Home >> Products >> 410
Mennekes Cepex wall mounted receptacle 4108
Product Name:Cepex wall mounted receptacle
Part No.:4108.
Ampere:32A.
Poles:4p.
Voltage:400V.
Earth position: 6h.
Hertz 50-60Hz.
Protection type IP44.
screw terminals.
cable entry: 1 x M 25 with cable gland at top, 1 x M 25 to be cut out at the bottom, 1 x M 20 to be cut out at the back side, for cables 7 up to 13 mm ?.
meeting DIN 18032 standards for ball rebound.
Mennekes Cepex wall mounted receptacle 4106
Product Name:Cepex wall mounted receptacle
Part No.:4106.
Ampere:32A.
Poles:3p.
Voltage:110V.
Earth position 4h.
Hertz 50-60Hz.
Protection type IP44.
screw terminals.
cable entry: 1 x M 25 with cable gland at top, 1 x M 25 to be cut out at the bottom, 1 x M 20 to be cut out at the back side, for cables 7 up to 13 mm ?.
meeting DIN 18032 standards for ball rebound.
Mennekes Connector PowerTOP Xtra 14102
Product Name:Connector PowerTOP? Xtra
Part No.:14102.
Ampere:63A.
Poles:3p
Voltage:230V.
Earth position:6h.
Hertz 50-60Hz.
Connection technology:screw terminals., SoftCONTACT.
Contact:highly heat resistant contact carrier.
Protection type IP44.
screw terminals.
with rubberised grip area.
frame terminals.
with SoftCONTACT.
with highly heat resistant contact carrier.
cable gland and sealing.
strain relief and protection against kinking.
enclosure with thread lock.
two safety slides.
products with pilot contact: part no. + index P.
Mennekes Panel mounted inlet 410
Product Name:Panel mounted inlet
Part No.:410.
Ampere:32A.
Poles:5p.
Voltage:110V.
Earth position:4h.
Hertz 50-60Hz.
Connection technology:screw terminals.
Contact:standard.
Protection type IP44.
screw terminals.
with hinged lid.
Mennekes Connector PowerTOP Xtra 14107
Product Name:Connector PowerTOP? Xtra
Part No.:14107.
Ampere:63A.
Poles:4p
Voltage:500V.
Earth position:7h.
Hertz 50-60Hz.
Connection technology:screw terminals., SoftCONTACT.
Contact:highly heat resistant contact carrier.
Protection type IP44.
screw terminals.
with rubberised grip area.
frame terminals.
with SoftCONTACT.
with highly heat resistant contact carrier.
cable gland and sealing.
strain relief and protection against kinking.
enclosure with thread lock.
two safety slides.
products with pilot contact: part no. + index P.
Mennekes Name:Receptacle strip 88677
Product Name:Receptacle strip
Part No.:88677.
Fitted with:8 SCHUKO? 16A, 230V.
insert tilted through 30o.
Connection/feeder cable:for 1 cable up to 3 x 6mm2.
Enclosure size:410 x 97 mm (H x W).
Protection type: IP44.
pre-wired for installation.
enclosure grey RAL 7035.
enclosure and insert made of AMAPLAST.
hanging clip enclosed.
Mennekes Name:Receptacle strip 95966
Product Name:Receptacle strip
Part No.:95966.
Fitted with:3 SCHUKO? 16A, 230V.
Connection/feeder cable:for 1 cable up to 5 x 2.5mm2.
Enclosure size:410 x 97 mm (H x W).
Protection type: IP44.
pre-wired for installation.
enclosure grey RAL 7035.
enclosure and insert made of AMAPLAST.
hanging clip enclosed.
Mennekes Cepex wall mounted receptacle 4107
Product Name:Cepex wall mounted receptacle
Part No.:4107.
Ampere:32A.
Poles:3p.
Voltage:230V.
Earth position: 6h.
Hertz 50-60Hz.
Protection type IP44.
screw terminals.
cable entry: 1 x M 25 with cable gland at top, 1 x M 25 to be cut out at the bottom, 1 x M 20 to be cut out at the back side, for cables 7 up to 13 mm ?.
meeting DIN 18032 standards for ball rebound.
Mennekes Cepex wall mounted receptacle 4104
Product Name:Cepex wall mounted receptacle
Part No.:4104.
Ampere:16A.
Poles:4p.
Voltage:500V.
Earth position: 7h.
Hertz 50-60Hz.
Protection type IP44.
screw terminals.
cable entry: 1 x M 25 with cable gland at top, 1 x M 25 to be cut out at the bottom, 1 x M 20 to be cut out at the back side, for cables 7 up to 13 mm ?.
meeting DIN 18032 standards for ball rebound.
Mennekes Cepex wall mounted receptacle 4105
Product Name:Cepex wall mounted receptacle
Part No.:4105.
Ampere:16A.
Poles:5p.
Voltage:400V.
Earth position: 6h.
Hertz 50-60Hz.
Protection type IP44.
screw terminals.
cable entry: 1 x M 25 with cable gland at top, 1 x M 25 to be cut out at the bottom, 1 x M 20 to be cut out at the back side, for cables 7 up to 13 mm ?.
meeting DIN 18032 standards for ball rebound.
47 Results 12/Page Page 3 of 4     << Previous 1 2 3 4 Next >>