Mitsubishi Inverter FR-E740-0.4K
Product Name: Inverter.
Model: FR-E740-0.4K.
0.4 KW.
Rated voltage: Three-phase 380 to 480V.
Applicable motor capacity: 0.4 kW.
Rated input AC (DC) voltage/frequency: Three-phase 380 to 480V 50Hz/60Hz (283 to 339VDC).
Protective structure: Enclosed type (IP20). IP40 for totally enclosed structure series.
Cooling system: Self-cooling.
Approx. mass: 1.4 Kg.

ABB Inverter ACS355-03X-01A2-4
Product Name: Inverter.
Model: ACS355-03X-01A2-4.
3-phase AC supply, 380 to 480 V.
Typical motor power in 400 V at normal use: 0.37kw.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 1.2A.
Frame size: R0.
Current rating represents the rated continuous drive output current inside the drive specification.
Typical motor power in 460 V at normal use: 0.5hp.
This code states the factory installed SW variants to the drive.

ABB Inverter ACS355-03X-07A3-4
Product Name: Inverter.
Model: ACS355-03X-07A3-4.
3-phase AC supply, 380 to 480 V.
Typical motor power in 400 V at normal use: 3.0kw.
Current rating represents the rated continuous drive output current inside the drive specification.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 7.3A.
Frame size: R1.
Typical motor power in 460 V at normal use: 3.0hp.
ACS355 is available in two voltage ranges: 2 = 200 to 240 V and 4 = 380 to 480 V.
This code states the factory installed SW variants to the drive.

Mennekes Plug SCHUKO 10838
Product Name:Plug SCHUKO?
Part No.:10838.
Ampere :16A.
Poles:2p+E.
Voltage:230V.
Shutter:no.
Connection technology:Screw terminals.
Contact:standard.
Protection type:IP44.
screw terminals.
with combined PE-conductor acc. to german and french-belgian standard.
with grommet.
for cables up to 3 x 2.5 mm2, up to H07RN-F.

ABB Inverter ACS800-01-0040-3
Product Name: Inverter.
Model: ACS800-01-0040-3.
UN = 400 V (Range 380 to 415 V). The power ratings are valid at nominal voltage 400 V.
Rated current available continuously without overloadability at 40 °C: 72A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 86A.
Typical motor power in no-overload use: 37KW
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 69A.
Typical motor power in light-overload use: 30Kw.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
Typical motor power in heavy-duty use: 22KW.
Frame size: R5.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 49A.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.

Proface HMI AGP3600-T1-AF-D81C
Product Name: HMI(w/dicrete i/o).
Model: AGP3500-T1-AF-D81C(Source).
Display Type and Size: TFT Color LCD(12.1in).
Graphic Display Resolution: 800*600 pixels(VGA).
Backlight: LED OR CCFL.
Display Area: W248 x H186.5 mm [W9.76 x H7.34 in].
CF Card: 1 slot, type II.
Serial Ports (COM1): RS-232C/422/485.
Touch Screen: Resistive Film(analog).
Display Colors: 65536 COLRS(NO Blink)/16384 colors(blink).
Programming Memory: 16mb flash EPROM.
Input Voltage: 24 VDC.
Ethernet: yes.

ABB Inverter ACS550-01-04A1-4
Product Name: Inverter.
Model: ACS550-01-04A1-4.
Typical motor power in 400 V at heavy-duty use: 1.1KW.
Wall-mounted units.
Typical motor power in 400 V at normal use: 1.5kw.
Typical motor power in 460 V at normal use: 2hp.
Continuous rms current. 10% overload is allowed for one minute in ten minutes: 4.1A.
3-phase supply voltage 380 to 480 V.
Typical motor power in 460 V at heavy-duty use: 1.5HP.
Continuous rms current. 50% overload is allowed for one minute in ten minutes: 3.3A.
Frame size: R1.

Proface HMI(Control) LT3300-T1-D24-K
Product Name: HMI(Control).
Model: LT3300-T1-D24-K(sink).
Display Type and Size: TFT Color LCD(5.7in).
Graphic Display Resolution: 320*240 pixels(QVGA).
Touch Screen: Resistive Film(analog).
Display Area: W115.2mm x H86.4mm [4.54in x 3.4in].
Built in DIO (Input): 16 points.
Built in DIO (Output): 16 points.
Display Colors: 65536 COLRS(NO Blink)/16384 colors(blink).
Backlight: whilte led.
Programming Memory: 6mb flash EPROM.
Input Voltage: 24 VDC.
Serial: RS232C/422/485.
Ethernet: yes.
I/O Expansion: 3 EXM Modules.

Proface Touch Screen PFXGP4301TAD
Product Name: Touch Screen.
Model: PFXGP4301TAD.
Graphic Display Resolution: 320*240 pixels(QVGA).
Input Voltage: 24V DC
Programming Memory: 16mb flash EPROM.
Serial Ports (COM2): RS-422/485.
Ethernet: 1.
Serial Ports(COM1): RS-232C.
SD Card: 1.
Display Type and Size: TFT Color LCD(5.7").
Display Colors: 65, 536 Colors(no blink) / 16, 384 Colors(blink).
Display Area: W 115.2 x H 86.4 mm [W 4.54 x H 3.4 in].
Touch Screen: Resistive Film(analog).
Backlight: White LED.

Mitsubishi Analog Adapter Board FX1N-2AD-BD

ABB Inverter ACS800-01-0030-5
Product Name: Inverter.
Model: ACS800-01-0030-5.
UN = 500 V (Range 380 to 500 V). The power ratings are valid at nominal voltage 500 V.
Rated current available continuously without overloadability at 40 °C: 42A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 62A.
Typical motor power in no-overload use: 22KW
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 39A.
Frame size: R4.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 32A.
Typical motor power in heavy-duty use: 18.5KW.
Typical motor power in light-overload use: 22Kw.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.

Mitsubishi Relay Output module AY11A
Model: AY11A.
Contact output: 16 points, DC24V/AC240V, 2A/1 point, 16A / All points.
Response time: 12ms.
Common all points independent.
38-point terminal block.
Size: 250(H)×37.5(W)×131(D)mm.
Weight: 0.39kg.