Home >> Products >> 35
Proface HMI(Control) LT3201-A1-D24-C
Product Name: HMI(Control).
Model: LT3201-A1-D24-K(source).
Display Type and Size: Monchrome amber/red lcd(3.8in).
Graphic Display Resolution: 320*240 pixels(QVGA).
Programming Memory: 6mb flash EPROM.
Display Area: W78.8mm x H59.6mm [3.10in x 2.35in].
Built in DIO (Input): 12 points.
Built in DIO (Output): 6 points.
Touch Screen: Resistive Film(analog).
Backlight: amber/red led.
Display Colors: monochrome(8 levels).
Input Voltage: 24 VDC.
Mitsubishi Servo motor HG-SR352BJ
Product Name: Rotary servo motor.
Model: HG-SR352BJ.
Medium inertia, medium capacity.
Rated output: 3.5 kW.
Rated speed: 2000 r/min.
Oil seal: Installed.
Electromagnetic brake: Installed.
Mitsubishi Inverter FR-F740-45K
Product Name: Inverter.
Model: FR-F740-45K.
45KW.
Rated voltage: Three-phase 380 to 500 V.
Applicable motor capacity: 45 kW.
Permissible AC voltage fluctuation: 323 to 528V 50Hz/60Hz.
Power supply capacity: 80 kVA
Cooling system: Forced air cooling.
Approx. mass: 35 Kg.
Mitsubishi Servo motor HG-SR352J
Product Name: Rotary servo motor.
Model: HG-SR352J.
Medium inertia, medium capacity.
Rated output: 3.5 kW.
Rated speed: 2000 r/min.
Oil seal: Installed.
Electromagnetic brake: None.
Proface HMI(Advanced Display) PFXSP5500WAD
Product Name: HMI.
Model: PFXSP5500WAD.
Display Type and Size: 10.1inch TFT Color LCD.
Programming Memory: 64MB (CFast card).
Display Area: W216.96 x H135.6mm [W8.54 x H5.34in] .
Graphic Display Resolution: 1, 200 x 800 pixels (WXGA) .
Display Colors: 262, 144 colors.
Input Voltage: 12 to 24 Vdc.
Power Consumption: 43W max .
ABB Inverter ACS355-01X-02A4-2
Product Name: Inverter.
Model: ACS355-01X-02A4-2.
1-phase AC supply, 200 to 240 V.
Typical motor power in 400 V at normal use: 0.37kw.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 2.4A.
Frame size: R0.
Current rating represents the rated continuous drive output current inside the drive specification.
Typical motor power in 460 V at normal use: 0.5hp.
This code states the factory installed SW variants to the drive.
Mitsubishi Input/Output module A0J2-E28AR
Product: Input/Output module.
Model: A0J2-E28AR.
Outline: Input: 16 points, 100 to 120 V AC, 10 mA, response time: 35 ms, 16 points/common
Output: 12 points, 24 V DC/240 V AC, 2 A/point, 5 A/common, response time: 12 ms, 8 points/common, 3 points/common, independent contact, 36-point terminal blockblock.
404 Results 12/Page Page 6 of 34     [First Page] << Previous 2 3 4 5 6 7 8 9 10 11 Next >> [Last Page]