OMRON Communications Board C200HW-COM06-EV1
Model: C200HW-COM06-EV1.
Specifications: One RS-422/485 port, one RS-232C port, and a protocol macro function.
Model: C200HW-COM06-EV1.
Specifications: One RS-422/485 port, one RS-232C port, and a protocol macro function.
Mitsubishi Inverter FR-A720-18.5K
Product Name: Inverter.
Model: FR-A720-18.5K.
18.5KW.
Rated voltage: Three-phase 200 to 240V.
Applicable motor capacity: 18.5 kW.
Permissible AC voltage fluctuation: 170 to 242V 50Hz, 170 to 264V 60Hz.
Power supply capacity: 34 kVA
Cooling system: Forced air cooling.
Approx. mass: 13 Kg.
Product Name: Inverter.
Model: FR-A720-18.5K.
18.5KW.
Rated voltage: Three-phase 200 to 240V.
Applicable motor capacity: 18.5 kW.
Permissible AC voltage fluctuation: 170 to 242V 50Hz, 170 to 264V 60Hz.
Power supply capacity: 34 kVA
Cooling system: Forced air cooling.
Approx. mass: 13 Kg.
ABB Inverter ACS800-01-0165-5
Product Name: Inverter.
Model: ACS800-01-0165-5.
UN = 500 V (Range 380 to 500 V). The power ratings are valid at nominal voltage 500 V.
Rated current available continuously without overloadability at 40 °C: 225A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 326A.
Typical motor power in no-overload use: 132KW
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 220A.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 163A.
Typical motor power in heavy-duty use: 110KW.
Frame size: R6.
Typical motor power in light-overload use: 132Kw.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
Product Name: Inverter.
Model: ACS800-01-0165-5.
UN = 500 V (Range 380 to 500 V). The power ratings are valid at nominal voltage 500 V.
Rated current available continuously without overloadability at 40 °C: 225A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 326A.
Typical motor power in no-overload use: 132KW
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 220A.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 163A.
Typical motor power in heavy-duty use: 110KW.
Frame size: R6.
Typical motor power in light-overload use: 132Kw.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.
569 Results 12/Page Page 14 of 48 [First Page] << Previous 10 11 12 13 14 15 16 17 18 19 Next >> [Last Page]