P.
Voltage:20-25,40-50V.
Hertz:(DC) Hz.
Earth position:10h.
Connection technology:Screw terminals.
Contact:standard.
Protection type:IP44.
screw terminals.
external fixing.
one cable entry at top and one blind cable entry (can be cut out) at the rear side.
Mennekes EverGUM receptacle combination 7307682
Product Name:EverGUM receptacle combination
Part No.:7307682.
Fitted with:1 CEE 32A, 5p, 400V
2 CEE 16A, 5p, 400V
1 swiss standard type 25, 16A, 5p, 400V
3 swiss standard type 23, 16A, 3p, 230V.
Fusing:1 RCD 63A, 4p, 0.03A
1 MCB 32A, 3p, C
3 MCB′s 16A, 3p, C.
Connection/feeder cable:for 1 cable up to 5 x 16mm2.
Enclosure size:380 x 320 mm (H x W).
Protection type IP44.
solid rubber enclosure, signal yellow RAL 1003.
pre-wired for installation.
Product Name:EverGUM receptacle combination
Part No.:7307682.
Fitted with:1 CEE 32A, 5p, 400V
2 CEE 16A, 5p, 400V
1 swiss standard type 25, 16A, 5p, 400V
3 swiss standard type 23, 16A, 3p, 230V.
Fusing:1 RCD 63A, 4p, 0.03A
1 MCB 32A, 3p, C
3 MCB′s 16A, 3p, C.
Connection/feeder cable:for 1 cable up to 5 x 16mm2.
Enclosure size:380 x 320 mm (H x W).
Protection type IP44.
solid rubber enclosure, signal yellow RAL 1003.
pre-wired for installation.
Mennekes Cepex flush mounted receptacle SCHUKO 4982
Product Name:Cepex panel mounted receptacle SCHUKO?
Part No.:4982.
Ampere :16A.
Poles:2p.
Voltage:230V.
Earth position:0h.
Hertz:50-60 Hz.
Shutter:no.
Protection type:IP44.
alpine white or pearl white.
screw terminals.
suitable for installation in cable ducts and columns.
meeting DIN 18032 standards for ball rebound.
Product Name:Cepex panel mounted receptacle SCHUKO?
Part No.:4982.
Ampere :16A.
Poles:2p.
Voltage:230V.
Earth position:0h.
Hertz:50-60 Hz.
Shutter:no.
Protection type:IP44.
alpine white or pearl white.
screw terminals.
suitable for installation in cable ducts and columns.
meeting DIN 18032 standards for ball rebound.
ABB Inverter ACS800-01-0070-2
Product Name: Inverter.
Model: ACS800-01-0070-2.
UN = 230 V (Range 208 to 240 V). The power ratings are valid at nominal voltage 230 V.
Frame size: R6.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 282A.
Typical motor power in no-overload use: 55KW
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 184A.
Typical motor power in light-overload use: 55Kw.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 141A.
Typical motor power in heavy-duty use: 37KW.
Rated current available continuously without overloadability at 40 °C: 202A.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
Product Name: Inverter.
Model: ACS800-01-0070-2.
UN = 230 V (Range 208 to 240 V). The power ratings are valid at nominal voltage 230 V.
Frame size: R6.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 282A.
Typical motor power in no-overload use: 55KW
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 184A.
Typical motor power in light-overload use: 55Kw.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 141A.
Typical motor power in heavy-duty use: 37KW.
Rated current available continuously without overloadability at 40 °C: 202A.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.