Mitsubishi Encoder cable MR-ENCBL5M-H

Mitsubishi Servo amplifier MR-JE-10B
Product Name: Servo amplifier.
Model: MR-JE-10B.
0.1 kW, 3-phase or 1-phase 200 V AC to 240 V AC.
Output Rated voltage: 3-phase 170 V AC.
Output Rated current: 1.1 A.
Control method: Sine-wave PWM control/current control method.
Dynamic brake: Built-in.

Mitsubishi Servo amplifier MR-JE-100A
Product Name: Servo amplifier.
Model: MR-JE-100A.
1.0 kW, 3-phase or 1-phase 200 V AC to 240 V AC.
Output Rated voltage: 3-phase 170 V AC.
Output Rated current: 6.0 A.
Control method: Sine-wave PWM control/current control method.
Dynamic brake: Built-in.

Mitsubishi Inverter FR-A720-18.5K
Product Name: Inverter.
Model: FR-A720-18.5K.
18.5KW.
Rated voltage: Three-phase 200 to 240V.
Applicable motor capacity: 18.5 kW.
Permissible AC voltage fluctuation: 170 to 242V 50Hz, 170 to 264V 60Hz.
Power supply capacity: 34 kVA
Cooling system: Forced air cooling.
Approx. mass: 13 Kg.

Mitsubishi Power supply connector MR-PWCNS3

Mitsubishi Encoder cable MR-JHSCBL10M-H

Mitsubishi Encoder cable MR-JHSCBL30M-L

ABB Inverter ACS800-01-0165-5
Product Name: Inverter.
Model: ACS800-01-0165-5.
UN = 500 V (Range 380 to 500 V). The power ratings are valid at nominal voltage 500 V.
Rated current available continuously without overloadability at 40 °C: 225A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 326A.
Typical motor power in no-overload use: 132KW
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 220A.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 163A.
Typical motor power in heavy-duty use: 110KW.
Frame size: R6.
Typical motor power in light-overload use: 132Kw.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.

Mennekes Name:Receptacle strip 96438
Product Name:Receptacle strip
Part No.:96438.
Fitted with:1 CEE 16A, 5p, 400V.
2 SCHUKO? 16A, 230V.
Connection/feeder cable:for 1 cable up to 5 x 10mm2.
Enclosure size:410 x 97 mm (H x W).
Protection type: IP44.
pre-wired for installation.
enclosure grey RAL 7035.
enclosure and insert made of AMAPLAST.
hanging clip enclosed.

Mennekes AMAXX receptacle combination 970003
Product Name:AMAXX? receptacle combination
Part No.:970003.
Fitted with:1 CEE 32A, 5p, 400V
1 CEE 16A, 5p, 400V
4 SCHUKO? 16A, 230V.
Fusing:1 MCB 32A, 3p, C
1 MCB 16A, 3p, C
4 MCB′s 16A, 1p, C.
Pre-fuse max:63A.
InA:63A.
RDF:0.85.
Connection/feeder cable:for 1 cable up to 5 x 10 mm2Enclosure size:260 x 225 mm (H x W).
Protection type IP44.
pre-wired for installation.
hinged to the side.
enclosure and insert made of AMAPLAST.
fusing behind a transparent cover.
with suspension eyes on top, grip hooks on the bottom and chain set provided.

OMRON Photoelectric Sensor E3JM-DS70R4T-G

ABB Inverter ACS800-01-0255-5
Product Name: Inverter.
Model: ACS800-01-0255-5.
UN = 500 V (Range 380 to 500 V). The power ratings are valid at nominal voltage 500 V.
Rated current available continuously without overloadability at 40 °C: 290A.
Maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% Phd: 351A.
Typical motor power in no-overload use: 200KW
Frame size: R6.
Typical motor power in light-overload use: 200Kw.
Continuous current allowing 150% Ihd for 1 min / 5 min at 40 °C: 234A.
Typical motor power in heavy-duty use: 160KW.
Continuous current allowing 110% IN for 1 min / 5 min at 40 °C: 285A.
ACS800-01 without cable connection box does not ful? ll IP21 requirements.
In -0205-3 and -0255-5 units, H1 is 977 mm and weight is 70 kg.
In -0205-3 and -0255-5 units, H1 is 994 mm, depth 424 mm and weight is 80 kg.